Canon PowerShot ELPH 130 IS Manual
Læs nedenfor 📖 manual på dansk for Canon PowerShot ELPH 130 IS (147 sider) i kategorien Kamera. Denne guide var nyttig for 5 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere
Side 1/147
Camera User Guide
ENGLISH
©CANON INC. 2013 CDD-E520-010
• Click the buttons in the lower right to access other pages.
: Next page
: Previous page
: Page before you clicked a link
• To jump to the beginning of a chapter, click the chapter
title at right.
From chapter title pages, you can access topics by
clicking their titles.
• Make sure you read this guide, including the “Safety
Precautions” section, before using the camera.
• Reading this guide will help you learn to use the camera
properly.
• Store this guide safely so that you can use it in the
future.
1
1
2
3
4
5
6
7
8
9
Cover
PreliminaryNotesand
LegalInformation
Contents:
BasicOperations
AdvancedGuide
CameraBasics
SmartAuto
Mode
OtherShooting
Modes
PMode
Wi-FiFunctions
SettingMenu
Accessories
Appendix
Index
BasicGuide
PlaybackMode
COPY
2
1
2
3
4
5
6
7
8
9
Cover
PreliminaryNotesand
LegalInformation
Contents:
BasicOperations
AdvancedGuide
CameraBasics
SmartAuto
Mode
OtherShooting
Modes
PMode
Wi-FiFunctions
SettingMenu
Accessories
Appendix
Index
BasicGuide
PlaybackMode
Preliminary Notes and Legal Information
• Take and review some test shots initially to make sure the images were
recorded correctly. Please note that Canon Inc., its subsidiaries and
afliates, and its distributors are not liable for any consequential damages
arising from any malfunction of a camera or accessory, including memory
cards, that result in the failure of an image to be recorded or to be
recorded in a way that is machine readable.
• Images recorded by the camera are intended for personal use. Refrain
from unauthorized recording that infringes on copyright law, and note that
even for personal use, photography may contravene copyright or other
legal rights at some performances or exhibitions, or in some commercial
settings.
• The camera warranty is valid only in the area of purchase. In case of
camera problems while abroad, return to the area of purchase before
contacting a Canon Customer Support Help Desk.
• Although the LCD monitor is produced under extremely high-precision
manufacturing conditions and more than 99.99% of the pixels meet
design specications, in rare cases some pixels may be defective or may
appear as red or black dots. This does not indicate camera damage or
affect recorded images.
• The LCD monitor may be covered with a thin plastic lm for protection
against scratches during shipment. If covered, remove the lm before
using the camera.
• When the camera is used over an extended period, it may become warm.
This does not indicate damage.
Package Contents
Before use, make sure the following items are included in the package.
If anything is missing, contact your camera retailer.
Camera
Battery Pack
NB-11L Battery Charger
CB-2LF/CB-2LFE
Interface Cable
IFC-400PCU
Wrist Strap
WS-800
DIGITAL CAMERA
Solution Disk*
(CD-ROM) Getting Started
Warranty Card
* Contains software and PDF manuals (=
18).
• A memory card is not included (=
2).
Compatible Memory Cards
The following memory cards (sold separately) can be used, regardless of capacity.
• SD memory cards*
• SDHC memory cards*
• SDXC memory cards*
* Cards conforming to SD standards. However, not all memory cards have been veried
to work with the camera.
COPY
3
1
2
3
4
5
6
7
8
9
Cover
PreliminaryNotesand
LegalInformation
Contents:
BasicOperations
AdvancedGuide
CameraBasics
SmartAuto
Mode
OtherShooting
Modes
PMode
Wi-FiFunctions
SettingMenu
Accessories
Appendix
Index
BasicGuide
PlaybackMode
Part Names and Conventions in This Guide
Zoom lever
Shooting: <i (telephoto)> /
< (wide angle)>j
Playback: <k (magnify)> /
< (index)>g
Lens
Speaker
Shutter button
Lamp
Power button
Microphone
Flash
Wi-Fi antenna area
Tripod socket
Memory card/battery cover
DC coupler cable port
Strap mount
• Instructions in this guide apply to the camera under default settings.
• For convenience, all supported memory cards are simply referred to as
the “memory card”.
• The tabs shown above titles indicate whether the function is used for still
images, movies, or both.
Still Images : Indicates that the function is used when shooting or
viewing still images.
Movies : Indicates that the function is used when shooting or
viewing movies.
Screen (LCD monitor)
<1 (Playback)> button
Movie button
Mode switch
AV OUT (Audio/video output) /
DIGITAL terminal
Indicator
<n> button
<b (Exposure compensation)> /
< (Wi-Fi)> / Up button
<e (Macro)> / Left button
FUNC./SET button
<h (Flash)> / Right button
<l (Display)> / Down button
• The following icons are used to indicate functions that differ depending
on the camera model:
ELPH 130 IS
IXUS 140
: Functions and precautions for the PowerShot ELPH 130
IS/IXUS 140 only
ELPH 120 IS
IXUS 135
: Functions and precautions for the PowerShot ELPH 120
IS/IXUS 135 only
• This guide uses PowerShot ELPH 130 IS/IXUS 140 illustrations and
screenshots for all explanations.
• In this guide, icons are used to represent the corresponding camera
buttons and switches on which they appear or which they resemble.
COPY
4
1
2
3
4
5
6
7
8
9
Cover
PreliminaryNotesand
LegalInformation
Contents:
BasicOperations
AdvancedGuide
CameraBasics
SmartAuto
Mode
OtherShooting
Modes
PMode
Wi-FiFunctions
SettingMenu
Accessories
Appendix
Index
BasicGuide
PlaybackMode
• The following camera buttons and controls are represented by icons.
<o> Up button on back
<q> Left button on back
<r> Right button on back
<p> Down button on back
• Shooting modes and on-screen icons and text are indicated in brackets.
• : Important information you should know
• : Notes and tips for expert camera use
• =xx: Pages with related information (in this example, “xx” represents a
page number)
COPY
5
1
2
3
4
5
6
7
8
9
Cover
PreliminaryNotesand
LegalInformation
Contents:
BasicOperations
AdvancedGuide
CameraBasics
SmartAuto
Mode
OtherShooting
Modes
PMode
Wi-FiFunctions
SettingMenu
Accessories
Appendix
Index
BasicGuide
PlaybackMode
Package Contents .........................2
Compatible Memory Cards ............2
Preliminary Notes and Legal
Information .....................................2
Part Names and Conventions in
This Guide......................................3
Table of Contents ...........................5
Contents: Basic Operations ...........6
Safety Precautions ......................... 7
Basic Guide .................... 10
Initial Preparations ....................... 11
Trying the Camera Out ................15
Included Software, PDF
Manuals .......................................18
System Map .................................22
Advanced Guide ............. 24
1 CameraBasics.....................24
On/Off ..........................................25
Shutter Button ..............................26
Shooting Display Options ............26
FUNC. Menu ................................27
MENU Menu ................................28
Indicator Display ..........................29
Clock ............................................29
2 SmartAutoMode.................30
Shooting (Smart Auto) .................31
Common, Convenient Features ... 35
Image Customization Features ....38
Helpful Shooting Features ...........40
Customizing Camera Operation ..42
3 OtherShootingModes........44
Specic Scenes ...........................45
Applying Special Effects ..............46
Special Modes for Other
Purposes ...................................... 50
4 PMode..................................54
Shooting in Program AE
([P] Mode) ....................................55
Image Brightness (Exposure
Compensation) ............................55
Color and Continuous Shooting ... 57
Shooting Range and Focusing ....60
Flash ............................................64
Other Settings ..............................65
Table of Contents 5 PlaybackMode....................66
Viewing ........................................67
Browsing and Filtering Images ....69
Image Viewing Options ................70
Protecting Images ........................72
Erasing Images ............................74
Rotating Images ........................... 76
Image Categories ........................77
Editing Still Images ......................78
Editing Movies..............................81
6 Wi-FiFunctions...................83
What You Can Do With Wi-Fi ....... 84
Using Wi-Fi to Send Images
From the Camera ......................... 85
Wi-Fi (Wireless LAN)
Precautions ..................................85
Security Precautions ....................86
Glossary ....................................... 87
Registering a Camera Nickname
(First time only) ............................88
Connecting to Web Services ........89
Connecting to a Smartphone .......91
Connecting to Another Camera ...93
Connecting to a Computer ...........94
Connecting to a Printer ................99
Sending Images .........................101
Sending Images to a Computer
via CANON iMAGE
GATEWAY ..................................103
Geotagging Images on the
Camera ......................................103
Editing or Erasing Wi-Fi
Settings ......................................104
7 SettingMenu......................106
Adjusting Basic Camera
Functions ...................................107
8 Accessories.......................113
Optional Accessories ................. 114
Using Optional Accessories ....... 115
Printing Images .......................... 117
9 Appendix............................125
Troubleshooting .........................126
On-Screen Messages ................129
On-Screen Information ..............131
Functions and Menu Tables ....... 134
Handling Precautions ................. 140
Specications ............................. 140
Index ..........................................144
COPY
6
1
2
3
4
5
6
7
8
9
Cover
PreliminaryNotesand
LegalInformation
Contents:
BasicOperations
AdvancedGuide
CameraBasics
SmartAuto
Mode
OtherShooting
Modes
PMode
Wi-FiFunctions
SettingMenu
Accessories
Appendix
Index
BasicGuide
PlaybackMode
Contents: Basic Operations
4 Shoot
Use camera-determined settings (Auto Mode) .................................... 31
Shooting people well
I
Portraits
(=
45)
P
Against Snow
(=
45)
Matching specic scenes
Low Light
(=
45)
t
Fireworks
(=
45)
Applying special effects
Vivid Colors
(=
46)
Poster Effect
(=
46)
Fish-Eye Effect
(=
46)
Miniature Effect
(=
47)
Toy Camera Effect
(=
48)
Monochrome
(=
48)
Focus on faces 31, 45, 61 .........................................................................
Without using the ash (Flash Off) ....................................................... 37
Include yourself in the shot (Self-Timer) ........................................ 35, 51
Add a date stamp ................................................................................. 37
1 View
View images (Playback Mode) ............................................................. 67
Automatic playback (Slideshow) .......................................................... 71
On a TV ............................................................................................... 115
On a computer ..................................................................................... 19
Browse through images quickly ........................................................... 69
Erase images ....................................................................................... 74
E Shoot/ViewMovies
Shoot movies ....................................................................................... 31
View movies (Playback Mode) ............................................................. 67
COPY
7
1
2
3
4
5
6
7
8
9
Cover
PreliminaryNotesand
LegalInformation
Contents:
BasicOperations
AdvancedGuide
CameraBasics
SmartAuto
Mode
OtherShooting
Modes
PMode
Wi-FiFunctions
SettingMenu
Accessories
Appendix
Index
BasicGuide
PlaybackMode
c Print
Print pictures ....................................................................................... 117
Save
Save images to a computer via a cable ............................................... 19
UseWi-FiFunctions
Send images to a smartphone ............................................................. 91
Share images online ............................................................................ 94
Send images to a computer ............................................................... 103
Safety Precautions
• Before using the product, please ensure that you read the safety precautions
described below. Always ensure that the product is used correctly.
• The safety precautions noted on the following pages are intended to
prevent injuries to yourself and other persons, or damage to the equipment.
• Be sure to also check the guides included with any separately sold
accessories you use.
Warning Denotes the possibility of serious injury or death.
• Donottriggertheashincloseproximitytopeople’seyes.
Exposure to the intense light produced by the ash could damage eyesight. In
particular, remain at least 1 meter (39 inches) away from infants when using the ash.
• Storethisequipmentoutofthereachofchildrenandinfants.
Strap: Putting the strap around a child’s neck could result in asphyxiation.
• Useonlyrecommendedpowersources.
• Donotattempttodisassemble,alterorapplyheattotheproduct.
• Avoiddroppingorsubjectingtheproducttosevereimpacts.
• Toavoidtheriskofinjury,donottouchtheinterioroftheproductif
ithasbeendroppedorotherwisedamaged.
• Stopusingtheproductimmediatelyifitemitssmoke,astrange
smell,orotherwisebehavesabnormally.
• Donotuseorganicsolventssuchasalcohol,benzine,orthinnerto
cleantheproduct.
• Donotlettheproductcomeintocontactwithwater(e.g.seawater)
orotherliquids.
• Donotallowliquidsorforeignobjectstoenterthecamera.
This could result in electrical shock or re.
If liquids or foreign objects come into contact with the camera interior,
immediately turn the camera off and remove the battery.
If the battery charger becomes wet, unplug it from the outlet and consult
your camera retailer or a Canon Customer Support Help Desk.
• Useonlytherecommendedbattery.
COPY
8
1
2
3
4
5
6
7
8
9
Cover
PreliminaryNotesand
LegalInformation
Contents:
BasicOperations
AdvancedGuide
CameraBasics
SmartAuto
Mode
OtherShooting
Modes
PMode
Wi-FiFunctions
SettingMenu
Accessories
Appendix
Index
BasicGuide
PlaybackMode
• Donotplacethebatterynearorindirectame.
• Unplugthepowercordperiodically,andusingadrycloth,wipeaway
anydustanddirtthathascollectedontheplug,theexteriorofthe
poweroutlet,andthesurroundingarea.
• Donothandlethepowercordwithwethands.
• Donotusetheequipmentinamannerthatexceedstheratedcapacity
oftheelectricaloutletorwiringaccessories.Donotuseifthepower
cordorplugaredamaged,ornotfullypluggedintotheoutlet.
• Donotallowdirtormetalobjects(suchaspinsorkeys)tocontact
theterminalsorplug.
The battery may explode or leak, resulting in electrical shock or re. This could cause
injury and damage the surroundings. In the event that a battery leaks and the battery
electrolyte contacts eyes, mouth, skin or clothing, immediately ush with water.
• Turnthecameraoffinplaceswherecamerauseisprohibited.
The electromagnetic waves emitted by the camera may interfere with the
operation of electronic instruments and other devices. Exercise adequate
caution when using the camera in places where use of electronic devices is
restricted, such as inside airplanes and medical facilities.
• DonotplaythesuppliedCD-ROM(s)inanyCDplayerthatdoesnot
supportdataCD-ROMs.
It is possible to suffer hearing loss from listening with headphones to the
loud sounds of a CD-ROM played on an audio CD player (music player).
Additionally, this could damage the speakers.
Caution Denotes the possibility of injury.
• Whenholdingthecamerabythestrap,becarefulnottobangit,subject
ittostrongimpactsorshocks,orletitgetcaughtonotherobjects.
• Becarefulnottobumporpushstronglyonthelens.
This could lead to injury or damage the camera.
• Becarefulnottosubjectthescreentostrongimpacts.
If the screen cracks, injury may result from the broken fragments.
• Whenusingtheash,becarefulnottocoveritwithyourngersorclothing.
This could result in burns or damage to the ash.
• Avoidusing,placingorstoringtheproductinthefollowingplaces:
-Placessubjecttodirectsunlight
-Placessubjecttotemperaturesabove40°C(104°F)
-Humidordustyareas
These could cause leakage, overheating or an explosion of the battery,
resulting in electrical shock, re, burns or other injuries.
High temperatures may cause deformation of the camera or battery charger casing.
• Theslideshowtransitioneffectsmaycausediscomfortwhenviewed
forprolongedperiods.
Caution Denotes the possibility of damage to the equipment.
• Donotaimthecameraatbrightlightsources(suchasthesunona
clearday).
Doing so may damage the image sensor.
• Whenusingthecameraonabeachoratawindylocation,becareful
nottoallowdustorsandtoenterthecamera.
This may cause the product to malfunction.
• Inregularuse,smallamountsofsmokemaybeemittedfromtheash.
This is due to the high intensity of the ash burning dust and foreign materials
stuck to the front of the unit. Please use a cotton swab to remove dirt, dust or other
foreign matter from the ash to prevent heat build-up and damage to the unit.
• Removeandstorethebatterywhenyouarenotusingthecamera.
If the battery is left inside the camera, damage caused by leakage may occur.
• Beforeyoudiscardthebattery,covertheterminalswithtapeorother
insulators.
Contacting other metal materials may lead to re or explosions.
• Unplugthebatterychargerfromthepoweroutletafterchargingis
complete,orwhenyouarenotusingit.
• Donotplaceanything,suchascloth,ontopofthebatterycharger
whileitischarging.
Leaving the unit plugged in for a long period of time may cause it to
overheat and distort, resulting in re.
COPY
9
1
2
3
4
5
6
7
8
9
Cover
PreliminaryNotesand
LegalInformation
Contents:
BasicOperations
AdvancedGuide
CameraBasics
SmartAuto
Mode
OtherShooting
Modes
PMode
Wi-FiFunctions
SettingMenu
Accessories
Appendix
Index
BasicGuide
PlaybackMode
• Donotplacethebatterynearpets.
Pets biting the battery could cause leakage, overheating or explosion,
resulting in re or damage.
• Donotsitdownwiththecamerainyourpocket.
Doing so may cause malfunctions or damage the screen.
• Whenputtingthecamerainyourbag,ensurethathardobjectsdo
notcomeintocontactwiththescreen.
• Donotattachanyhardobjectstothecamera.
Doing so may cause malfunctions or damage the screen.
COPY
10
1
2
3
4
5
6
7
8
9
Cover
PreliminaryNotesand
LegalInformation
Contents:
BasicOperations
AdvancedGuide
CameraBasics
SmartAuto
Mode
OtherShooting
Modes
PMode
Wi-FiFunctions
SettingMenu
Accessories
Appendix
Index
BasicGuide
PlaybackMode
Gives basic instructions, from initial preparations to
shooting, playback, and saving on a computer
4
Basic Guide
InitialPreparations...................11
TryingtheCameraOut.............15
IncludedSoftware,
PDFManuals...........................18
SystemMap..............................22
COPY
11
1
2
3
4
5
6
7
8
9
Cover
PreliminaryNotesand
LegalInformation
Contents:
BasicOperations
AdvancedGuide
CameraBasics
SmartAuto
Mode
OtherShooting
Modes
PMode
Wi-FiFunctions
SettingMenu
Accessories
Appendix
Index
BasicGuide
PlaybackMode
Initial Preparations
Prepare for shooting as follows.
Attaching the Strap
Thread the end of the strap through the
strap hole ( ), and then pull the other
end of the strap through the loop on the
threaded end ( ).
Holding the Camera
Place the strap around your wrist.
When shooting, keep your arms close to
your body and hold the camera securely
to prevent it from moving. Do not rest
your ngers on the ash.
Charging the Battery
Before use, charge the battery with the included charger. Be sure to charge
the battery initially, because the camera is not sold with the battery charged.
1 Insertthebattery.
After aligning the marks on the battery o
and charger, insert the battery by pushing
it in ( ) and down ( ).
2 Chargethebattery.
CB-2LF: Flip out the plug ( ) and plug
the charger into a power outlet ( ).
CB-2LFE: Plug the power cord into the
charger, then plug the other end into a
power outlet.
The charging lamp turns orange and
charging begins.
When charging is nished, the lamp turns
green.
3 Removethebattery.
After unplugging the battery charger,
remove the battery by pushing it in ( )
and up ( ).
• To protect the battery and keep it in optimal condition, do not charge
it continuously for more than 24 hours.
• For battery chargers that use a power cord, do not attach the
charger or cord to other objects. Doing so could result in malfunction
or damage to the product.
• For details on charging time and the number of shots and recording time
possible with a fully charged battery, see Number of Shots/Recording Time,
Playback Time (=
141).
• Charged batteries gradually lose their charge, even when they are not used.
Charge the battery on (or immediately before) the day of use.
• The charger can be used in areas with 100 – 240 V AC power (50/60 Hz). For
power outlets in a different format, use a commercially available adapter for
the plug. Never use an electrical transformer designed for traveling, which may
damage the battery.
CB-2LF
CB-2LFE
COPY
12
1
2
3
4
5
6
7
8
9
Cover
PreliminaryNotesand
LegalInformation
Contents:
BasicOperations
AdvancedGuide
CameraBasics
SmartAuto
Mode
OtherShooting
Modes
PMode
Wi-FiFunctions
SettingMenu
Accessories
Appendix
Index
BasicGuide
PlaybackMode
Inserting the Battery and Memory Card
Insert the included battery and a memory card (sold separately).
Note that before using a new memory card (or a memory card formatted
in another device), you should format the memory card with this camera
(=
109).
1 Checkthecard’swrite-protect
tab.
Recording is not possible on memory
cards with a write-protect tab when the
tab is in the locked (downward) position.
Slide the tab up until it clicks into the
unlocked position.
2 Openthecover.
Slide the cover ( ) and open it ( ).
3 Insertthebattery.
While pressing the battery lock in the
direction of the arrow, insert the battery
as shown and push it in until it clicks into
the locked position.
If you insert the battery facing the wrong
way, it cannot be locked into the correct
position. Always conrm that the battery
is facing the right way and locks when
inserted.
Terminals Battery
Lock
4 Insertthememorycard.
Insert the memory card facing as shown
until it clicks into the locked position.
Make sure the memory card is facing the
right way when you insert it. Inserting
memory cards facing the wrong way may
damage the camera.
5 Closethecover.
Lower the cover ( ) and hold it down as
you slide it, until it clicks into the closed
position ( ).
• For guidelines on how many shots or hours of recording can be saved on one
memory card, see “Number of 4:3 Shots per Memory Card” (=
141).
RemovingtheBatteryandMemoryCard
Removethebattery.
Open the cover and press the battery
lock in the direction of the arrow.
The battery will pop up.
Label
COPY
13
1
2
3
4
5
6
7
8
9
Cover
PreliminaryNotesand
LegalInformation
Contents:
BasicOperations
AdvancedGuide
CameraBasics
SmartAuto
Mode
OtherShooting
Modes
PMode
Wi-FiFunctions
SettingMenu
Accessories
Appendix
Index
BasicGuide
PlaybackMode
Removethememorycard.
Push the memory card in until it clicks,
and then slowly release it.
The memory card will pop up.
Setting the Date and Time
Set the current date and time correctly as follows if the [Date/Time] screen
is displayed when you turn the camera on. Information you specify this way
is recorded in image properties when you shoot, and it is used when you
manage images by shooting date or print images showing the date.
You can also add a date stamp to shots, if you wish (=
37).
1 Turnthecameraon.
Press the power button.
The [Date/Time] screen is displayed.
2 Setthedateandtime.
Press the < >< > buttons to choose an q r
option.
Press the < >< > buttons to specify o p
the date and time.
When nished, press the <m> button.
3 Setthehometimezone.
Press the < >< > buttons to choose q r
your home time zone.
4 Finishthesetupprocess.
Press the <m> button when nished.
After a conrmation message, the setting
screen is no longer displayed.
To turn off the camera, press the power
button.
• Unless you set the date, time, and home time zone, the [Date/Time]
screen will be displayed each time you turn the camera on. Specify
the correct information.
• To set daylight saving time (1 hour ahead), choose [ ] in step 2 and then
choose [ ] by pressing the < >< > buttons.o p
ChangingtheDateandTime
Adjust the date and time as follows.
1 Accessthecameramenu.
Press the < > button.n
COPY
14
1
2
3
4
5
6
7
8
9
Cover
PreliminaryNotesand
LegalInformation
Contents:
BasicOperations
AdvancedGuide
CameraBasics
SmartAuto
Mode
OtherShooting
Modes
PMode
Wi-FiFunctions
SettingMenu
Accessories
Appendix
Index
BasicGuide
PlaybackMode
2 Choose[Date/Time].
Move the zoom lever to choose the [ ] 3
tab.
Press the < >< > buttons to choose o p
[Date/Time], and then press the < > m
button.
3 Changethedateandtime.
Follow step 2 on =
13 to adjust the
settings.
Press the < > button to close the n
menu.
• Date/time settings can be retained for about 3 weeks by the camera’s built-in
date/time battery (backup battery) after the battery pack is removed.
• The date/time battery will be charged in about 4 hours once you insert a
charged battery or connect the camera to an AC adapter kit (sold separately,
=
114), even if the camera is left off.
• Once the date/time battery is depleted, the [Date/Time] screen will be
displayed when you turn the camera on. Follow the steps on =
13 to set the
date and time.
Display Language
Change the display language as needed.
1 EnterPlaybackmode.
Press the < > button.1
2 Accessthesettingscreen.
Press and hold the < > button, and m
then immediately press the < > n
button.
3 Setthedisplaylanguage.
Press the < >< >< >< > buttons to o p q r
choose a language, and then press the
< > button.m
Once the display language has been set,
the setting screen is no longer displayed.
• The current time is displayed if you wait too long in step 2 after pressing the
< > button before you press the < > button. In this case, press the m n
< > button to dismiss the time display and repeat step 2.m
• You can also change the display language by pressing the < > button n
and choosing [Language ] on the [ ] tab.3
COPY
15
1
2
3
4
5
6
7
8
9
Cover
PreliminaryNotesand
LegalInformation
Contents:
BasicOperations
AdvancedGuide
CameraBasics
SmartAuto
Mode
OtherShooting
Modes
PMode
Wi-FiFunctions
SettingMenu
Accessories
Appendix
Index
BasicGuide
PlaybackMode
Still Images Movies
Trying the Camera Out
Follow these instructions to turn the camera on, shoot still images or
movies, and then view them.
Shooting (Smart Auto)
For fully automatic selection of the optimal settings for specic scenes,
simply let the camera determine the subject and shooting conditions.
1 Turnthecameraon.
Press the power button.
The startup screen is displayed.
2 Enter[A]mode.
Set the mode switch to [A].
Aim the camera at the subject. The
camera will make a slight clicking noise
as it determines the scene.
Icons representing the scene and image
stabilization mode are displayed in the
upper right of the screen.
Frames displayed around any detected
subjects indicate that they are in focus.
3 Composetheshot.
To zoom in and enlarge the subject, move
the zoom lever toward < > (telephoto), i
and to zoom away from the subject, move
it toward < > (wide angle).j
4 Shoot.
ShootingStillImages
Focus.
Press the shutter button lightly, halfway
down. The camera beeps twice after
focusing, and AF frames are displayed to
indicate image areas in focus.
Shoot.
Press the shutter button all the way
down.
As the camera shoots, a shutter sound
is played, and in low-light conditions, the
ash res automatically.
Keep the camera still until the shutter
sound ends.
Your shot is only displayed until the
camera is ready to shoot again.
COPY
16
1
2
3
4
5
6
7
8
9
Cover
PreliminaryNotesand
LegalInformation
Contents:
BasicOperations
AdvancedGuide
CameraBasics
SmartAuto
Mode
OtherShooting
Modes
PMode
Wi-FiFunctions
SettingMenu
Accessories
Appendix
Index
BasicGuide
PlaybackMode
ShootingMovies
Startshooting.
Press the movie button. The camera
beeps once as recording begins, and
[ Rec] is displayed with the elapsed time.
Black bars displayed on the top and
bottom edges of the screen indicate
image areas not recorded.
Frames displayed around any detected
faces indicate that they are in focus.
Once recording begins, take your nger
off the movie button.
Finishshooting.
Press the movie button again to stop
shooting. The camera beeps twice as
recording stops.
Elapsed Time
Viewing
After shooting images or movies, you can view them on the screen as
follows.
1 EnterPlaybackmode.
Press the < > button.1
Your last shot is displayed.
2 Browsethroughyourimages.
To view the previous image, press the
< > button. To view the next image, q
press the < > button.r
To access Scroll Display mode, press and
hold the < >< > buttons for at least one q r
second. In this mode, press the < >< > q r
buttons to browse through images.
To return to single-image display, press
the < > button.m
COPY
17
1
2
3
4
5
6
7
8
9
Cover
PreliminaryNotesand
LegalInformation
Contents:
BasicOperations
AdvancedGuide
CameraBasics
SmartAuto
Mode
OtherShooting
Modes
PMode
Wi-FiFunctions
SettingMenu
Accessories
Appendix
Index
BasicGuide
PlaybackMode
Movies are identied by a [ ] icon. To
play movies, go to step 3.
3 Playmovies.
Press the < > button, press the m
< >< > buttons to choose [o p ], and
then press the < > button again.m
Playback now begins, and after the movie
is nished, [ ] is displayed.
To adjust the volume, press the <o p>< >
buttons.
• To switch to Shooting mode from Playback mode, press the shutter button
halfway.
ErasingtheImages
You can choose and erase unneeded images one by one. Be careful when
erasing images, because they cannot be recovered.
1 Chooseanimagetoerase.
Press the < >< > buttons to choose an q r
image.
2 Erasetheimage.
Press the < > button, press the m
< >< > buttons to choose [ ], and o p a
then press the < > button again.m
After [Erase?] is displayed, press the
< >< > buttons to choose [Erase], and q r
then press the < > button.m
The current image is now erased.
To cancel erasure, press the < >< > q r
buttons to choose [Cancel], and then
press the < > button.m
• You can also erase all images at once (=
75).
COPY
18
1
2
3
4
5
6
7
8
9
Cover
PreliminaryNotesand
LegalInformation
Contents:
BasicOperations
AdvancedGuide
CameraBasics
SmartAuto
Mode
OtherShooting
Modes
PMode
Wi-FiFunctions
SettingMenu
Accessories
Appendix
Index
BasicGuide
PlaybackMode
Included Software, PDF Manuals
The software and PDF manuals on the included DIGITAL CAMERA Solution
Disk (CD-ROM) (=
2) are introduced below, with instructions for
installation, and saving images to a computer.
Software
After installing the software on the CD-ROM, you can do the following
things on your computer.
CameraWindow
Import images and change camera settings
ImageBrowserEX
Manage images: view, search, and organize
Print and edit images
AutoUpdateFunction
Using the included software, you can update to the latest version, and
download new functions via the Internet (some software excluded). Be sure
to install the software on a computer with an Internet connection so you can
use this function.
• Internet access is required to use this function, and any ISP account
charges and access fees must be paid separately.
PDF Manuals
CameraUserGuide
Refer to this guide for a more in-depth understanding of camera
operation.
SoftwareGuide
Refer to this guide when using the included software. The guide can be
accessed from the help system of included software (some software
excluded).
COPY
19
1
2
3
4
5
6
7
8
9
Cover
PreliminaryNotesand
LegalInformation
Contents:
BasicOperations
AdvancedGuide
CameraBasics
SmartAuto
Mode
OtherShooting
Modes
PMode
Wi-FiFunctions
SettingMenu
Accessories
Appendix
Index
BasicGuide
PlaybackMode
System Requirements
The included software can be used on the following computers. Adobe
Reader is required to view the PDF manuals.
Operating
System* 1
Windows Macintosh
Windows 8
Windows 7 SP1
Windows Vista SP2
Windows XP SP3
Mac OS X 10.6
Mac OS X 10.7
Mac OS X 10.8*2
Computer Computers running one of the above operating systems
(preinstalled), with an included USB port and Internet connection
Processor
Still images: 1.6 GHz or higher,
Movies: Core 2 Duo 1.66 GHz
or higher
Mac OS X 10.7 – 10.8: Core 2
Duo or higher,
Mac OS X 10.6: Core Duo
1.83 GHz or higher
RAM
Still images
Windows 8 (64 bit), Windows 7
(64 bit): 2 GB or more
Windows 8 (32 bit), Windows 7
(32 bit), Windows Vista: 1 GB
or more
Windows XP: 512 MB or more
Movies
1 GB or more
Mac OS X 10.7 – 10.8: 2 GB
or more,
Mac OS X 10.6: 1 GB or more
Interfaces USB and Wi-Fi
FreeHardDisk
Space 440 MB or more*3550 MB or more*3
Display 1024 x 768 resolution or higher
*1 Wi-Fi image transfer to a computer requires Windows 8, Windows 7 SP1, Mac OS X
10.6.8, Mac OS X 10.7, or Mac OS X 10.8.2 or later.
*2 Information on computer models compatible with Mac OS X 10.8 is available on the
Apple website.
*3 Includes Silverlight 5.1 (max. 100 MB). Additionally, in Windows XP, Microsoft .NET
Framework 3.0 or later (max. 500 MB) must be installed. Installation may take some
time, depending on computer performance.
• Check the Canon website for the latest system requirements, including
supported OS versions.
Installing the Software
Windows 7 and Mac OS X 10.6 are used here for the sake of illustration.
Using the software auto update function, you can update to the latest
version and download new functions via the Internet (some software
excluded), so be sure to install the software on a computer with an Internet
connection.
Whatyouwillneed:
Computer
Interface cable (=
2)
Included CD-ROM (DIGITAL CAMERA Solution Disk) (=
2)
1 InserttheCD-ROMinthe
computer’sCD-ROMdrive.
Insert the included CD-ROM (DIGITAL
CAMERA Solution Disk) (=
2) in the
computer’s CD-ROM drive.
On a Macintosh computer, after inserting
the disc, double-click the desktop disc
icon to open it, and then double-click the
[ ] icon displayed.
COPY
20
1
2
3
4
5
6
7
8
9
Cover
PreliminaryNotesand
LegalInformation
Contents:
BasicOperations
AdvancedGuide
CameraBasics
SmartAuto
Mode
OtherShooting
Modes
PMode
Wi-FiFunctions
SettingMenu
Accessories
Appendix
Index
BasicGuide
PlaybackMode
2 Begintheinstallation.
Click [Easy Installation] and follow the
on-screen instructions to complete the
installation process.
3 Whenamessageisdisplayed
promptingyoutoconnect
thecamera,connectittoa
computer.
With the camera turned off, open the
cover ( ). With the smaller plug of the
included interface cable (=
2) in the
orientation shown, insert the plug fully
into the camera terminal ( ).
Insert the larger plug of the interface
cable in the computer’s USB port. For
details about USB connections on the
computer, refer to the computer user
manual.
4 Installtheles.
Turn the camera on, and follow the
on-screen instructions to complete the
installation process.
The software will connect to the Internet
to update to the latest version and
download new functions. Installation may
take some time, depending on computer
performance and the Internet connection.
Click [Finish] or [Restart] on the screen
after installation and remove the CD-
ROM when the desktop is displayed.
Turn the camera off and disconnect the
cable.
• When not connected to the Internet, there are the following limitations.
- The screen in step 3 will not be displayed.
- Some functions may not be installed.
• The rst time you connect the camera to the computer, drivers will be installed,
so it may take a few minutes until camera images are accessible.
• If you have several cameras that were bundled with ImageBrowser EX on the
included CD-ROMs, be sure to use each camera with their included CD-ROM
and follow the on-screen installation instructions for each. Doing so will ensure
that each camera will receive the correct updates and new functions via the
auto update function.
COPY
21
1
2
3
4
5
6
7
8
9
Cover
PreliminaryNotesand
LegalInformation
Contents:
BasicOperations
AdvancedGuide
CameraBasics
SmartAuto
Mode
OtherShooting
Modes
PMode
Wi-FiFunctions
SettingMenu
Accessories
Appendix
Index
BasicGuide
PlaybackMode
Saving Images to a Computer
Windows 7 and Mac OS X 10.6 are used here for the sake of illustration.
1 Connectthecameratothe
computer.
Follow step 3 in “Installing the Software”
(=
20) to connect the camera to a
computer.
2 Turnthecameraontoaccess
CameraWindow.
Press the <
1
> button to turn the camera on.
On a Macintosh computer, CameraWindow is
displayed when a connection is established
between the camera and computer.
For Windows, follow the steps introduced
below.
In the screen that displays, click the [ ]
link to modify the program.
Choose [Downloads Images From Canon
Camera using Canon CameraWindow]
and then click [OK].
Double click [ ].
3 Savetheimagestothe
computer.
Click [Import Images from Camera], and
then click [Import Untransferred Images].
Images are now saved to the Pictures
folder on the computer, in separate
folders named by date.
After images are saved, close
CameraWindow, press the < > button 1
to turn the camera off, and unplug the
cable.
For instructions on viewing images on
a computer, refer to the Software Guide
(=
18).
• In Windows 7, if the screen in step 2 is not displayed, click the [ ] icon in the
taskbar.
• To start CameraWindow in Windows Vista or XP, click [Downloads Images
From Canon Camera using Canon CameraWindow] on the screen displayed
when you turn the camera on in step 2. If CameraWindow is not displayed,
click the [Start] menu and choose [All Programs] ► [Canon Utilities] ►
[CameraWindow] ► [CameraWindow].
• On a Macintosh computer, if CameraWindow is not displayed after step 2, click
the [CameraWindow] icon in the Dock (the bar at the bottom of the desktop).
CameraWindow
COPY
22
1
2
3
4
5
6
7
8
9
Cover
PreliminaryNotesand
LegalInformation
Contents:
BasicOperations
AdvancedGuide
CameraBasics
SmartAuto
Mode
OtherShooting
Modes
PMode
Wi-FiFunctions
SettingMenu
Accessories
Appendix
Index
BasicGuide
PlaybackMode
• Although you can save images to a computer simply by connecting your
camera to the computer without using the software, the following limitations
apply.
- It may take a few minutes after you connect the camera to the computer until
camera images are accessible.
- Images shot in vertical orientation may be saved in horizontal orientation.
- Image protection settings may be cleared from images saved to a computer.
- Some problems may occur when saving images or image information,
depending on the operating system version, the software in use, or image
le sizes.
- Some functions provided by the software may not be available, such as
movie editing.
Using the PDF Manuals
CameraUserGuide
Access this guide by double-clicking the desktop shortcut icon.
SoftwareGuide
The guide can be accessed from the help system of included software
(some software excluded).
• It may not be possible to install the PDF manuals on computers that do not
meet the system requirements (=
19). However, you can view the manuals
on a computer that supports Adobe Reader by copying the PDF les in the
Readme folder on the CD-ROM directly to a convenient location on the
computer.
System Map
Wrist Strap
WS-800
Battery Pack
NB-11L*1
Battery Charger
CB-2LF/
CB-2LFE*
1
DIGITAL
CAMERA
Solution Disk
Interface Cable IFC-400PCU*1
Memory Card Card Reader Windows/
Macintosh
Computer
TV/Video
System
AC Adapter Kit
ACK-DC90
High-Power Flash
HF-DC2*
2
Included
Accessories
Power
FlashUnit Canon-brandPictBridge-
CompatiblePrinters
Cable
AV Cable AVC-DC400
*1 Also available for purchase separately.
*2 High-Power Flash HF-DC1 also supported.
COPY
23
1
2
3
4
5
6
7
8
9
Cover
PreliminaryNotesand
LegalInformation
Contents:
BasicOperations
AdvancedGuide
CameraBasics
SmartAuto
Mode
OtherShooting
Modes
PMode
Wi-FiFunctions
SettingMenu
Accessories
Appendix
Index
BasicGuide
PlaybackMode
UseofgenuineCanonaccessoriesisrecommended.
This product is designed to achieve excellent performance when used with genuine
Canon accessories.
Canon shall not be liable for any damage to this product and/or accidents such as re,
etc., caused by the malfunction of non-genuine Canon accessories (e.g., a leakage
and/or explosion of a battery pack). Please note that this warranty does not apply to
repairs arising out of the malfunction of non-genuine Canon accessories, although you
may request such repairs on a chargeable basis.
Note that availability varies by area, and some accessories may no longer be
available.
COPY
24
1
2
3
4
5
6
7
8
9
Cover
PreliminaryNotesand
LegalInformation
Contents:
BasicOperations
AdvancedGuide
CameraBasics
SmartAuto
Mode
OtherShooting
Modes
PMode
Wi-FiFunctions
SettingMenu
Accessories
Appendix
Index
BasicGuide
PlaybackMode
Cover
1
CameraBasics
AdvancedGuide
Camera Basics
Practical guide that introduces other camera basics and
describes shooting and playback options
1
4
On/Off........................................25
ShutterButton..........................26
ShootingDisplayOptions.......26
FUNC.Menu..............................27
MENUMenu..............................28
IndicatorDisplay......................29
Clock.........................................29
Advanced Guide
COPY
25
1
2
3
4
5
6
7
8
9
Cover
PreliminaryNotesand
LegalInformation
Contents:
BasicOperations
AdvancedGuide
CameraBasics
SmartAuto
Mode
OtherShooting
Modes
PMode
Wi-FiFunctions
SettingMenu
Accessories
Appendix
Index
BasicGuide
PlaybackMode
Cover
1
CameraBasics
AdvancedGuide
On/Off
ShootingMode
Press the power button to turn the
camera on and prepare for shooting.
To turn the camera off, press the power
button again.
PlaybackMode
Press the < > button to turn the camera 1
on and view your shots.
To turn the camera off, press the < > 1
button again.
• To switch to Playback mode from Shooting mode, press the < > button.1
• To switch to Shooting mode from Playback mode, press the shutter button
halfway (=
26).
• The lens will be retracted after about one minute once the camera is in
Playback mode. You can turn the camera off when the lens is retracted by
pressing the < > button.1
Power-Saving Features (Auto Power Down)
As a way to conserve battery power, the camera automatically deactivates
the screen (Display Off) and then turns itself off after a specic period of
inactivity.
PowerSavinginShootingMode
The screen is automatically deactivated after about one minute of inactivity.
In about two more minutes, the lens is retracted and the camera turns itself
off. To activate the screen and prepare for shooting when the screen is off
but the lens is still out, press the shutter button halfway (=
26).
PowerSavinginPlaybackMode
The camera turns itself off automatically after about ve minutes of
inactivity.
• You can deactivate Auto Power Down and adjust the timing of Display Off, if
you prefer (=
109).
• Power saving is not active while the camera is connected to a computer via
the interface cable (=
21), or when connected to other devices via Wi-Fi
(=
83).
COPY
26
1
2
3
4
5
6
7
8
9
Cover
PreliminaryNotesand
LegalInformation
Contents:
BasicOperations
AdvancedGuide
CameraBasics
SmartAuto
Mode
OtherShooting
Modes
PMode
Wi-FiFunctions
SettingMenu
Accessories
Appendix
Index
BasicGuide
PlaybackMode
Cover
1
CameraBasics
AdvancedGuide
Shutter Button
To ensure your shots are in focus, always begin by holding the shutter
button halfway down, and once the subject is in focus, press the button all
the way down to shoot.
In this manual, shutter button operations are described as pressing the
button or .halfway all the way down
1 Presshalfway.(Presslightlyto
focus.)
Press the shutter button halfway. The
camera beeps twice, and AF frames are
displayed around image areas in focus.
2 Pressallthewaydown.(From
thehalfwayposition,pressfully
toshoot.)
The camera shoots, as a shutter sound
is played.
Keep the camera still until the shutter
sound ends.
• Images may be out of focus if you shoot without initially pressing the
shutter button halfway.
• Length of shutter sound playback varies depending on the time
required for the shot. It may take longer in some shooting scenes,
and images will be blurry if you move the camera (or the subject
moves) before the shutter sound ends.
Shooting Display Options
Press the < > button to view other information on the screen, or to hide p
the information. For details on the information displayed, see On-Screen
Information (=
131).
Information is displayed No information is
displayed
• Screen brightness is automatically increased by the night display function
when you are shooting under low light, making it easier to check how shots
are composed. However, on-screen image brightness may not match the
brightness of your shots. Note that any on-screen image distortion or jerky
subject motion will not affect recorded images.
• For playback display options, see Switching Display Modes (=
68).
COPY
27
1
2
3
4
5
6
7
8
9
Cover
PreliminaryNotesand
LegalInformation
Contents:
BasicOperations
AdvancedGuide
CameraBasics
SmartAuto
Mode
OtherShooting
Modes
PMode
Wi-FiFunctions
SettingMenu
Accessories
Appendix
Index
BasicGuide
PlaybackMode
Cover
1
CameraBasics
AdvancedGuide
FUNC. Menu
Congure commonly used functions through the FUNC. menu as follows.
Note that menu items and options vary depending on the shooting mode
(=
135 – 136) or playback mode (=
139).
1 AccesstheFUNC.menu.
Press the < > button.m
2 Chooseamenuitem.
Press the < >< > buttons to choose a o p
menu item, and then press the < > or m
< > button.r
In some menu items, functions can be
specied simply by pressing the <m>
or < > button, or another screen is r
displayed for conguring the function.
3 Chooseanoption.
Press the < >< > buttons to choose o p
an option.
Options labeled with a [ ] icon can be
congured by pressing the <n>
button.
To return to the menu items, press the
< > button.q
Options
Menu Items
4 Finishthesetupprocess.
Press the < > button.m
The screen before you pressed the
< > button in step 1 is displayed again, m
showing the option you congured.
• To undo any accidental setting changes, you can restore the camera’s default
settings (=
112).
COPY
28
1
2
3
4
5
6
7
8
9
Cover
PreliminaryNotesand
LegalInformation
Contents:
BasicOperations
AdvancedGuide
CameraBasics
SmartAuto
Mode
OtherShooting
Modes
PMode
Wi-FiFunctions
SettingMenu
Accessories
Appendix
Index
BasicGuide
PlaybackMode
Cover
1
CameraBasics
AdvancedGuide
MENU Menu
Congure a variety of camera functions through other menus as follows.
Menu items are grouped by purpose on tabs, such as shooting [ ], 4
playback [ ], and so on. Note that available settings vary depending on 1
the selected shooting or playback mode (=
137 – 139).
1 Accessthemenu.
Press the < > button.n
2 Chooseatab.
Move the zoom lever to choose a tab.
After you have pressed the < >< > o p
buttons to choose a tab initially, you can
switch between tabs by pressing the
< >< > buttons.q r
3 Chooseasetting.
Press the < >< > buttons to choose a o p
setting.
To choose settings with options not
shown, rst press the <m r> or < >
button to switch screens, and then press
the < >< > buttons to select the o p
setting.
To return to the previous screen, press
the < > button.n
4 Chooseanoption.
Press the < >< > buttons to choose an q r
option.
5 Finishthesetupprocess.
Press the < > button to return to the n
screen displayed before you pressed the
< > button in step 1.n
• To undo any accidental setting changes, you can restore the camera’s default
settings (=
112).
COPY
29
1
2
3
4
5
6
7
8
9
Cover
PreliminaryNotesand
LegalInformation
Contents:
BasicOperations
AdvancedGuide
CameraBasics
SmartAuto
Mode
OtherShooting
Modes
PMode
Wi-FiFunctions
SettingMenu
Accessories
Appendix
Index
BasicGuide
PlaybackMode
Cover
1
CameraBasics
AdvancedGuide
Indicator Display
The indicator on the back of the camera (=
3) lights up or blinks
depending on the camera status.
Color Indicator
Status CameraStatus
Green
On Connected to a computer (=
21), or display off
(=
25, 108, 109)
Blinking
Starting up, recording/reading/transmitting images,
shooting long exposures (=
52), or connected/
transmitting via Wi-Fi
• When the indicator blinks green, never turn the camera off, open the
memory card/battery cover, or shake or jolt the camera, which may
corrupt images or damage the camera or memory card.
Clock
You can check the current time.
Press and hold the < > button.m
The current time appears.
If you hold the camera vertically while
using the clock function, it will switch
to vertical display. Press the < >< > q r
buttons to change the display color.
Press the < > button again to cancel m
the clock display.
• When the camera is off, press and hold the < > button, then press the power m
button to display the clock.
COPY
30
1
2
3
4
5
6
7
8
9
Cover
PreliminaryNotesand
LegalInformation
Contents:
BasicOperations
AdvancedGuide
CameraBasics
SmartAuto
Mode
OtherShooting
Modes
PMode
Wi-FiFunctions
SettingMenu
Accessories
Appendix
Index
BasicGuide
PlaybackMode
Cover
AdvancedGuide
2
SmartAuto
Mode
Smart Auto Mode
Convenient mode for easy shots with greater control
over shooting
2
4
Shooting(SmartAuto).............31
Common,Convenient
Features...................................35
ImageCustomization
Features...................................38
HelpfulShootingFeatures......40
CustomizingCamera
Operation.................................42
COPY
31
1
2
3
4
5
6
7
8
9
Cover
PreliminaryNotesand
LegalInformation
Contents:
BasicOperations
AdvancedGuide
CameraBasics
SmartAuto
Mode
OtherShooting
Modes
PMode
Wi-FiFunctions
SettingMenu
Accessories
Appendix
Index
BasicGuide
PlaybackMode
Cover
AdvancedGuide
2
SmartAuto
Mode
Still Images Movies
Shooting (Smart Auto)
For fully automatic selection at optimal settings for specic scenes, simply
let the camera determine the subject and shooting conditions.
1 Turnthecameraon.
Press the power button.
The startup screen is displayed.
2 Enter[A]mode.
Set the mode switch to [A].
Aim the camera at the subject. The
camera will make a slight clicking noise
as it determines the scene.
Icons representing the scene and image
stabilization mode are displayed in the
upper right of the screen (=
33, 34).
Frames displayed around any detected
subjects indicate that they are in focus.
3 Composetheshot.
To zoom in and enlarge the subject, move
the zoom lever toward < > (telephoto), i
and to zoom away from the subject, move
it toward < > (wide angle). (A zoom bar j
showing the zoom position is displayed.)
Zoom Bar
4 Shoot.
ShootingStillImages
Focus.
Press the shutter button halfway. The
camera beeps twice after focusing, and
AF frames are displayed to indicate
image areas in focus.
Several AF frames are displayed when
multiple areas are in focus.
Shoot.
Press the shutter button all the way
down.
As the camera shoots, a shutter sound
is played, and in low-light conditions, the
ash res automatically.
Keep the camera still until the shutter
sound ends.
Your shot is only displayed until the
camera is ready to shoot again.
COPY
32
1
2
3
4
5
6
7
8
9
Cover
PreliminaryNotesand
LegalInformation
Contents:
BasicOperations
AdvancedGuide
CameraBasics
SmartAuto
Mode
OtherShooting
Modes
PMode
Wi-FiFunctions
SettingMenu
Accessories
Appendix
Index
BasicGuide
PlaybackMode
Cover
AdvancedGuide
2
SmartAuto
Mode
ShootingMovies
Startshooting.
Press the movie button. The camera
beeps once as recording begins, and
[ Rec] is displayed with the elapsed
time.
Black bars displayed on the top and
bottom edges of the screen indicate
image areas not recorded.
Frames displayed around any detected
faces indicate that they are in focus.
Once recording begins, take your nger
off the movie button.
Resizethesubjectand
recomposetheshotasneeded.
To resize the subject, repeat the
operations in step 3 (=
31). However,
note that the sound of camera operations
will be recorded.
When you recompose shots, the
focus, brightness, and colors will be
automatically adjusted.
Finishshooting.
Press the movie button again to stop
shooting. The camera beeps twice as
recording stops.
Recording will stop automatically when
the memory card becomes full.
Elapsed Time
StillImages/Movies
• If the camera is turned on while the < > button is held down, the p
camera will no longer sound. To activate sounds again, press the
< > button and choose [Mute] on the [ ] tab, and then press n 3
the < >< > buttons to choose [Off].q r
StillImages
• A ashing [ ] icon warns that images are more likely to be blurred
by camera shake. In this case, mount the camera on a tripod or take
other measures to keep it still.
• If your shots are dark despite the ash ring, move closer to the
subject. For details on the ash range, see Flash Range (=
142).
• The subject may be too close if the camera only beeps once when
you press the shutter button halfway. For details on the focusing
range (shooting range), see Shooting Range (=
142).
• To reduce red-eye and to assist in focusing, the lamp may be
activated when shooting in low-light conditions.
• A blinking [ ] icon displayed when you attempt to shoot indicates h
that shooting is not possible until the ash has nished recharging.
Shooting can resume as soon as the ash is ready, so either press
the shutter button all the way down and wait, or release it and press
it again.
• You can change how long images are displayed after shots (=
43).
COPY
33
1
2
3
4
5
6
7
8
9
Cover
PreliminaryNotesand
LegalInformation
Contents:
BasicOperations
AdvancedGuide
CameraBasics
SmartAuto
Mode
OtherShooting
Modes
PMode
Wi-FiFunctions
SettingMenu
Accessories
Appendix
Index
BasicGuide
PlaybackMode
Cover
AdvancedGuide
2
SmartAuto
Mode
Movies
• The camera may become warm when shooting movies repeatedly
over an extended period. This does not indicate damage.
• Keep your ngers away from the
microphone while shooting movies.
Blocking the microphone may prevent
audio from being recorded or may
cause the recording to sound mufed.
• Avoid touching camera controls other than the movie button when
shooting movies, because sounds made by the camera will be
recorded.
• Audio recording is monaural.
Microphone
Still Images Movies
Scene Icons
In [ ] mode, shooting scenes determined by the camera are indicated A
by the icon displayed, and corresponding settings are automatically
selected for optimal focusing, subject brightness, and color.
Subject
Background
People OtherSubjects
Icon
Background
Color
In
Motion*1
Shadows
onFace*
1
In
Motion*1
AtClose
Range
Bright
Gray
Backlit –
WithBlue
Sky Light Blue
Backlit –
Sunsets – – Orange
Spotlights
Dark Blue
Dark
Tripod
Used *2–*2–
*1 Not displayed for movies.
*2 Displayed in dark scenes when the camera is held still, as when mounted on a tripod.
• Try shooting in [ ] mode (G=
54) if the scene icon does not match
actual shooting conditions, or if it is not possible to shoot with your
expected effect, color, or brightness.
COPY
34
1
2
3
4
5
6
7
8
9
Cover
PreliminaryNotesand
LegalInformation
Contents:
BasicOperations
AdvancedGuide
CameraBasics
SmartAuto
Mode
OtherShooting
Modes
PMode
Wi-FiFunctions
SettingMenu
Accessories
Appendix
Index
BasicGuide
PlaybackMode
Cover
AdvancedGuide
2
SmartAuto
Mode
Still Images Movies
Image Stabilization Icons
Optimal image stabilization for the shooting conditions is automatically
applied (Intelligent IS). Additionally, the following icons are displayed in
[A] mode.
Image stabilization for still
images
Image stabilization for movies,
reducing strong camera shake,
as when shooting while walking
(Dynamic IS)
Image stabilization for still
images, when panning*
Image stabilization for slow
camera shake, such as when
shooting movies at telephoto
(Powered IS)
Image stabilization for macro
shots (Hybrid IS)
No image stabilization, because
the camera is mounted on
a tripod or held still by other
means
* Displayed when you pan, following moving subjects with the camera. When you follow
subjects moving horizontally, image stabilization only counteracts vertical camera
shake, and horizontal stabilization stops. Similarly, when you follow subjects moving
vertically, image stabilization only counteracts horizontal camera shake.
• To cancel image stabilization, set [IS Mode] to [Off] (=
65). In this case, an
IS icon is not displayed.
Still Images Movies
On-Screen Frames
A variety of frames are displayed once the camera detects subjects you are
aiming the camera at.
• A white frame is displayed around the subject (or person’s face)
determined by the camera to be the main subject, and gray frames are
displayed around other detected faces. Frames follow moving subjects
within a certain range to keep them in focus.
However, if the camera detects subject movement, only the white frame
will remain on the screen.
• When you are pressing the shutter button halfway and the camera
detects subject movement, a blue frame is displayed, and the focus and
image brightness are constantly adjusted (Servo AF).
• Try shooting in [ ] mode (G=
54) if no frames are displayed, if
frames are not displayed around desired subjects, or if frames are
displayed on the background or similar areas.
COPY
35
1
2
3
4
5
6
7
8
9
Cover
PreliminaryNotesand
LegalInformation
Contents:
BasicOperations
AdvancedGuide
CameraBasics
SmartAuto
Mode
OtherShooting
Modes
PMode
Wi-FiFunctions
SettingMenu
Accessories
Appendix
Index
BasicGuide
PlaybackMode
Cover
AdvancedGuide
2
SmartAuto
Mode
Common, Convenient Features
Still Images Movies
Zooming In Closer on Subjects (Digital Zoom)
When distant subjects are too far away to enlarge using the optical zoom,
use digital zoom for up to about 32x enlargement.
1
Movethezoomlevertoward
<i>.
Hold the lever until zooming stops.
Zooming stops at the largest possible zoom
factor (before the image becomes noticeably
grainy), which is then indicated on the screen.
2 Movethezoomlevertoward
<i>again.
The camera zooms in even closer on the
subject.
• Moving the zoom lever will display the zoom bar (which indicates
the zoom position). The color of the zoom bar will change depending
on the zoom range.
- White range: optical zoom range where the image will not appear grainy.
- Yellow range: digital zoom range where the image is not noticeably
grainy (ZoomPlus).
- Blue range: digital zoom range where the image will appear grainy.
Because the blue range will not be available at some resolution
settings (=
39), the maximum zoom factor can be achieved by
following step 1.
Zoom Factor
• Focal length when optical and digital zoom are combined is as follows (35mm
lm equivalent).
28 – 896 mm (28 – 224 mm with optical zoom alone)
• To deactivate digital zoom, press the < > button, choose [Digital Zoom] n
on the [ ] tab, and then choose [Off].4
Still Images Movies
Using the Self-Timer
With the self-timer, you can include yourself in group photos or other timed
shots. The camera will shoot about 10 seconds after you press the shutter
button.
1 Congurethesetting.
Press the < > button, choose [ ] m
in the menu, and then choose the [ ] ]
option (=
27).
Once the setting is complete, [ ] is ]
displayed.
2 Shoot.
For Still Images: Press the shutter button
halfway to focus on the subject, and then
press it all the way down.
For Movies: Press the movie button.
COPY
36
1
2
3
4
5
6
7
8
9
Cover
PreliminaryNotesand
LegalInformation
Contents:
BasicOperations
AdvancedGuide
CameraBasics
SmartAuto
Mode
OtherShooting
Modes
PMode
Wi-FiFunctions
SettingMenu
Accessories
Appendix
Index
BasicGuide
PlaybackMode
Cover
AdvancedGuide
2
SmartAuto
Mode
Once you start the self-timer, the lamp
will blink and the camera will play a self-
timer sound.
Two seconds before the shot, the blinking
and sound will speed up. (The lamp will
remain lit in case the ash res.)
To cancel shooting after you have
triggered the self-timer, press the
< > button.n
To restore the original setting, choose
[ ] in step 1.
Still Images Movies
UsingtheSelf-TimertoAvoidCameraShake
This option delays shutter release until about two seconds after you have
pressed the shutter button. If the camera is unsteady while you are pressing
the shutter button, it will not affect your shot.
Congurethesetting.
Follow step 1 in “Using the Self-Timer”
(=
35) and choose [ ].[
Once the setting is complete, [ ] is [
displayed.
Follow step 2 in “Using the Self-Timer”
(=
35) to shoot.
Still Images Movies
CustomizingtheSelf-Timer
You can specify the delay (0 – 30 seconds) and number of shots (1 – 10).
1 Choose[ ].$
Following step 1 in “Using the Self-Timer”
(=
35), choose [ ] and press the $
< > button.n
2 Congurethesetting.
Press the < >< > buttons to choose o p
[Delay] or [Shots].
Press the < >< > buttons to choose a q r
value, and then press the < > button.m
Once the setting is complete, [ ] is $
displayed.
Follow step 2 in “Using the Self-Timer”
(=
35) to shoot.
• For movies shot using the self-timer, [Delay] represents the delay
before recording begins, but the [Shots] setting has no effect.
• When you specify multiple shots, image brightness and white balance are
determined by the rst shot. More time is required between shots when the
ash res or when you have specied to take many shots. Shooting will stop
automatically when the memory card becomes full.
• When a delay longer than two seconds is specied, two seconds before the
shot, the lamp blinking and self-timer sound will speed up. (The lamp will
remain lit in case the ash res.)
COPY
37
1
2
3
4
5
6
7
8
9
Cover
PreliminaryNotesand
LegalInformation
Contents:
BasicOperations
AdvancedGuide
CameraBasics
SmartAuto
Mode
OtherShooting
Modes
PMode
Wi-FiFunctions
SettingMenu
Accessories
Appendix
Index
BasicGuide
PlaybackMode
Cover
AdvancedGuide
2
SmartAuto
Mode
Still Images
Deactivating the Flash
Prepare the camera for shooting without the ash as follows.
Congurethesetting.
Press the < > button, press the < >< > r q r
buttons to choose [ ], and then press !
the < > button.m
Once the setting is complete, [ ] is !
displayed.
To restore the original setting, repeat this
process but choose [ ].
• If a ashing [ ] icon is displayed when you press the shutter button
halfway in low-light conditions, mount the camera on a tripod or take
other measures to keep it still.
Still Images
Adding a Date Stamp
The camera can add the shooting date to images, in the lower-right corner.
However, note that date stamps cannot be edited or removed, so conrm
beforehand that the date and time are correct (=
13).
1 Congurethesetting.
Press the < > button, choose n
[Date Stamp ] on the [ ] tab, and 4
then choose the desired option (=
28).
Once the setting is complete, [ ] is
displayed.
2 Shoot.
As you take shots, the camera adds the
shooting date or time to the lower-right
corner of images.
To restore the original setting, choose
[Off] in step 1.
• Date stamps cannot be edited or removed.
COPY
39
1
2
3
4
5
6
7
8
9
Cover
PreliminaryNotesand
LegalInformation
Contents:
BasicOperations
AdvancedGuide
CameraBasics
SmartAuto
Mode
OtherShooting
Modes
PMode
Wi-FiFunctions
SettingMenu
Accessories
Appendix
Index
BasicGuide
PlaybackMode
Cover
AdvancedGuide
2
SmartAuto
Mode
Still Images
Changing Image Resolution (Size)
Choose from 4 levels of image resolution, as follows. For guidelines on
how many shots at each resolution setting can t on a memory card, see
Number of 4:3 Shots per Memory Card (=
141).
Congurethesetting.
Press the < > button, choose [ ] in m
the menu, and choose the desired option
(=
27).
The option you congured is now
displayed.
To restore the original setting, repeat this
process but choose [ ].
GuidelinesforChoosingResolutionBasedonPaper
Size(for4:3Images)
[ ]: For e-mailing images.
A2 (16.5 x 23.4 in.)
A3 – A5 (11.7 x
16.5 – 5.8 x 8.3 in.)
5 x 7 in.
Postcard
3.5 x 5 in.
Still Images
Red-Eye Correction
Red-eye that occurs in the ash photography can be automatically
corrected as follows.
1 Accessthe[FlashSettings]
screen.
Press the < > button, choose [Flash n
Settings] on the [ ] tab, and then press 4
the < > button (m=
28).
2 Congurethesetting.
Choose [Red-Eye Corr.], and then
choose [On] (=
28).
Once the setting is complete, [ ] is R
displayed.
To restore the original setting, repeat this
process but choose [Off].
• Red-eye correction may be applied to image areas other than eyes (if
the camera misinterprets red eye makeup as red pupils, for example).
• You can also correct existing images (=
81).
• You can also access the screen in step 2 by pressing the < > button and then r
the < > button.n
COPY
40
1
2
3
4
5
6
7
8
9
Cover
PreliminaryNotesand
LegalInformation
Contents:
BasicOperations
AdvancedGuide
CameraBasics
SmartAuto
Mode
OtherShooting
Modes
PMode
Wi-FiFunctions
SettingMenu
Accessories
Appendix
Index
BasicGuide
PlaybackMode
Cover
AdvancedGuide
2
SmartAuto
Mode
Movies
Changing Movie Image Quality
2 image quality settings are available. For guidelines on the maximum
movie length at each level of image quality that will t on a memory card,
see Recording Time per Memory Card (=
142).
Congurethesetting.
Press the < > button, choose [ ] in m
the menu, and choose the desired option
(=
27).
The option you congured is now
displayed.
To restore the original setting, repeat this
process but choose [ ].
Image
Quality Resolution FrameRate Details
1280 x 720 25 fps For shooting in HD
640 x 480 30 fps For shooting in standard
denition
• In [ ] mode, black bars displayed on the top and bottom edges of the screen
indicate image areas not recorded.
Helpful Shooting Features
Still Images Movies
Displaying Grid Lines
Grid lines can be displayed on the screen for vertical and horizontal
reference while shooting.
Congurethesetting.
Press the < > button, choose n
[Grid Lines] on the [ ] tab, and then 4
choose [On] (=
28).
Once the setting is complete, grid lines
are displayed on the screen.
To restore the original setting, repeat this
process but choose [Off].
• Grid lines are not recorded in your shots.
COPY
42
1
2
3
4
5
6
7
8
9
Cover
PreliminaryNotesand
LegalInformation
Contents:
BasicOperations
AdvancedGuide
CameraBasics
SmartAuto
Mode
OtherShooting
Modes
PMode
Wi-FiFunctions
SettingMenu
Accessories
Appendix
Index
BasicGuide
PlaybackMode
Cover
AdvancedGuide
2
SmartAuto
Mode
Customizing Camera Operation
Customize shooting functions on the [ ] tab of the menu as follows.4
For instructions on menu functions, see MENU Menu (=
28).
Still Images
Deactivating the AF Assist Beam
You can deactivate the lamp that normally lights up to help you focus when
you press the shutter button halfway in low-light conditions.
Congurethesetting.
Press the < > button, choose n
[AF-assist Beam] on the [ ] tab, and 4
then choose [Off] (=
28).
To restore the original setting, repeat this
process but choose [On].
Still Images
Deactivating the Red-Eye Reduction Lamp
You can deactivate the red-eye reduction lamp that lights up to reduce red-
eye when the ash is used in low-light shots.
1 Accessthe[FlashSettings]
screen.
Press the < > button, choose n
[Flash Settings] on the [ ] tab, and then 4
press the < > button (m =
28).
2 Congurethesetting.
Choose [Red-Eye Lamp], and then
choose [Off] (=
28).
To restore the original setting, repeat this
process but choose [On].
COPY
43
1
2
3
4
5
6
7
8
9
Cover
PreliminaryNotesand
LegalInformation
Contents:
BasicOperations
AdvancedGuide
CameraBasics
SmartAuto
Mode
OtherShooting
Modes
PMode
Wi-FiFunctions
SettingMenu
Accessories
Appendix
Index
BasicGuide
PlaybackMode
Cover
AdvancedGuide
2
SmartAuto
Mode
Still Images
Changing the Image Display Style After Shots
You can change how long images are displayed and what information is
displayed immediately after shooting.
ChangingtheImageDisplayPeriodAfterShots
1 Accessthe[Reviewimageafter
shooting]screen.
Press the < > button, choose n
[Review image after shooting] on the [ ] 4
tab, and then press the < > button.m
2 Congurethesetting.
Press the < >< > buttons to choose o p
[Display Time]. Press the < >< > q r
buttons to choose the desired option
(=
28).
To restore the original setting, repeat this
process but choose [Quick].
Quick Displays images only until you can shoot again.
2 sec., 4 sec.,
8 sec.
Displays images for the specied time. Even while the shot is displayed,
you can take another shot by pressing the shutter button halfway again.
Hold Displays images until you press the shutter button halfway.
Off No image display after shots.
Still Images
ChangingtheScreenDisplayedAfterShots
1 Set[DisplayTime]to[2sec.],
[4sec.],[8sec.],or[Hold]
(=
43).
2 Congurethesetting.
Press the < >< > buttons to choose o p
[Display Info]. Press the < >< > buttons q r
to choose the desired option (=
28).
To restore the original setting, repeat this
process but choose [Off].
Off Displays only the image.
Detailed Displays shooting details (=
132).
• When [Display Time] is set to [Off] or [Quick] (=
43), [Display Info] is set to
[Off] and cannot be changed.
• By pressing the < > button while an image is displayed after shooting, you p
can switch the display information. Note that the settings of [Display Info] on
the [ ] tab cannot be changed. By pressing the < > button, you can do the 4 m
following operations.
- Protect (=
72)
- Favorites (=
77)
- Erase (=
74)
COPY
44
1
2
3
4
5
6
7
8
9
Cover
PreliminaryNotesand
LegalInformation
Contents:
BasicOperations
AdvancedGuide
CameraBasics
SmartAuto
Mode
OtherShooting
Modes
PMode
Wi-FiFunctions
SettingMenu
Accessories
Appendix
Index
BasicGuide
PlaybackMode
Other Shooting Modes
Shoot more effectively in various scenes, and take shots
enhanced with unique image effects or captured using
special functions
3
4
SpecicScenes........................45
ApplyingSpecialEffects.........46
SpecialModesforOther
Purposes.................................50
COPY
45
1
2
3
4
5
6
7
8
9
Cover
PreliminaryNotesand
LegalInformation
Contents:
BasicOperations
AdvancedGuide
CameraBasics
SmartAuto
Mode
OtherShooting
Modes
PMode
Wi-FiFunctions
SettingMenu
Accessories
Appendix
Index
BasicGuide
PlaybackMode
Specic Scenes
Choose a mode matching the shooting scene, and the camera will
automatically congure the settings for optimal shots.
1 Enter< >mode.4
Set the mode switch to < >.4
2 Chooseashootingmode.
Press the < > button, choose [ ] in the m G
menu, and then choose a shooting mode
(=
27).
3 Shoot.
Still Images Movies
IShootportraits(Portrait)
Take shots of people with a softening
effect.
Still Images
Shootunderlowlight(Low
Light)
Shoot with minimal camera shake and
subject blur even in low-light conditions.
Still Images Movies
PShootwithsnowybackgrounds
(Snow)
Bright, natural-colored shots of people
against snowy backgrounds.
Still Images Movies
tShootreworks(Fireworks)
Vivid shots of reworks.
• In [ ] mode, mount the camera on a tripod or take other measures t
to keep it still and prevent camera shake. Additionally, you should
set [IS Mode] to [Off] when using a tripod or other means to hold the
camera still (=
65).
• [ ] mode resolution is [ ] (2304 x 1728) and cannot be changed.
COPY
46
1
2
3
4
5
6
7
8
9
Cover
PreliminaryNotesand
LegalInformation
Contents:
BasicOperations
AdvancedGuide
CameraBasics
SmartAuto
Mode
OtherShooting
Modes
PMode
Wi-FiFunctions
SettingMenu
Accessories
Appendix
Index
BasicGuide
PlaybackMode
Applying Special Effects
Add a variety of effects to images when shooting.
1 Chooseashootingmode.
Follow steps 1 – 2 in “Specic Scenes”
(=
45) to choose a shooting mode.
2 Shoot.
Still Images Movies
Shootinvividcolors(Super
Vivid)
Shots in rich, vivid colors.
Still Images Movies
Posterizedshots(PosterEffect)
Shots that resemble an old poster or
illustration.
• In [ ] and [ ] modes, try taking some test shots rst, to make sure
you obtain the desired results.
Still Images
Shooting with a Fish-Eye Lens Effect
(Fish-eye Effect)
Shoot with the distorting effect of a sh-eye lens.
1 Choose[ ].
Follow steps 1 – 2 in “Specic Scenes”
(=
45) and choose [ ].
2 Chooseaneffectlevel.
Press the < > button, press the p
< >< > buttons to choose an effect q r
level, and then press the < > button.m
A preview is shown of how your shot will
look with the effect applied.
3 Shoot.
• Try taking some test shots rst, to make sure you obtain the desired
results.
COPY
47
1
2
3
4
5
6
7
8
9
Cover
PreliminaryNotesand
LegalInformation
Contents:
BasicOperations
AdvancedGuide
CameraBasics
SmartAuto
Mode
OtherShooting
Modes
PMode
Wi-FiFunctions
SettingMenu
Accessories
Appendix
Index
BasicGuide
PlaybackMode
Still Images Movies
Shots Resembling Miniature Models
(Miniature Effect)
Creates the effect of a miniature model, by blurring image areas above and
below your selected area.
You can also make movies that look like scenes in miniature models by
choosing the playback speed before the movie is recorded. People and objects
in the scene will move quickly during playback. Note that sound is not recorded.
1 Choose[ ].
Follow steps 1 – 2 in “Specic Scenes”
(=
45) and choose [ ].
A white frame is displayed, indicating the
image area that will not be blurred.
2 Choosetheareatokeepin
focus.
Press the < > button.p
Move the zoom lever to resize the frame,
and press the < >< > buttons to move o p
it.
3 Formovies,choosethemovie
playbackspeed.
Press the <
n
> button, and then press
the <
q
><
r
> buttons to choose the speed.
4 Returntotheshootingscreen
andshoot.
Press the < > button to return to the n
shooting screen, and then shoot.
PlaybackSpeedandEstimatedPlaybackTime
(forOne-MinuteClips)
Speed PlaybackTime
Approx. 12 sec.
Approx. 6 sec.
Approx. 3 sec.
• The zoom is not available when shooting movies. Be sure to set the
zoom before shooting.
• Try taking some test shots rst, to make sure you obtain the desired
results.
• To switch the orientation of the frame to vertical, press the < >< > buttons q r
in step 2. To move the frame, press the < >< > buttons again. To return the q r
frame to horizontal orientation, press the < >< > buttons.o p
• Holding the camera vertically will change the orientation of the frame.
• Movie image quality is [ ] at an aspect ratio of [ ] and [ ] at an aspect
ratio of [ ] (=
38). These quality settings cannot be changed.
COPY
50
1
2
3
4
5
6
7
8
9
Cover
PreliminaryNotesand
LegalInformation
Contents:
BasicOperations
AdvancedGuide
CameraBasics
SmartAuto
Mode
OtherShooting
Modes
PMode
Wi-FiFunctions
SettingMenu
Accessories
Appendix
Index
BasicGuide
PlaybackMode
4 Specifythenewcolor.
Position the center frame over the new
color, and then press the < > button.r
The specied color is recorded.
5 Specifytherangeofcolorsto
replace.
Press the < >< > buttons to adjust the o p
range.
To replace only your specied color,
choose a large negative value. To replace
colors similar to your specied color as
well, choose a large positive value.
Press the < > button to return to the m
shooting screen.
6 Shoot.
• Using the ash in this mode may cause unexpected results.
• In some shooting scenes, images may look grainy and colors may
not look as expected.
Special Modes for Other Purposes
Still Images
Auto Shooting After Face Detection
(Smart Shutter)
AutoShootingAfterSmileDetection
The camera shoots automatically after detecting a smile, even without you
pressing the shutter button.
1 Choose[ ].
Follow steps 1 – 2 in “Specic Scenes”
(=
45) and choose [ ], and then
press the < > button.p
Press the < >< > buttons to choose q r
[], and then press the < > button.m
The camera now enters shooting standby
mode, and [Smile Detection on] is displayed.
2 Aimthecameraataperson.
Each time the camera detects a smile, it
will shoot after the lamp lights up.
To pause smile detection, press the < > q
button. Press the < > button again to q
resume detection.
• Switch to another mode when you nish shooting, or the camera will
continue shooting each time a smile is detected.
• You can also shoot as usual by pressing the shutter button.
• The camera can detect smiles more easily when subjects face the camera and
open their mouth wide enough so that teeth are visible.
COPY
51
1
2
3
4
5
6
7
8
9
Cover
PreliminaryNotesand
LegalInformation
Contents:
BasicOperations
AdvancedGuide
CameraBasics
SmartAuto
Mode
OtherShooting
Modes
PMode
Wi-FiFunctions
SettingMenu
Accessories
Appendix
Index
BasicGuide
PlaybackMode
• To change the number of shots, press the < >< > buttons after choosing o p
[] in step 1. [Blink Detection] (=
41) is only available for the nal shot.
Still Images
UsingtheWinkSelf-Timer
Aim the camera at a person and press the shutter button all the way down.
The camera will shoot about two seconds after a wink is detected.
1 Choose[ ].
Follow steps 1 – 2 in “Specic Scenes”
(=
45) and choose [ ], and then
press the < > button.p
Press the < >< > buttons to choose q r
[], and then press the < > button.m
2 Composetheshotandpress
theshutterbuttonhalfway.
Make sure a green frame is displayed
around the face of the person who will
wink.
3 Presstheshutterbuttonallthe
waydown.
The camera now enters shooting standby
mode, and [Wink to take picture] is
displayed.
The lamp blinks and the self-timer sound
is played.
4 Facethecameraandwink.
The camera will shoot about two seconds
after detecting a wink by the person
whose face is inside the frame.
To cancel shooting after you have
triggered the self-timer, press the
< > button.n
• If the wink is not detected, wink again slowly and deliberately.
• Winking may not be detected if eyes are obscured by hair, a hat, or glasses.
• Closing and opening both eyes at once will also be detected as a wink.
• If winking is not detected, the camera will shoot about 15 seconds later.
• To change the number of shots, press the < >< > buttons after choosing o p
[] in step 1. [Blink Detection] (=
41) is only available for the nal shot.
• If no one is in the shooting area when the shutter button is pressed all the way
down, the camera will shoot after a person enters the shooting area and winks.
Still Images
UsingtheFaceSelf-Timer
The camera will shoot about two seconds after detecting that the face of
another person (such as the photographer) has entered the shooting area
(=
61). This is useful when including yourself in group photos or similar
shots.
1 Choose[ ].
Follow steps 1 – 2 in “Specic Scenes”
(=
45) and choose [ ], and then
press the < > button.p
Press the < >< > buttons to choose q r
[], and then press the < > button.m
COPY
Produkt Specifikationer
Mærke: | Canon |
Kategori: | Kamera |
Model: | PowerShot ELPH 130 IS |
Bredde: | 95.4 mm |
Dybde: | 20.6 mm |
Højde: | 56 mm |
Vægt: | 117 g |
Produktfarve: | Rød |
Batterispænding: | 3.7 V |
Vægt (inkl. batteri): | 133 g |
Skærm diagonal: | 3 " |
Kompatible hukommelseskort: | SD,SDHC,SDXC |
Wi-Fi: | Ja |
Batteriteknologi: | Lithium-Ion (Li-Ion) |
HD-type: | HD |
Relativ luftfugtighed ved drift (H-H): | 10 - 90 % |
Format til analogt signal: | NTSC,PAL |
Understøttede videoformater: | H.264,MOV |
Driftstemperatur (T-T): | 0 - 40 °C |
Skærm: | TFT |
Intern hukommelse: | - MB |
Understøttede billedformater: | 1:1,3:2,4:3,16:9 |
Strømkilde type: | Batteri |
Videooptagelse: | Ja |
Batteritype: | NB-11L |
USB version: | 2.0 |
Indbygget mikrofon: | Ja |
PictBridge: | Ja |
Hvidbalance: | Auto,Cloudy,Custom modes,Daylight,Fluorescent,Fluorescent H,Tungsten |
Scenetilstande: | Fireworks,Portrait,Snow |
Fotoeffekter: | Black&White,Neutral,Positive film,Sepia,Skin tones,Vivid |
Selvudløserens forsinkelse: | 2,10 sek./side |
Optagelsestilstande: | Auto,Manual,Movie |
Kameraafspilning: | Movie,Single image |
Histogram: | Ja |
Skærmopløsning (numerisk): | 461000 pixel |
Synsfelt: | 100 % |
Flashtilstande: | Auto,Flash off,Flash on,Slow synchronization |
Flash rækkevidde (bredt): | 0.5 - 3.5 m |
Flash rækkevidde (tele): | 1.3 - 1.7 m |
Megapixel: | 16 MP |
Kameratype: | Kompakt kamera |
Sensortype: | CCD |
Maksimal billedopløsning: | 4608 x 3072 pixel |
Opløsning på stillbillede(r): | 480 x 480,640 x 360,640 x 424,640 x 480,1200 x 1200,1600 x 1064,1600 x 1200,1920 x 1080,2448 x 2448,3264 x 1832,3264 x 2176,3456 x 3456,4608 x 2592,4608 x 3072,4608 x 3456 |
Billedstabilisator: | Ingen |
Billede sensor størrelse: | 1/2.3 " |
Samlet antal megapixels: | 16.6 MP |
Maksimal videoopløsning: | 1280 x 720 pixel |
Videoopløsninger: | 640 x 480 pixel |
Bevægelse JPEG-billedhastighed: | 30 fps |
Hukommelsesstik: | 1 |
Optisk zoom: | 8 x |
Digital zoom: | 4 x |
Fokus: | TTL |
Normal fokuseringsområde: | 0.01 - ∞, 1.3 - ∞ m |
Lyseksponeringstilstande: | Auto,Manual |
Korrektion af lyseksponering: | ± 2EV (1/3EV step) |
Lysmåling: | Centre-weighted,Evaluative (Multi-pattern),Spot |
Automatisk eksponering (AE) lås: | Ja |
Hurtigste hastighed for kameralukker: | 1/2000 sek./side |
Langsomste hastighed for kameralukker: | 15 sek./side |
Batteri levetid (CIPA-standard): | 190 skud |
Maksimale blænderåbning tal: | 6.9 |
Brændviddeområde: | 5 - 40 mm |
Mindste brændvidde (svarende til 35 mm film): | 28 mm |
Maksimale brændvidde (svarende til 35 mm film): | 224 mm |
ISO-følsomhed: | 100,200,400,800,1600,6400,Auto |
Indbygget flash: | Ja |
Kamerafilsystem: | DPOF 1.1,Exif 2.3 |
Mindste blænderåbnimg tal: | 3.2 |
Normal fokuseringsinterval (tele): | 1.3 - ∞ m |
Normal fokuseringsinterval (bred): | 0.01 - ∞ m |
Kamera lukker type: | Elektronisk |
Flash genopladningstid: | 10 sek./side |
Kombineret zoom: | 32 x |
Har du brug for hjælp?
Hvis du har brug for hjælp til Canon PowerShot ELPH 130 IS stil et spørgsmål nedenfor, og andre brugere vil svare dig
Kamera Canon Manualer
14 December 2024
3 Oktober 2024
3 September 2024
3 September 2024
2 September 2024
28 August 2024
27 August 2024
27 August 2024
27 August 2024
27 August 2024
Kamera Manualer
- Kamera Bosch
- Kamera SilverCrest
- Kamera Acer
- Kamera Ozito
- Kamera Denver
- Kamera Sony
- Kamera Samsung
- Kamera GE
- Kamera Panasonic
- Kamera TP-Link
- Kamera Philips
- Kamera Lenco
- Kamera Gigaset
- Kamera Braun
- Kamera Logitech
- Kamera Epson
- Kamera Daewoo
- Kamera Technaxx
- Kamera HP
- Kamera Sanyo
- Kamera Easypix
- Kamera Grundig
- Kamera D-Link
- Kamera Arlo
- Kamera Bushnell
- Kamera Pyle
- Kamera Fujifilm
- Kamera Nikon
- Kamera Kodak
- Kamera Lenovo
- Kamera Olympus
- Kamera Nedis
- Kamera Zorki
- Kamera Optoma
- Kamera Creative
- Kamera Azden
- Kamera Casio
- Kamera Trevi
- Kamera Trust
- Kamera Laserliner
- Kamera Blaupunkt
- Kamera JVC
- Kamera Leica
- Kamera Hitachi
- Kamera Medion
- Kamera Exakta
- Kamera EZVIZ
- Kamera König
- Kamera Gembird
- Kamera Powerfix
- Kamera Alpine
- Kamera Netgear
- Kamera Maginon
- Kamera Avaya
- Kamera Nest
- Kamera Vtech
- Kamera BenQ
- Kamera Bresser
- Kamera Anker
- Kamera Sigma
- Kamera Pentax
- Kamera Rollei
- Kamera Xiaomi
- Kamera Moultrie
- Kamera Viewsonic
- Kamera Imou
- Kamera Polaroid
- Kamera Ricoh
- Kamera Aida
- Kamera Konica-Minolta
- Kamera Foscam
- Kamera Kyocera
- Kamera GoPro
- Kamera Lorex
- Kamera Cobra
- Kamera Velleman
- Kamera FLIR
- Kamera Swann
- Kamera Eufy
- Kamera Celestron
- Kamera Ring
- Kamera Fluke
- Kamera Hikvision
- Kamera AVerMedia
- Kamera Reolink
- Kamera EVE
- Kamera Prixton
- Kamera Marshall Electronics
- Kamera General Electric
- Kamera SPC
- Kamera Hanwha
- Kamera ARRI
- Kamera BirdDog
- Kamera Bauhn
- Kamera MuxLab
- Kamera Spypoint
- Kamera Vivitar
- Kamera Ansco
- Kamera Vimar
- Kamera Oregon Scientific
- Kamera Dahua Technology
- Kamera SereneLife
- Kamera Lexibook
- Kamera Intel
- Kamera SJCAM
- Kamera Scosche
- Kamera Speco Technologies
- Kamera Joy-It
- Kamera Kogan
- Kamera Levenhuk
- Kamera Emerson
- Kamera Minox
- Kamera Burris
- Kamera Silvergear
- Kamera Elmo
- Kamera AViPAS
- Kamera UniView
- Kamera AquaTech
- Kamera Alfatron
- Kamera BZBGear
- Kamera PTZ Optics
- Kamera Daitsu
- Kamera Agfa
- Kamera AgfaPhoto
- Kamera Argus
- Kamera Lumens
- Kamera Yashica
- Kamera Sygonix
- Kamera Mamiya
- Kamera Zenit
- Kamera Fuji
- Kamera Minolta
- Kamera EverFocus
- Kamera RunCam
- Kamera SeaLife
- Kamera Aplic
- Kamera FIMI
- Kamera Meade
- Kamera Contax
- Kamera Sinji
- Kamera Traveler
- Kamera Digital Watchdog
- Kamera Getac
- Kamera Ikegami
- Kamera Pelco
- Kamera ZeissIkon
- Kamera Dorr
- Kamera HOLGA
- Kamera Praktica
- Kamera Hasselblad
- Kamera Moto Mods (Motorola)
- Kamera Fantasea Line
- Kamera Brinno
- Kamera Z CAM
- Kamera General
- Kamera Ergoguys
- Kamera Strex
- Kamera Leitz Focomat IIc
- Kamera Cosina
- Kamera Videology
- Kamera InfiRay
- Kamera Videotec
- Kamera GoXtreme
- Kamera IOptron
- Kamera Cambo
- Kamera Kobian
- Kamera Kyocera Yashica
- Kamera Red Digital Cinema
- Kamera Konica
- Kamera Akaso
- Kamera Seek Thermal
- Kamera Ikelite
- Kamera Adeunis
- Kamera Hoppstar
- Kamera PatrolEyes
- Kamera Camouflage
- Kamera HuddleCamHD
- Kamera Linhof
- Kamera Aquapix
- Kamera KanDao
Nyeste Kamera Manualer
28 December 2024
27 December 2024
26 December 2024
26 December 2024
26 December 2024
26 December 2024
25 December 2024
25 December 2024
23 December 2024
22 December 2024