Canon PowerShot SD500 Manual

Canon Videokamera PowerShot SD500

Læs nedenfor 📖 manual på dansk for Canon PowerShot SD500 (2 sider) i kategorien Videokamera. Denne guide var nyttig for 15 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/2

Direct Print

User Guide

Printer User Guide

Supplied with a

printer

Contents

of This Guide

Included accessories and

separately sold

equipment information.

Shoot images

with the camera.

Play back the

images.

Erase any

unwanted

images.

Learn the names

of camera

components.

Print the images.

Install the

software.

Connect the

camera to a

computer.

Download the

images to a

computer.

What you can do

with the software

The various ways

of using the

software

The following manuals are supplied with your

camera. Please refer to them as need be.

Reference Guides

System Map

Quick Start Guide

This Guide

Camera User Guide

• Camera User

Guide

• Software

Starter Guide

• ZoomBrowser

EX Software

User Guide

• ImageBrowser

Software User

Guide

These PDF format

manuals are

available on the

Canon website.

Please download

them from the

following URL:

http://web.canon.jp/

Imaging/

information-e.html

Install the battery

pack and the SD

card.

➜ Camera User Guide

B. Install the battery pack.

Slide the SD card slot/battery cover open. Push the battery

lock in the direction of the arrow and hold it while aligning

the on the battery pack and battery chamber to insert the

battery pack.

1Preparing the Camera

• Battery charger model names and types

vary by region.

C. Install the SD card.

Insert the SD card all the way until it clicks.

Slide the SD card slot/battery cover closed.

A.Charge the battery pack.

Place the battery pack in the battery charger and plug the

charger into a power outlet or attach the power cord to the

battery charger and plug the other end into a power outlet.

The charge indicator lights red while charging and changes to

green when the battery pack is charged.

Charging the battery pack takes approximately 95 minutes.

To remove the SD card

Push the SD card until the card clicks and then release it.

Use the button to select the items you wishor

to set, and the or button to change the value.

Check that the date and time shown are correct,

then press the FUNC./SET button.

C. Aim the camera at the subject and adjust the zoom to achieve the desired composition (see

“Zoom” in the “Quick Reference” section).

D.Focus and shoot.

Press the shutter button

halfway to focus.

• The camera focuses and

beeps twice.

B. Press the ON/OFF button to turn the camera on.

Set the date and time (first time the camera is

powered on).

Power Lamp

➜ Camera User Guide

2Shooting

A.Turn the mode dial to (Auto).

➜ Camera User Guide

A.Turn the mode dial to (Playback). B. Play back the images.

Use the

or button to display the image you wish to

see.

3Playback

➜ Camera User Guide

A.In Playback mode, use the

button to select an image to erase

( ) and press the button ( ).

B. When the confirmation screen appears, check that

[Erase] is selected and press the FUNC./SET button.

Select [Cancel] using the

or button to cancel without

erasing.

4Erasing an Image

Shooting/Playback Modes

Shooting Modes

Auto

Shoots with settings selected by the

camera.

Manual

You select the exposure compensation,

white balance or photo effect settings.

You can also access My Colors modes

and Digital Macro mode.

Zoom

The zoom can be adjusted from 37 to 111 mm (35mm film equivalent)

Changing the Displayed Information

Press the DISP. button to switch the displayed

information as follows.

Shooting Mode:

Auto

Auto with red-eye reduction

Flash on

Flash off

Slow Synchro

Flash

The flash setting changes with each push of the button.

*The flash cannot be set in some shooting modes.

Flash range: 50 cm – 5.0 m (1.6 – 16.4 ft.) (wide-angle)

50 cm – 3.0 m (1.6 – 9.8 ft.) (telephoto)

Red-eye reduction: This feature reduces the effect of light reflecting

back from the eyes and making them appear red.

Slow Synchro: The flash timing is adjusted to a slow shutter speed,

allowing you to shoot night scenes.

In addition, there are functions that can be set in each shooting mode. For details, see “Functions Available in Each

Shooting Mode” at the end of the Camera User Guide.

5Printing with a Direct Print Compatible Printer ➜ Direct Print User Guide

A.Connect the camera to the printer and turn on the printer’s power.

Set the camera to Playback mode and turn the power on.

B. , , appears* in the upper left corner of the camera’s LCD

monitor, indicating that the printer is ready to print.

* The displayed icon may vary depending on the printer model.

C. Display an image for printing and press the button.

The button will flash blue and the printing will start.

Camera Interface Cable Printers

Please turn over

Flash on with red-eye reduction

Quick Reference ➜ Camera User Guide

Symbol

Press the shutter button

all the way to shoot.

LCD monitor - On (No Information)

LCD monitor - On (Information View)

LCD monitor - Off

Playback Mode:

Standard Information View

Detailed Information View

No Information

Wide Angle:

Zoom out from the subject.

Telephoto:

Zoom in on the subject.

Macro/Infinity Mode

Press the / button to display the or on the LCD

monitor.

Displayed

Use this mode to shoot close-ups of flowers or small objects.

Recordable Area at Minimum Shooting Range

Max. wide angle setting: approx. 56 x 42 mm (2.2 x 1.7 in.)

Max. telephoto setting: approx. 105 x 79 mm (4.1 x 3.1 in.)

Use this mode to shoot scenery or distant subjects.

Battery Lock

Charge

Indicator

Special Scene

Select from 9 scene modes to shoot with

the most appropriate settings for the

scene.

Movie

For shooting movies.

Playback

View images you have taken

Playback Mode

Continuous Shooting, Self-timer

Press the button to cycle through the

drive modes as shown below.

Single Shot

Continuous

Shooting

Self-timer

Back

The shooting modes available to each mode dial

position, can be set using the FUNC. menu.

Quick-bright LCD

Pressing the DISP. button for at least

1 second switches the brightness to

the highest setting.*

* If the monitor is already set to its

maximum brightness in the Set up

menu, this function is not available.

Produkt Specifikationer

Mærke:	Canon
Kategori:	Videokamera
Model:	PowerShot SD500

Har du brug for hjælp?

Hvis du har brug for hjælp til Canon PowerShot SD500 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Videokamera Canon Manualer

Canon VIXIA HV20 Manual

12 Oktober 2024

Canon XA25 Manual

23 September 2024

Canon XH G1 Manual

22 September 2024

Canon Optura 300 Manual

12 September 2024

Canon ML-105 EF Manual

27 August 2024

Canon CT-V1 Manual

27 August 2024

Canon ME-20F SH Manual

24 August 2024

Canon PowerShot A85 Manual

19 August 2024

Canon EOS ELAN II/IIE Manual

18 August 2024

Canon 310XL Manual

15 August 2024

Videokamera Manualer

Nyeste Videokamera Manualer

Panasonic NV-MX2B Manual

21 December 2024

Philips TAI2000W Manual

21 December 2024

Kogan KADS1030AACA Manual

19 December 2024

15 December 2024

15 December 2024

15 December 2024

15 December 2024

15 December 2024

Vimar 14565.SL Manual

15 December 2024

Vimar 14565 Manual

15 December 2024