Casio Exilim EX-G1 Manual
Læs nedenfor 📖 manual på dansk for Casio Exilim EX-G1 (193 sider) i kategorien Kamera. Denne guide var nyttig for 17 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere
Side 1/193
E
Thank you for purchasing this CASIO product.
• Before using it, be sure to read the precautions contained in this User’s Guide.
• Keep the User’s Guide in a safe place for future reference.
• For the most up-to-date information about this product, visit the official EXILIM
Website at http://www.exilim.com/
To go to “Getting the Most Out of Dynamic Photo” click here!
Digital Camera
User’s Guide
2
As you unpack your camera, check to make sure that all items shown below are
included. If anything is missing, contact your original retailer.
Unpacking
Digital camera Rechargeable lithium ion
battery (NP-80) Charger unit (BC-80L)
* The shape of the power cord plug
varies according to country or
geographic area.
Power cord Strap
4 long screws
(for protector attachment)
2 short screws
(for use when protector is not
attached)
Protectors
Battery cover
opener
USB cable AV cable CD-ROM Quick Start Guide
To attach the strap to the camera
Attach strap here.
B
3
• The contents of this manual and the bundled Basic Reference are subject to
change without notice.
• The contents of this manual have been checked at each step of the production
process. Feel free to contact us if you notice anything that is questionable,
erroneous, etc.
• Any copying of the contents of this User’s Guide, either in part or its entirety, is
forbidden. Except for your own personal use, any other use of the contents of this
manual without the permission of CASIO COMPUTER CO., LTD. is forbidden
under copyright laws.
• CASIO COMPUTER CO., LTD. shall not be held liable for any damages or lost
profits suffered by you or any third party due to the use or malfunction of this
product.
• CASIO COMPUTER CO., LTD. shall not be held liable for any damages, lost
profits, or claims by third parties arising out of the use of Photo Transport or
YouTube Uploader for CASIO.
• CASIO COMPUTER CO., LTD. shall not be held liable for any damages or lost
profits caused by loss of memory contents due to malfunction, repair, or any other
reason.
• Note that the example screens and product illustrations shown in this User’s Guide
may differ somewhat from the screens and configuration of the actual camera.
LCD Panel
The liquid crystal panel of the monitor screen uses high-precision technology that
provides a pixel yield in ex that some very small number cess of 99.99%. This means
of pixels may not light or may remain lit at all times. This is due to the characteristics
of the liquid crystal panel, and does not indicate malfunction.
Read this first!
Take a few test shots
Before shooting your final image, shoot a test shot to ensure that the camera is
recording correctly.
4Contents
Contents
Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Read this first! . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
General Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Monitor Screen Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
❚❙
Quick Start Basics 13
What is a digital camera? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
What you can do with your CASIO camera . . . . . . . . . . . . . . . . . . . . . . . . . . 14
First, charge the battery prior to use.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
❚
To charge the battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
❚
To load the battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Configuring Basic Settings the First Time You Turn On the Camera. . . . . . . 19
Preparing a Memory Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
❚
Supported Memory Cards. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
❚
To load a memory card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
❚
To format (initialize) a new memory card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Turning the Camera On and Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
❚
To turn power on . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
❚
To turn off the camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Attaching a Protector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Holding the Camera Correctly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
To shoot a snapshot. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Viewing Snapshots . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Deleting Images. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
❚
To delete a single file . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
❚
To delete all files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Snapshot Shooting Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
❚
Auto Focus Restrictions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Shock resistant, Waterproof, Dustproof . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
❚❙
Snapshot Tutorial 35
Using the Control Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
❚
Specifying Control Panel Items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Changing the Image Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Size) . . 36
Using Flash . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(Flash) . . 40
Using the Self-timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Self-timer) . . 42
Specifying the Auto Focus Area . . . . . . . . . . . . . . . . . . . . . . . . (AF Area) . . 43
Specifying ISO Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (ISO) . . 45
Shooting with the REC Light . . . . . . . . . . . . . . . . . . . . . . . . . . (REC Light) . . 46
Using Face Detection . . . . . . . . . . . . . . . . . . . . . . . . . . . (Face Detection) . . 46
Shooting with the Make-up Mode . . . . . . . . . . . . . . . . . . . . . . . (Make-up) . . 48
Shooting Beautiful Scenery Images . . . . . . . . . . . . . . . . . . . (Landscape) . . 49
Changing the Control Panel Date/Time Style . . . . . . . . . . . . . . . . . . . . . . . . 50
Shooting with Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
❚
Optical Zoom and Digital Zoom Switch Point . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
5Contents
❚❙
Recording Movie Images and Audio 53
To record a movie . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Using Prerecord Movie . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Shooting a Snapshot while Shooting a Movie . . . . . . . . . . . . . . . . . . . . . . . . 56
Recording Audio Only . . . . . . . . . . . . . . . . . . . . . . . . . . (Voice Recording) . . 56
❚
To play back an audio recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
❚❙
Using BEST SHOT 58
What is BEST SHOT? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
❚
Some Sample Scenes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
To shoot an image with BEST SHOT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
❚
Creating Your Own BEST SHOT Setups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Shooting with AUTO BEST SHOT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Automatically Shooting at Regular Intervals . . . . . . . . . . . . . . . . (Interval) . . 63
Isolating Moving Subjects . . . . . . . . . . . . . . . . . . . . . (Multi-motion Image) . . 64
❚❙
Advanced Settings 65
Using On-screen Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
REC Mode Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (REC) . . 67
❚
Selecting a Focus Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Focus). . . 67
❚
Using Continuous Shutter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (CS) . . . 70
❚
Using the Self-timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Self-timer). . . 72
❚
Shooting with the REC Light . . . . . . . . . . . . . . . . . . . . . . . . . . (REC Light). . . 73
❚
Turning Movie Audio Recording On or Off . . . . . . . . . . . . . . .(Movie Audio). . . 73
❚
Using Auto Shutter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(Auto Shutter). . . 73
❚
Shooting with Face Detection . . . . . . . . . . . . . . . . . . . . . .(Face Detection). . . 77
❚
Reducing the Effects of Subject Movement . . . . . . . . . . . . . . . (Anti Shake). . . 77
❚
Specifying the Auto Focus Area . . . . . . . . . . . . . . . . . . . . . . . . . . (AF Area). . . 77
❚
Using the Auto Focus Assist Light . . . . . . . . . . . . . . . . . . .(AF Assist Light). . . 78
❚
Changing the Focus Frame Shape . . . . . . . . . . . . . . . . . . . (Focus Frame). . . 78
❚
Turning Digital Zoom On or Off . . . . . . . . . . . . . . . . . . . . . . .(Digital Zoom). . . 79
❚
Shooting with Quick Shutter . . . . . . . . . . . . . . . . . . . . . . . . .(Quick Shutter). . . 79
❚
Displaying the On-screen Grid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Grid) . . . 80
❚
Turning on Image Review . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(Review). . . 80
❚
Using Icon Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Icon Help). . . 80
❚
Configuring Power On Default Settings . . . . . . . . . . . . . . . . . . . . (Memory). . . 81
Image Quality Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Quality) . . 82
❚
Specifying Snapshot Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Size). . . 82
❚
Specifying Snapshot Image Quality . . . . . . . . . . . . . . . (Quality (Snapshot)). . . 82
❚
Specifying Movie Image Quality . . . . . . . . . . . . . . . . . . . . .(Quality (Movie)). . . 82
❚
Correcting Image Brightness . . . . . . . . . . . . . . . . . . . . . . . . . . . . (EV Shift). . . 83
❚
Controlling White Balance . . . . . . . . . . . . . . . . . . . . . . . . . (White Balance). . . 83
❚
Specifying ISO Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(ISO). . . 84
❚
Specifying the Metering Mode . . . . . . . . . . . . . . . . . . . . . . . . . . .(Metering). . . 85
❚
Optimizing Image Brightness . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Lighting). . . 85
❚
Using Built-in Color Filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Color Filter). . . 86
❚
Controlling Image Sharpness . . . . . . . . . . . . . . . . . . . . . . . . . . (Sharpness). . . 86
6Contents
❚
Controlling Color Saturation . . . . . . . . . . . . . . . . . . . . . . . . . . . (Saturation). . . 86
❚
Adjusting Image Contrast . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Contrast). . . 86
❚
Specifying Flash Intensity . . . . . . . . . . . . . . . . . . . . . . . . . (Flash Intensity). . . 86
❚❙
Viewing Snapshots and Movies 87
Viewing Snapshots . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
Viewing a Movie. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
Viewing Continuous Shutter Images . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
❚
Deleting Continuous Shutter Images . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
❚
Dividing Up a CS Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
Zooming an On-screen Image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
Displaying the Image Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
Displaying Images in the Calendar Screen . . . . . . . . . . . . . . . . . . . . . . . . . . 91
Viewing Snapshots and Movies on a TV Screen. . . . . . . . . . . . . . . . . . . . . . 92
❚❙
Other Playback Functions (PLAY) 94
Playing a Slideshow on the Camera . . . . . . . . . . . . . . . . . . . . (Slideshow) . . 94
❚
Saving Music from Your Computer to Camera Memory . . . . . . . . . . . . . . . . . . . 95
Laying Out Snapshots with Layout Print . . . . . . . . . . . . . . . (Layout Print) . . 97
Creating a Snapshot of Movie Frames . . . . . . . . . . . . . (MOTION PRINT) . . 98
Editing a Movie on the Camera . . . . . . . . . . . . . . . . . . . . (Movie Editing) . . 99
Optimizing Image Brightness . . . . . . . . . . . . . . . . . . . . . . . . . . .(Lighting) . 101
Using Red Eye Correction . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Red Eye) . 101
Adjusting White Balance . . . . . . . . . . . . . . . . . . . . . . . . . (White Balance) . 102
Adjusting the Brightness of an Existing Snapshot . . . . . . . . .(Brightness) . 103
Selecting Images for Printing . . . . . . . . . . . . . . . . . . . . . (DPOF Printing) . 103
Protecting a File Against Deletion . . . . . . . . . . . . . . . . . . . . . . . . (Protect) . 104
Editing the Date and Time of an Image . . . . . . . . . . . . . . . . . (Date/Time) . 105
Rotating an Image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Rotation) . 105
Resizing a Snapshot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(Resize) . 106
Cropping a Snapshot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(Trimming) . 106
Adding Audio to a Snapshot . . . . . . . . . . . . . . . . . . . . . . . . . . . (Dubbing) . 107
❚
To play snapshot audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
Copying Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Copy) . 108
❚❙
Dynamic Photo 109
To create a subject image to be inserted . . . . . . . . . . . . (Dynamic Photo) . 109
Inserting a Subject into a Background Image . . . . . . . . . (Dynamic Photo) . .111
❚
To view a Dynamic Photo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112
Converting a Dynamic Photo to a Movie . . . . . . . . . . . (Movie Converter) . 113
❚❙
Printing 114
Printing Snapshots. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114
Connecting Directly to a PictBridge Compatible Printer . . . . . . . . . . . . . . . 114
7Contents
Using DPOF to Specify Images to be Printed and
the Number of Copies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117
❚❙
Using the Camera with a Computer 120
Things you can do using a computer... . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
Using the Camera with a Windows Computer . . . . . . . . . . . . . . . . . . . . . . . 121
❚
Viewing and Storing Images on a Computer. . . . . . . . . . . . . . . . . . . . . . . . . . . 122
❚
Playing Movies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125
❚
Uploading Movie Files to YouTube . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126
❚
Transferring Images from Your Computer to Camera Memory. . . . . . . . . . . . . 128
❚
Viewing User Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . (PDF Files). . 130
❚
User Registration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130
Using the Camera with a Macintosh . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131
❚
Connecting the Camera to Your Computer and Saving Files . . . . . . . . . . . . . . 131
❚
Transferring Images Automatically and Managing Them
on Your Macintosh . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133
❚
Playing a Movie. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134
❚
Viewing User Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . .(PDF Files). . 135
❚
User Registration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135
Files and Folders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136
Memory Card Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137
❚❙
Other Settings (Set Up) 139
Adjusting Monitor Screen Brightness . . . . . . . . . . . . . . . . . . . . . (Screen) . 139
Configuring Camera Sound Settings . . . . . . . . . . . . . . . . . . . . . (Sounds) . 140
Configuring a Startup Image . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Startup) . 140
Specifying the File Name Serial Number Generation Rule . . . . . (File No.) . 141
Configuring World Time Settings . . . . . . . . . . . . . . . . . . . . . (World Time) . 141
Time Stamping Snapshots . . . . . . . . . . . . . . . . . . . . . . . . . . (Timestamp) . 142
Setting the Camera’s Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Adjust) . 143
Specifying the Date Style . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Date Style) . 143
Specifying the Display Language . . . . . . . . . . . . . . . . . . . . . . (Language) . 144
Configuring Sleep State Settings . . . . . . . . . . . . . . . . . . . . . . . . . (Sleep) . 144
Configuring Auto Power Settings . . . . . . . . . . . . . . . . . . (Auto Power Off) . 145
Configuring [p] Setting . . . . . . . . . . . . . . . . . . . . . . . . . . (P Power On) . 145
Configuring USB Protocol Settings . . . . . . . . . . . . . . . . . . . . . . . . . (USB) . 146
Selecting the Screen Aspect Ratio and Video Output System (Video Out) . 146
Formatting Built-in Memory or a Memory Card . . . . . . . . . . . . . . (Format) . 147
Resetting the Camera to Factory Defaults . . . . . . . . . . . . . . . . . . (Reset) . 147
❚❙
Configuring Monitor Screen Settings 148
Using the On-screen Histogram to Check Exposure . . . . . . . . . . . . . . . . . . 148
❚
How to Use the Histogram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148
8Contents
❚❙
Appendix 150
Precautions during Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150
Power Supply. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157
❚
Charging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157
❚
To replace the battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158
❚
Battery Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158
❚
Using the Camera in another Country . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 159
Using a Memory Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160
❚
To replace the memory card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160
Computer System Requirements
for Bundled Software . . . . . . . . . . . . . . . . . . . . . . . . .(Bundled CD-ROM) . 162
Reset Initial Default Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 163
When things don’t go right... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
❚
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
❚
Display Messages. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171
Number of Snapshots/Movie Recording Time/Voice Recording Time . . . . . 173
Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 175
9
The numbers in parentheses indicate the pages where each item is explained.
. Camera
General Guide
1Shutter button (page 25)
2[ON/OFF] (Power)
(page 22)
3[BS] button (page 58)
4Flash (page 40)
5Front lamp
(pages 24, 42)
6Lens
7Microphone
(pages 54, 107)
8Zoom button
(pages 25, 50, 90, 91)
9Back lamp
(pages 22, 26, 40)
bk[0] (movie) button
(page 53)
bl Cover lock dial
(pages 21, 92, 122,
131)
bm
Memory card slot
(pages 21, 160)
bnUSB/AV port
(pages 92, 115, 123,
132)
boStrap hole (page 2)
bpMemory card/
Terminal cover
(pages 21, 92, 115,
122, 131, 160)
bq[SET] button (page 35)
br[MENU] button
(page 65)
bsControl button
([8] [2] [4] [6])
(pages 29, 35, 40, 65,
148)
bt[p] (PLAY) button
(pages 22, 28)
ckSpeaker
cl Monitor screen
(pages 10, 148)
6
34521
7
bqbrbs bp
bo
bn
bm
98
ck
bk bl
cl bt
Back
cm
Tripod hole
Use this hole when attaching to a tripod.
cnBattery slot (pages 17, 158)
coProtector installation holes (page 23)
cnco
cm
Bottom
Front
10
.Charger Unit
The monitor screen uses various indicators, icons, and values to keep you informed
of the camera’s status.
• The sample screens in this section are intended to show you the locations of all the
indicators and figures that can appear on the monitor screen in various modes.
They do not represent screens that actually appear on the camera.
. Snapshot Recording
Monitor Screen Contents
1Remaining snapshot memory
capacity (page 173)
2Remaining movie memory capacity
(page 53)
3Recording mode (page 25)
4White balance setting (page 83)
5Continuous shutter (page 70)
6Image deterioration indicator
(page 51)
7Metering mode (page 85)
8Snapshot image size (page 36)
9Snapshot image quality (page 82)
bkMovie image quality (page 39)
bl Flash (page 40)
bm
Self-timer (page 72)
bnAF Area (page 43)
boISO sensitivity (page 45)
bpREC Light (page 46)
bqFace Detection/Make-up/Landscape
(pages 46, 48, 49)
brDate/time (page 50)
bsTimestamp indicator (page 142)
bt Exposure compensation (page 83)
ckFocus frame (pages 26, 44)
cl Battery level indicator (page 18)
cm
Histogram (page 148)
cnAnti Shake (page 77)
coAuto shutter (page 73)
cpFocus mode (page 67)
cqMovie audio recording off indicator
(page 73)
3
21
1+7- Contacts
2[CHARGE] Lamp
3AC jack
bq
bk
bl
bm
bo
bp
bn
brbs
89341 65 7
ckcl
2
bt
cn
co
cp
cq
cm
11
.Shutter Button Half-pressed
.Movie Recording
1Recording mode (page 25)
2Flash (page 40)
3ISO sensitivity (page 45)
4Aperture value
5Shutter speed
6Focus frame (pages 26, 44)
NOTE
• If the current aperture, shutter speed, ISO sensitivity, or Auto Exposure is not
correct, the setting will turn orange when you half-press the shutter button.
1Flash (page 40)
2Recording mode (page 53)
3White balance setting (page 83)
4Remaining movie memory capacity (page 53)
5Movie recording time (page 53)
6Exposure compensation (page 83)
7Battery level indicator (page 18)
8Histogram (page 148)
9Anti Shake (page 77)
bkMovie recording indicator (page 53)
blMovie audio recording off indicator (page 73)
63
2
4
5
1
1 2 3
7 6
8
9
4
5
bk
bl
12
.Snapshot Viewing
.Movie Playback
1File type
2Protect indicator (page 104)
3Folder name/file name (page 136)
4Snapshot image quality (page 82)
5Snapshot image size (page 36)
6ISO sensitivity (page 45)
7Aperture value
8Shutter speed
9Date/time (page 50)
bkMetering mode (page 85)
blWhite balance setting (page 102)
bmFlash (page 40)
bnRecording mode
boBattery level indicator (page 18)
bpHistogram (page 148)
bqExposure compensation (page 83)
1Movie audio recording off indicator (page 73)
2File type
3Protect indicator (page 104)
4Folder name/file name (page 136)
5Movie recording time (page 87)
6Movie image quality (page 39)
7Date/time (page 50)
8Battery level indicator (page 18)
31
bp
bq
bo blbkbmbn
4
7
5
8
9
6
2
21
5
6
8
3 4
7
13 Quick Start Basics
Quick Start Basics
What is a digital camera?
Delete
A digital camera stores images on a memory card, so you can record and
delete images a countless number of times.
Play
Record
You can use the images you record in a variety of different ways.
Store images on your
computer.
Print images. Attach images to e-mail.
14 Quick Start Basics
Your CASIO camera is packed with a powerful selection of features and functions to
make recording of digital images easier, including the following main functions.
What you can do with your CASIO camera
Tough, Shock resistant construction
Applying the same technology developed for the G-SHOCK wristwatch, this
camera has passed drop testing from a height of 2.13 meters/7 feet* for a level
of shock resistance that dramatically outperforms previous models.
*Based on CASIO test equivalent to MIL-Standard 810F Method 516.5-Shock
(page 31).
Waterproof, Dustproof, Freezeproof
In addition to IEC/JIS Protection Class 8 (IPX8)* and
Protection Class 6 (IPX6) equivalent waterproofing that
allows immersion up to 3.0 meters, this camera also
conforms to IEC/JIS Protection Class 6 (IP6X)
dustproofing, which effectively shuts out sand, dirt, and
dust. Freezeproofing up to –10°C means it can be used while skiing and in
other cold temperature environments.
*Based on CASIO test.
See page 31 for more information.
15 Quick Start Basics
Dynamic Photo
Extract a moving subject out of a series of Continuous Shutter images you have
shot and insert them into another image to create a Dynamic Photo image that
features the moving subject.
Interval
Recording
This feature automatically records images at fixed intervals. You can fix the
camera to a bicycle or automobile and have it shoot at regular intervals as you
travel. This feature is also ideal to shoot changes in clouds, flowers, and
crowds.
See page 109 for more information.
See page 63 for more information.
16 Quick Start Basics
Note that the battery of a newly purchased camera is not charged. Perform the steps
under “To charge the battery” to bring the battery to a full charge.
• Your camera requires a special CASIO rechargeable lithium ion battery (NP-80) for
power. Never try to use any other type of battery.
1. Positioning the positive + and
negative - terminals of the battery
with those of the charger unit, load
the battery into the charger unit.
2. Plug the charger unit into a
household power outlet.
About 100 minutes are required to
reach full charge. The [CHARGE]
lamp will go out when charging is
complete. Unplug the power cord
from the power outlet and then
remove the battery from the
charger.
First, charge the battery prior to use.
To charge the battery
Lamp Status Description
Lit Red Charging
Flashing Red Abnormal ambient temperature, charger problem, or
battery problem (page 157)
Off Charging complete
[CHARGE] lamp
17 Quick Start Basics
Other Charging Precautions
• Use the special charger (BC-80L) to charge the special lithium ion battery (NP-80).
Never use any other type of charger device. Attempting to use a different charger
can result in unexpected accident.
• A battery that is still warm due to normal use may not charge fully. Give the battery
time to cool before charging it.
• A battery discharges slightly even when it is not loaded in the camera. Because of
this, it is recommended that you charge the battery immediately before you need to
use it.
• Charging the camera’s battery may cause interference with TV and radio reception.
If this happens, plug the charger into an outlet that is further away from the TV or
radio.
• Actual charging time depends on current battery capacity and charging conditions.
1. Open the battery cover.
Slide the battery cover slider towards 4 and
then open it as indicated by the arrows in the
illustration.
2. Load the battery.
With the EXILIM logo on the
battery facing downwards (in
the direction of the lens),
hold the stopper next to the
battery in the direction
indicated by the arrow as
you slide the battery into the
camera. Press the battery in
until the stopper secures it in
place.
To load the battery
2
1
EXILIM logo
Stopper
Front Back
Battery contacts
18 Quick Start Basics
3. Close the battery cover.
Close the battery cover completely until it
clicks securely in place.
• For information about how to replace the
battery, see page 158.
Checking Remaining Battery Power
As battery power is consumed, a battery indicator on the monitor screen indicates
remaining power as shown below.
indicates battery power is low. Charge the battery as soon as possible.
Recording is not possible when is indicated. Charge the battery immediately.
• The level shown by the battery indicator may change when you switch between the
REC mode and PLAY mode.
• Leaving the camera for about two days with no power supplied while the battery is
dead will cause its date and time settings to be cleared. A message telling you to
configure time and date settings will appear the next time you turn on the camera
after restoring power. When this happens, configure date and time settings (page
143).
• See page 177 for information about battery life and memory capacity.
Battery Power Conservation Tips
• When you do not need to use the flash, select ? (Flash Off) for the flash setting
(page 40).
• Enable the Auto Power Off and the Sleep features to protect against wasting
battery power when you forget to turn off the camera (pages 144, 145).
Remaining Power High Low
Battery Indicator * * *
Indicator Color Cyan *Amber *Red Red*
19 Quick Start Basics
The first time you load a battery into the camera, a screen appears for configuring the
display language, date, and time settings. Failure to set the date and time correctly
will cause the wrong date and time data to be recorded with images.
IMPORTANT!
• A screen for language selection will not appear in step 2 of the procedure below if
you purchased a camera intended for the Japanese market. To change the display
language from Japanese in this case, use the procedure under “Specifying the
Display Language (Language)” (page 144). Note that a version of this manual in
the language you select may not be included with a camera intended for the
Japanese market.
1. Press [ON/OFF] (Power) to turn on the
camera.
2. Use [8], [ ], [2 4], and [6] to select the
language you want and then press
[SET].
3. Use [8] and [2] to select a date style and then press [SET].
Example: July 10, 2012
YY/MM/DD * 12/7/10
DD/MM/YY * 10/7/12
MM/DD/YY * 7/10/12
4. Set the date and the time.
Use [4] and [6] to select the setting you want to
change and then use [8] and [2] to change it.
To switch between 12-hour and 24-hour format, press
[BS].
5. After setting the date and time, use [4] and [6]
to select “Apply” and then press [SET].
Configuring Basic Settings the First Time You Turn On the
Camera
[ON/OFF] (Power)
[BS]
20 Quick Start Basics
NOTE
• Each country controls its local time offset and the use of summer time, and so they
are subject to change.
• Removing the battery from the camera too soon after configuring time and date
settings for the first time can cause the settings to be reset to their factory defaults.
Do not remove the battery for at least 24 hours after configuring settings.
Though the camera has built-in memory that can be used to store images and
movies, you probably will want to purchase a commercially available memory card for
greater capacity. The camera does not come with a memory card. Images recorded
while a memory card is loaded are saved to the memory card. When no memory card
is loaded, images are saved to built-in memory.
• For information about memory card capacities, see page 173.
If you make a mistake configuring display language, date, or time settings with the
above procedure, refer to the following pages for information about how to correct
the settings.
– Display language: Page 144
– Date and time: Page 143
Preparing a Memory Card
Supported Memory Cards
– microSD Memory Card
– microSDHC Memory Card
Use one of the above types of memory card.
Warning!
+microSD/microSDHC memory cards present a swallowing hazard for small
children.
+Keep microSD/microSDHC memory cards out of the reach of small children.
Should a memory card ever be swallowed accidentally, consult a physician
immediately.
*
21 Quick Start Basics
1. Press [ON/OFF] (Power) to turn off the
camera. Next, rotate the cover lock dial
in the [4OPEN] direction and open the
memory card/terminal cover.
2. Load a memory card.
Positioning the memory
card so its front is facing
in the direction of the
lens, slide it into the
card slot all the way in
until you hear it click
securely into place.
3. Close the memory card/terminal cover.
Close the memory card/terminal cover completely
until it clicks securely in place.
• For information about how to replace the memory
card, see page 160.
IMPORTANT!
• Be sure to orient the memory card correctly when
loading it into the camera. Trying to force a card while it is incorrectly oriented can
damage it.
• Be sure to read the user documentation that comes with the microSD/microSDHC
memory card.
• Never insert anything besides a supported memory card (page 20) into the memory
card slot.
• Should water or any foreign object ever get into the card slot, immediately turn off
the camera, remove the battery, and contact your retailer or nearest CASIO
authorized service center.
• Never remove the memory card from the camera while it is being accessed. Doing
so can cause problems with proper file transfer, damage the memory card, etc.
To load a memory card
2
1
Front Back
Back
22 Quick Start Basics
You need to format a new memory card before using it for the first time.
1. Turn on the camera and press [MENU].
2. Select the “Set Up” tab, select “Format” and then press [6].
3. Use [8] and [2] to select “Format” and then press [SET].
IMPORTANT!
• Formatting a memory card that already has snapshots or other files on it, will delete
its contents. Normally you do not need to format a memory card again. However, if
storing to a card has slowed down or if you notice any other abnormality, re-format
the card.
• Be sure to use the camera to format a memory card. Formatting a memory card on
a computer and then using it in the camera can slow down data processing by the
camera. In the case of a microSD or microSDHC memory card, formatting on a
computer can result in non-conformity with the SD format, causing problems with
compatibility, operation, etc.
Pressing [ON/OFF] (Power) turns power on and enters
the REC mode.
Pressing or holding down [p] (PLAY) turns on the
camera and enters the PLAY mode. Pressing [ ] p
(PLAY) again switches to the REC mode.
• The back lamp lights green momentarily when you
turn on the camera.
• The Sleep function or Auto Power Off (pages 144,
145) will turn off power automatically if you do not
perform any operation for a preset amount of time.
Press [ON/OFF] (Power).
To format (initialize) a new memory card
Turning the Camera On and Off
To turn power on
To turn off the camera
[ON/OFF] (Power)
Back lamp
[p] (PLAY)
23 Quick Start Basics
The camera comes with two protectors. Attaching one of the protectors helps to
protect the side of the camera against damage if it is dropped.
. About the screws that come with the camera
The camera comes with a total of six screws: four long screws for attaching a
protector, and two short screws. The short screws are extra replacements for the
screws that are in the holes in the side of the camera when a protector is not
attached.
1. Remove the two short screws from the
holes on the lens side of the camera.
• Store the short screws in a safe place
where they will not become lost.
2. Attach one of the protectors and
secure it in place with the two long
screws.
• The camera comes with a total of four long
screws for attaching the protector. Two
are required for installation and the other
two are spares.
IMPORTANT!
• Use a commercially available precision screwdriver (#0) to loosen and tighten the
screws.
• Never attempt to loosen or remove any other of the camera’s screws except those
specifically noted above.
• Whenever a protector is not attached to the camera, be sure to fill the two holes on
the lens side with the original short screws or the two extra short screws that come
with the camera.
Attaching a Protector
24 Quick Start Basics
Your images will not come out clearly if you move the camera when you press the
shutter button. When pressing the shutter button, be sure to hold the camera as
shown in the illustration below, and keep it still by pressing your arms firmly against
your sides as you shoot.
Holding the camera still, carefully press the shutter button and take care to avoid all
movement as the shutter releases and for a few moments after it releases. This is
especially important when available lighting is low, which slows down the shutter
speed.
NOTE
• Take care that your fingers and the
strap do not cover any of the areas
indicated in the illustration.
• To protect against accidentally
dropping the camera, attach the
wrist strap and make sure it is
around your fingers or wrist while
you are operating the camera.
• Never swing the camera around by
its strap.
• The supplied strap is intended for
use with this camera only. Never use
it for any other purpose.
Holding the Camera Correctly
Horizontal Vertical
Hold the camera so the flash is
above the lens.
Front lamp
Flash
Lens
Microphone
Strap
25 Quick Start Basics
1. Press [ON/OFF] (Power) to turn on the camera.
Make sure R is on the display. If it isn’t, see page 58.
2. Point the camera at
the subject.
You can zoom the
image, if you want.
To shoot a snapshot
Snapshot mode icon
Remaining Snapshot Memory Capacity
(page 173)
Monitor screen
Shutter button
[ON/OFF] (Power)
w z Wide Angle Telephoto
Zoom button
26 Quick Start Basics
3. Half-press the shutter button to
focus the image.
When focus is complete, the camera will
beep, the back lamp will light green, and
the focus frame will turn green.
4. Continuing to keep the camera still, press the shutter button the rest of
the way down.
This records the snapshot.
When you half-press the shutter button, the
camera automatically adjusts exposure and
focuses on the subject it is currently pointed
at. Mastering how much pressure is required
for a half-press and a full-press of the shutter
button is an important technique for good-
looking images.
• The focus frame in the screen shots
included in this manual is shown at ß.
Note that you can change the form of the
focus frame, if you want (page 78).
Shooting a Movie
Press [0] (Movie) to start
movie recording. Press
[0] (Movie) again to stop
movie recording. See
page 53 for details.
Focus frame
Back lamp
Half-press
Press lightly
until the
button stops.
Beep, beep (Image is in focus.)
Full-press
Snap (Image is recorded.)
[0] (Movie)
27 Quick Start Basics
. Using Quick Shutter
Fully pressing the shutting button without waiting for Auto Focus to operate will record
using Quick Shutter (page 79).
• With Quick Shutter, the camera focuses faster than normal Auto Focus, which
means you can capture quick moving action more easily. Note, however, that some
images may be out of focus when Quick Shutter is used.
• Whenever possible, take a little extra time to half-press the shutter button in order
to ensure proper focus.
. If the image does not focus...
If the focus frame stays red and the back lamp is flashing green, it means that the
image is not in focus (because the subject is too close, etc.). Re-point the camera at
the subject and try to focus again.
. If the subject is not in the center of the frame...
“Focus lock” (page 69) is the name of a technique you can use when you want to
shoot an image in which the subject to be focused on is not within the focus frame in
the center of the screen.
. To track the movement of a moving subject
Half-press the shutter button to follow and focus automatically on a moving subject.
See “Ë Tracking” (page 43) for more information.
28 Quick Start Basics
Use the following procedure to view snapshots on the camera’s monitor screen.
• For information about how to play back movies, see page 87.
1. Press [p] (PLAY) to enter the
PLAY mode.
• This will display one of the snapshots
currently stored in memory.
• Information about the displayed
snapshot also is included (page 12).
• You also can clear the information to
view only the snapshot (page 148).
• You can zoom in on the image by
pressing the z side of the zoom button (page 90). If you are recording a
snapshot that is very important to you, it is recommended that you zoom the
image and check its details after recording it.
2. Use [4] and [6] to scroll between images.
• Holding down either button scrolls at high speed.
NOTE
• Half-pressing the shutter button while in the PLAY mode or while a menu screen is
displayed will switch directly to the REC mode.
Viewing Snapshots
[p] (PLAY)
[ ]6 [ ]6
[ ]4 [ ]4
29 Quick Start Basics
If memory becomes full, you can delete images you no longer need to free up storage
and record more images.
IMPORTANT!
• Remember that a file (image) delete operation cannot be undone.
• Deleting an audio snapshot (page 107) deletes both the snapshot and the audio
file.
1. Press [p] (PLAY) to enter the PLAY mode and then
press [2] ( ).
2. Use [4] and [6] to scroll through the files until the one you want to
delete is displayed.
3. Use [8] and [2] to select “Delete” and then press [SET].
• To delete other files, repeat steps 2 and 3.
• To exit the delete operation, press [MENU].
1. Press [p] (PLAY) to enter the PLAY mode and then press [2] ( ).
2. Use [8] and [2] to select “Delete All Files” and then press [SET].
3. Use [8] and [2] to select “Yes” and then press [SET] to delete all files.
This will cause the message “There are no files” to appear.
Deleting Images
To delete a single file
To delete all files
30 Quick Start Basics
Operation
• Never open the battery cover while the back lamp is flashing green. Doing so can
result in the image you just shot being saved incorrectly, damage to other images
stored in memory, malfunction of the camera, etc.
• If unwanted light is shining directly onto the lens, shade the lens with your hand
when shooting an image.
Monitor Screen when Shooting Snapshots
• Subject brightness conditions can cause monitor screen response to slow and can
cause digital noise in the monitor screen image.
• The image that appears on the monitor screen is for image composition. The actual
image will be recorded at the quality set for the image quality setting (page 82).
Shooting Indoors under Fluorescent Lighting
• Minute flickering of fluorescent lighting can affect the brightness or color of an
image.
• Any of the following can make proper focus impossible.
– Solid color wall or other very low contrast subject
– Strongly back lit subject
– Very shiny subject
– Blinds or other subject with a repeating horizontal pattern
– Multiple subjects at varying distances from the camera
– Subject in a dark location
– Subject that is too far away for light from the AF assist light to reach
– Camera movement while shooting
– Fast-moving subject
– Subjects outside the focus range of the camera
• If you cannot focus properly, try using focus lock (page 69) or Manual Focus (page
67).
Snapshot Shooting Precautions
Auto Focus Restrictions
31 Quick Start Basics
This camera is designed to be shock resistant, waterproof, and dustproof as
described below.
0 Shock resistant:
This camera has passed drop testing from a height of 2.13 meters/7 feet onto a *
plywood (lauan material)* 1.
*Based on CASIO test equivalent to MIL-Standard 810F Method 516.5-Shock.
(6 faces, 8 corners, 12 edges: Total of 26 drops.)
0 Waterproof:
Corresponds to IEC/JIS Protection Class 8 (IPX8)* 2 and Protection Class 6 (IPX6)
equivalent waterproofing that allows immersion up to 3.0 meters for 60 minutes and
protection against jet spray from all directions.* 3
0 Dustproof:
Corresponds to IEC/JIS Protection Class 6 (IP6X) dustproofing.
*1 Though the camera is designed to withstand the effects of impact occurring during
normal daily use, very strong impact due to very rough handling such as throwing the
camera or dropping it from excessive heights can result in serious damage. Even if a
drop does not result in functional problems, it can cause scratching and other cosmetic
damage to the camera.
*2 Signifies underwater use when immersed for a duration and at a pressure specified by
CASIO.
*3 Test conditions defined by CASIO. Does not include cases where battery life is
shortened due to use conditions.
IMPORTANT!
• The shock resistance, waterproofing, and dustproofing of this product are based on
CASIO test results, and do not constitute any guarantee that the product will
perform, will not be damaged, or will not malfunction under such conditions.
. Precautions before Underwater Use
This camera can be used to shoot images underwater up to a depth of 3.0 meters.
However, the following precautions should be kept in mind before using the camera
underwater.
• Check the contact surfaces of the battery cover and memory card/terminal cover
gaskets for dirt, sand, and any other foreign matter. Clean contact surfaces by
wiping them with a soft, clean, dry cloth. Note that a single strand of hair or a single
grain of sand can allow water to leak into the camera.
• Check the battery cover and memory card/terminal cover waterproofing gaskets
are free of cracks, scratches, and other damage.
• Close the battery cover and memory card/terminal cover completely, until they click
securely into place.
• Never open or close the battery cover or memory card/terminal cover while near
water or in an area exposed to sea breezes. Also avoid opening or closing the
covers while your hands are wet.
Shock resistant, Waterproof, Dustproof
32 Quick Start Basics
• This camera will sink if dropped underwater. Use the strap or some other means to
avoid dropping.
• The waterproofing of this camera protects it against salt water and fresh water only.
Protection is not provided against hot spring water.
• Never leave the camera for long periods in a location subjected to very low
temperatures or very high temperatures in excess of 40 °C. In particular, avoid
leaving the camera in areas exposed to strong direct sunlight, in a motor vehicle on
a hot day, etc. Any of these conditions can result in a deterioration of
waterproofing.
. Precautions during Underwater Use
• The camera is designed for use at depths no greater than 3.0 meters and at water
temperatures within the range of 0 °C °C to 40 .
• Do not leave the camera submerged for longer than 60 minutes.
• When repeatedly immersing the camera for underwater user, allow at least
15 minutes to elapse between immersions.
• Never open the battery cover or memory card/terminal cover while the camera is
submerged.
• Do not dive into water while holding the camera. Also, do not use the camera in
rapids, under a waterfall, or in any other rough water condition. Exposing the
camera to strong water pressure can cause leaking and malfunction.
• Take care that you do not drop the camera into water or allow it to strike the
surface of the water. Doing so can cause leaking.
. Precautions after Underwater Use
• Before opening the battery cover or memory card/terminal cover, use a clean, dry,
soft cloth to wipe the camera free of all moisture and dirt.
• If you open the battery cover or the memory card/terminal cover while the camera
is wet, be sure to wipe its inside surfaces free of all moisture before closing it.
33 Quick Start Basics
. Cleaning Your Camera after Use
Perform the following steps to clean the camera after using it under water or after it
becomes soiled with sand, dirt, or mud. Note that the battery cover and memory card/
terminal cover must be closed securely when performing these steps.
1. Immerse the camera in fresh water.
• Fill a bucket or other container with tap water or other fresh
water, and immerse the camera for about 10 minutes.
Gently wipe dust, dirt, sand, and other matter from the
camera with your fingers.
• Do not rub the lens surface, monitor screen, or flash
window while dirty.
2. Wipe the camera dry.
• Use a clean, dry, soft cloth to wipe off the camera, and leave it in a shady place
to dry.
IMPORTANT!
• The temperature of the water used to wash the camera should be no greater than
30°C. Never use detergent, hot water, or strongly running water to clean the
camera. Doing so creates the risk of leaking and malfunction.
• Never swing the camera around to remove water, and never use a dryer or other
intense heat to dry it.
• Never place the camera in a washing machine to wash it.
. Precautions after Use
• Do not leave the camera in an area exposed to extreme heat (40°C or greater) or
cold (–10°C or lower). Doing so can cause loss of waterproofing.
• Never use chemical agents for the purpose of cleaning, rust proofing, moisture
proofing, etc. Doing so can cause loss of waterproofing.
• Use fresh water to clean the camera within 60 minutes after using it underwater.
Failure to do so can cause deterioration of the exterior finish and waterproofing
properties.
• In order to maintain waterproofing, replacement of the camera’s gaskets is
recommended once each year. Note that you will be charged for gasket
replacement. Contact a CASIO authorized service center or your original retailer
for gasket replacement.
34 Quick Start Basics
. Other Precautions
• The accessories that come with the camera (battery, etc.) are not waterproof.
• Subjecting the camera to extreme impact can cause loss of waterproofing.
• Moisture on the camera can freeze in very cold environments. Ice left on the
camera can lead to malfunction. Do not allow moisture to remain on the camera
under cold conditions.
• Should water ever leak into the camera and cause malfunction due to improper
use, CASIO COMPUTER CO., LTD. will not be held liable for any damage to
internal components (battery, recording media, etc.), loss of recorded data, or any
expenses incurred to shoot lost images.
• CASIO COMPUTER CO., LTD. shall not be held liable for any accident that may
occur while the camera is being used underwater.
• CASIO COMPUTER CO., LTD. shall not be held liable for any damages or for any
accident (personal injury, etc.) that occurs while using the camera underwater.
35 Snapshot Tutorial
Snapshot Tutorial
The Control Panel can be used to configure camera settings.
1. In the REC mode, press [SET].
This will select one of the Control Panel icons and display its settings.
2. Use [8] and [2] to select the setting you want to change.
* Snapshot image quality cannot be changed using the Control Panel.
3. Use [4] and [6] to change the setting.
4. If you want to configure another setting, repeat steps 2 and 3.
5. After all of the settings are the way you want, press [SET].
This will apply the settings and return to the REC mode.
NOTE
• You also can configure settings other than those listed above (page 65).
• The Control Panel cannot be displayed while a Dynamic Photo, Prerecord Movie,
For YouTube, or Voice Recording Operation is in progress.
Using the Control Panel
[SET]
Control Panel
Available settings
[ ]8] [2] [4] [6 1
9
5
3
4
7
8
2
6
1Snapshot image size/quality*
(pages 36, 82)
2Movie image quality (page 39)
3Flash (page 40)
4Self-timer (page 42)
5AF Area (page 43)
6ISO sensitivity (page 45)
7REC Light (page 46)
8Face Detection/Make-up/Landscape
(pages 46, 48, 49)
9Date/Time (page 50)
36 Snapshot Tutorial
You can use the following procedure to specify the eight items you want on the
Control Panel.
1. While the Control Panel is displayed, press
[MENU].
• This will display a menu of Control Panel items, with
the items currently selected for display shown in
green.
2. Use [8], [2], [4], and [6] to select an item you
want on the Control Panel and then press [SET].
This will cause the lamp next to the item to light.
3. Repeat the above step to select eight items for the Control Panel.
After you select the eighth item, the camera switches to the REC mode and
displays the Control Panel.
• To exit the item select operation, press [MENU].
NOTE
• The “Date/Time” item at the bottom of the Control Panel is fixed and cannot be
changed.
• The screen shots in this manual show the initial default Control Panel items.
• To return the Control Panel items to their initial defaults, reset the camera (page
147).
.Pixels
A digital camera image is a collection of small
dots called “pixels”. The more pixels there are
in an image, the more detail there will be.
However, you generally can do with fewer
pixels when printing an image (L size) through
a print service, attaching an image to e-mail,
when viewing the image on a computer, etc.
Specifying Control Panel Items
Changing the Image Size (Size)
Pixel
37 Snapshot Tutorial
.About image sizes
The size of an image indicates how many pixels it contains, and is expressed as
horizontal pixels xvertical pixels.
Image Size Selection Tips
Note that larger images have more pixels, so they take up more memory space.
• For information about image size, image quality, and number of images that can be
stored, see page 173.
• For information about movie image size, see page 39.
• For information about resizing existing snapshots, see page 106.
8M (3264 x2448) size image =
Approximately 8 million pixels
*Unit: pixels
VGA (640 x480) size image =
Approximately 300,000 pixels
Large Number
of Pixels
More detail, but takes up more memory. Best
when you plan to print large-size prints (such
as A3 size).
Small Number
of Pixels
Less detail, but takes up less memory. Best
when you want to send images by e-mail,
etc.
3264*
2448*
640*
480*
38 Snapshot Tutorial
.To select the snapshot image size
1. In the REC mode, press [SET].
2. Use [8] and [2] to select the top Control Panel option (Snapshot
Image Size).
3. Use [4] and [6] to select an image size and then press [SET].
• The initial factory default image size setting is “12M”.
• Selecting “3:2” records images with an aspect ratio of 3:2, which matches the
standard aspect ratio of print paper.
• The letters “HDTV” stand for “High Definition Television”. An HDTV screen has an
aspect ratio of 16:9, which makes them wider than the usual 4:3 aspect ratio of
television screens of the past. Your camera can record images that are compatible
with the aspect ratio an HDTV screen.
• You should regard the print paper sizes suggested here as guidelines only (200 dpi
print resolution).
Image Size
(Pixels)
Suggested
Print Size and
Application
Description
12M
(4000x3000) Poster Print
Good detail for better clarity even for images
cropped (page 106) from the original
3:2
(4000x2656) Poster Print
16:9
(4000x2240) HDTV
8M
(3264x2448) A3 Print
Good detail
5M
(2560x1920) A4 Print
3M
(2048x1536) 3.5"x5" Print Best when preserving memory capacity is
relatively more important than image quality.
VGA
(640x480) E Mail
Image files are smaller, which is better when
attaching images to e-mail. However, images are
relatively coarser.
39 Snapshot Tutorial
.Specifying Movie Image Quality
Movie image quality is a standard that determines the detail, smoothness, and clarity
of a movie during playback. Shooting with the high-quality (WIDE) setting will result in
better image quality, but it also shortens the amount of time you can shoot.
1. In the REC mode, press [SET].
2. Use [8] and [2] to select the second Control Panel option from the top
(Movie Image Quality).
3. Use [4] and [6] to select the setting you want and then press [SET].
• The 16:9 aspect ratio is available only when “WIDE” is selected as the image
quality.
• Memory capacity (Movie recording time you can shoot) will be affected by the
quality settings you configure (page 174).
Image Quality (Pixels) Approximate Data Rate Frame Rate
WIDE 848x480 13 Megabits/second 30 frames/second
STD 640x480 10 Megabits/second 30 frames/second
LP 320x240 2.7 Megabits/second 15 frames/second
40 Snapshot Tutorial
1. In the REC mode, press [2] ( ) once.
2. Use [4] and [6] to select the flash
setting you want and then press [SET].
3. Press the shutter button to shoot.
• For information about Flash Range, see page 176.
Using Flash (Flash)
Auto Flash Flash fires automatically in accordance with exposure
(amount of light and brightness) conditions.
Flash Off Flash does not fire.
Flash On
Flash always fires. This setting can be used to brighten a
subject that normally comes out dark due to daylight or
backlight (daylight synchro flash).
Soft Flash Soft flash always fires, regardless of exposure conditions
Red Eye
Reduction
Flash fires automatically. This type of flash can be used to
reduce the chance of redness in the subject’s eyes.
Back lamp
Flashes orange while the flash is charging to indicate
that image recording is disabled.
• You will not be able to take another flash snapshot
until the lamp stops flashing orange, which indicates
that charging is complete.
< indicates the flash will fire.
Flash
[2] ( )
>
?
<
_
¥
41 Snapshot Tutorial
NOTE
• Take care so your fingers and the strap do not block the flash.
• The desired effect may not be obtained when the subject is too far away or too
close.
• Flash charging time (page 176) depends on operating conditions (battery
condition, ambient temperature, etc.).
• Shooting with flash turned off when lighting is dim results in a slow shutter speed,
which can cause image blur due to camera movement. Under such conditions,
secure the camera with a tripod, etc.
• With red eye reduction, the flash is fired automatically in accordance with
exposure. It does not fire in areas where lighting is bright.
• The presence of outdoor sunlight, fluorescent lighting, or some other light source
can cause abnormal image colors.
• Select ? (Flash Off) for the flash setting when shooting in areas where flash
photograph is prohibited.
Red-eye Reduction
Using the flash to shoot at night or in a dimly lit room can cause red spots inside the
eyes of people who are in the image. This is caused when the light from the flash
reflects off of the retina of the eye. When red-eye reduction is selected as the flash
mode, the camera fires a pre-flash to cause the irises in the eyes of any people in the
image to close, which reduces the chance of red eye. The camera also has an auto
red-eye correction feature that corrects for red-eye in recorded images.
Note the following important points when using red-eye reduction.
• Red-eye reduction does not work unless the people in the image are looking
directly at the camera (flash).
• Red-eye reduction may not work very well if the subjects are located far away from
the camera.
Other Useful Flash Features
• Changing the flash intensity (page 86)
42 Snapshot Tutorial
With the Self-timer, pressing the shutter button starts a timer. The shutter is released
and the image is shot after a fixed amount of time.
1. In the REC mode, press [SET].
2. Use [8] and [2] to select the fourth Control Panel option from the top
(Self-timer).
3. Use [4] and [6] to select the setting you want and then press [SET].
• The front lamp flashes while the Self-timer countdown is
in progress (Except when the REC Light is lit.).
• You can interrupt an ongoing Self-timer countdown by
pressing [SET].
NOTE
• The Self-timer cannot be used together with the following features.
Normal Speed CS, High Speed CS, some BEST SHOT scenes (Interval Snapshot,
Interval Movie, Prerecord (Movie), Voice Recording)
• The Triple Self-timer cannot be used together with the following features.
Auto Shutter, Movie, Make-up Mode, Landscape Mode, some BEST SHOT scenes
(Dynamic Photo, Multi-motion Image, For YouTube)
Using the Self-timer (Self-timer)
10 sec Self-timer 10-second Self-timer
2 sec Self-timer
2-second Self-timer
• When shooting under conditions that slow down the
shutter speed, you can use this setting to prevent
image blur due to camera movement.
X3 Self-timer
(Triple Self-timer)
Shoots three images: one image 10 seconds after the
shutter button is pressed, and the next two images as
soon as the camera is ready after shooting the previous
image. How long it takes for the camera to get ready to
shoot depends on the image size and quality settings,
whether or not a memory card is loaded in the camera,
and the flash charge condition.
Self-timer Off Turns off the Self-timer.
„
‚
”
Front lamp
B
43 Snapshot Tutorial
1. In the REC mode, press [SET].
2. Use [8] and [2] to select the fifth Control Panel option from the top
(AF Area).
3. Use [4] and [6] to select the setting you want and then press [SET].
4. Point the camera at the subject and half-press the shutter button. Wait
until the camera adjusts exposure and focus automatically.
5. Press the shutter button the rest of the way down.
Specifying the Auto Focus Area (AF Area)
Intelligent
The camera automatically determines the focus point on the
screen and focuses there when the shutter button is half-pressed
(intelligent AF).
Spot This mode takes readings of a small area in the center of the
image. This setting works well with focus lock (page 69).
Multi
When you half-press the shutter button while this setting selected,
the camera will select the optimum Auto Focus area from among
nine possible areas. The focus frame of the area where the
camera focuses will be displayed in green.
Tracking Half-pressing the shutter button focuses on the subject and
causes the focus frame to track the movement of the subject.
Ò
Û
È
Ë
44 Snapshot Tutorial
IMPORTANT!
• “È Multi” cannot be selected for the Auto Focus area while you are using Face
Detection (page 46).
• “Ë Tracking” cannot be selected for the Auto Focus area while you are using
Auto Shutter (page 73).
• Selecting “Ë Tracking” can cause vibration and noise to occur due to lens
operation while tracking a subject. This does not indicate malfunction.
“Û Spot” or “Ë Tracking”
“È Multi”
Focus frame
Focus frame
“Ò Intelligent”
Focus frame
45 Snapshot Tutorial
ISO sensitivity is a measure of sensitivity to light.
1. In the REC mode, press [SET].
2. Use [8] and [2] to select the sixth Control Panel option from the top
(ISO Sensitivity).
3. Use [4] and [6] to select the setting you want and then press [SET].
• “AUTO” ISO sensitivity always is applied for movies, regardless of the current
ISO sensitivity setting.
• Higher ISO sensitivity values tend to result in digital noise in images.
Specifying ISO Sensitivity (ISO)
AUTO Adjusts sensitivity automatically according to conditions
ISO 64 Lower sensitivity
Higher sensitivity
Slow shutter speed
Fast shutter speed
(Set for shooting in
dimly lit areas.)
Less noise
Some coarseness
(increased digital
noise)
ISO 100
ISO 200
ISO 400
ISO 800
ISO 1600
ISO 3200
46 Snapshot Tutorial
Selecting “On” causes the front lamp to turn on for illumination
when shooting under low lighting conditions.
1. In the REC mode, press [SET].
2. Use [8] and [2] to select the third Control Panel
option from the bottom (REC Light).
3. Use [4] and [6] to select “On” and then press [SET].
•y (REC Light) is displayed on the control panel while the REC Light is
enabled.
IMPORTANT!
• Never look directly into the front lamp while it is lit.
• Never aim the front lamp at a person who is operating a motor vehicle, etc.
• The effectiveness of the REC Light is reduced in the case of faraway subjects.
When shooting people, the face detection feature detects the faces of up to ten
individuals and adjusts focus and brightness accordingly.
1. In the REC mode, use [ in the control panel, 4] and [6] to display G
which enters the Face Detection.
• If G does not appear in the control panel, press [4 6] or [ ] many times until it
appears. Each press of [4] or [6] will cycle the control panel option in the
following sequence: Face Detection * Make-up Mode (page 48) *
Landscape Mode (page 49).
2. Press [SET] and then use [8] and [2] to select the second Control
Panel option from the bottom (Face Detection).
3. Use [4] and [6] to select “G Face Detection: On” and then press
[SET].
Shooting with the REC Light (REC Light)
Using Face Detection (Face Detection)
Front lamp
47 Snapshot Tutorial
4. Point the camera at the subject(s).
The camera will detect human faces and display a
frame around each one.
5. Half-press the shutter button.
The camera will focus and the frames around the
faces it focuses on will turn green.
6. Press the shutter button the rest of the way
down.
Tips for Best Face Detection Results
• The camera performs center focus if it cannot detect a face.
• Always make sure that Auto Focus (AF) is selected as the focus mode when
shooting with face detection.
• Face detection may take a bit longer when you hold the camera sideways.
• Detection of the following types of faces is not supported.
– Face that is obstructed by hair, sunglasses, a hat, etc., or a face in dark shade
– A profile or a face that is at an angle
– A face that is very far away and small, or very close and large
– A face in an area that is very dark
– The face of a pet or some other non-human subject
IMPORTANT!
• Face detection cannot be used in combination with any of the following features.
– Some BEST SHOT scenes (Dynamic Photo, Multi-motion Image, Prerecord
(Movie), For YouTube, Voice Recording)
– Movie Recording
• The following function is disabled when shooting with face detection.
– Multi AF
Face Detection icon
48 Snapshot Tutorial
The Make-up Mode smoothes the skin texture of the subject and softens facial
shadows caused by harsh sunlight for better looking portraits.
1. In the REC mode, use [4] and [6] to display
± in the control panel, which enters the
Make-up Mode.
• If ± does not appear in the control panel, press
[4] or [6] many times until it appears. Each press
of [4] or [6] will cycle the control panel option in
the following sequence: Face Detection (page 46)
* * Make-up Mode Landscape Mode (page
49).
2. Press [SET] and then use [8] and [2] to select the second Control
Panel option from the bottom (Make-up Mode).
3. Use [4] and [6] to select “Make-up Level”, and then
press [SET].
• You can set one of 13 levels in the range of “0 (Off)” (no
correction) to “+12 (Max.)” (maximum correction). The larger the value, the
greater the processing that is performed.
4. Point the camera at the subject(s).
The camera will detect human faces and display a frame around each one.
5. Half-press the shutter button.
The camera will focus on the face, which will cause frames around it to turn
green.
6. When you are ready to shoot, press the shutter button all the way
down.
NOTE
• The following functions cannot be used together with the Make-up Mode.
Continuous Shutter, Triple Self-timer, Face Detection, Landscape Mode, some
BEST SHOT scenes
Shooting with the Make-up Mode (Make-up)
Make-up icon
49 Snapshot Tutorial
The Landscape Mode makes colors more vivid, filters haze, and performs other
processing that enhances the beauty of natural scenery.
1. In the REC mode, use [4] and [6] to display
Ö in the control panel, which enters the
Landscape Mode.
• If Ö does not appear in the control panel, press
[4] or [6] many times until it appears. Each press
of [4] or [6] will cycle the control panel option in
the following sequence: Face Detection (page 46)
* * Make-up Mode (page 48) Landscape
Mode.
2. Press [SET] and then use [8] and [2] to select the second Control
Panel option from the bottom (Landscape Mode).
3. Use [4] and [6] to select the Landscape Mode setting
you want.
• Available level settings are “+1” (Weak) and “+2” (Strong).
4. When everything is the way you want, press [SET].
This will apply the effect you selected.
5. Point the camera at the scenery you want to record.
6. Press the shutter button to shoot.
NOTE
• The following functions are disabled while the camera is in the Landscape Mode:
Continuous Shutter (CS), Triple Self-timer, Make-up Mode, Face Detection,
Lighting, Color Filter, Sharpness, Saturation, Contrast, some BEST SHOT scenes
Shooting Beautiful Scenery Images (Landscape)
Vivid Landscape Enhances colors to produce a clearer, more vivid
landscape image.
Mist Removal Corrects for misty and cloudy conditions for scenery
images that appear as if they were shot on a clear day.
Landscape icon
50 Snapshot Tutorial
1. In the REC mode, press [SET].
2. Use [8] and [2] to select the bottom Control Panel option (Date/Time).
Use [4] and [6] to select the date or time.
NOTE
• You can select either of two display style (page 143) for the date: Month/Day or
Day/Month.
• The time is displayed using 24-hour format.
Your camera provides you with 3X optical zoom (that changes the lens focal
distance), which can be used in combination with digital zoom (that digitally
processes the center portion of the image to enlarge it) for total zoom capabilities of
3X to 47.8X. The image deterioration point depends on the image size (page 52).
1. In the REC mode, press the zoom button to zoom.
2. Press the shutter button to shoot the image.
IMPORTANT!
• Digital zoom is disabled while date stamping (page 142) is turned on.
Changing the Control Panel Date/Time Style
Shooting with Zoom
z (Telephoto) : Enlarges the subject and narrows the range
w (Wide Angle) : Reduces the size of the subject and broadens the range
w z Wide Angle Telephoto Zoom button
51 Snapshot Tutorial
NOTE
• The higher the digital zoom factor, the coarser the recorded image. Note that the
camera also has a function that lets you record using digital zoom without image
deterioration (page 52).
• Use of a tripod is recommended to protect against image blur due to camera
movement when shooting with telephoto.
• Performing a zoom operation changes the lens aperture.
If you hold down the z (Telephoto) side of the zoom button, the zoom operation will
stop when the optical zoom factor reaches its maximum. Momentarily releasing the
zoom button and then holding down its z (Telephoto) side will switch to digital
zoom, which you can use to set an even higher zoom factor.
• During zoom, a zoom bar on the monitor screen shows the current zoom setting.
Optical Zoom and Digital Zoom Switch Point
Image deterioration indicator
Zoom bar
Focusing range
(Displayed for Auto Focus, Macro Focus, and Manual
Focus.)
3X to 18.7X
Undeteriorated image
quality range
1X 12X to 47.8X
Zoom pointer (Indicates current zoom.)
Image deterioration
Optical/digital zoom switch point
*3X optical zoom point
Deteriorated image
quality range
52 Snapshot Tutorial
• The image deterioration point depends
on the image size (page 36). The smaller
the image size, the higher the zoom
factor you can use before reaching the
image deterioration point.
• Though digital zoom generally causes a
deterioration of image quality, some
digital zoom without image deterioration
is possible with image sizes of “8M” and
smaller. The range in which you can use
digital zoom without image deterioration
is indicated on the display. The
deterioration point depends on the image
size.
Image
Size
Maximum
Zoom
Factor
Undeterio-
rated zoom
limit
12M 12X 3X
3:2 12X 3X
16:9 12X 3X
8M 14.7X 3.7X
5M 18.7X 4.7X
3M 23.4X 5.9X
VGA 47.8X 18.7X
53 Recording Movie Images and Audio
Recording Movie Images and Audio
1. Configure the quality setting for the movie (page 39).
The length of the movie you can record will depend on the quality setting you
select.
2. In the REC mode, press [0]
(Movie).
This will start recording and display Y
on the monitor screen.
Movie recording includes monaural
audio.
• You can disable audio recording, if
you want (page 73).
3. Press [0] again to stop recording.
Movie recording also will stop
automatically if memory becomes full
before you press [0].
• The maximum size allowed for a single movie file is 4GB. Movie recording
stops automatically when a file becomes 4GB.
Shooting with BEST SHOT
With BEST SHOT (page 58), you can select the sample scene that matches the type
of movie you are trying to shoot and the camera will change its setup accordingly, for
beautiful movies every time. Selecting the BEST SHOT scene named Night Scene,
for example, will configure the camera so night scenes appear clearer and brighter.
Minimizing the Effects of Camera Movement during Movie Recording
You can configure the camera to minimize the effects of camera movement during
movie recording (page 77). Note, however, that this does not prevent image blur due
to subject movement and it makes the field of view narrower.
To record a movie
Recording time
Remaining recording time
(page 174)
[0] (Movie)
54 Recording Movie Images and Audio
NOTE
• Spending a long time using movie recording will cause the camera to become
slightly warm to the touch. This is normal and does not indicate malfunction.
• The camera also records audio. Note the following points when
shooting a movie.
– Take care that the microphone is not blocked by your fingers,
etc.
– Good recording results are not possible when the camera is
too far away from what you are trying to record.
– Operating camera buttons while shooting can cause button
noise to be picked up in the audio.
• Shooting a very bright subject can cause a vertical band or a pink cast on the
monitor screen image. This does not indicate malfunction.
• Use of certain types of memory cards increase the time it takes to record movies,
which can cause movie frames to be lost. This condition is indicated by » and Y
flashing on the monitor screen. To avoid loss of movie frames, use of a memory
card with a maximum transfer speed of at least 10MB per second is recommended
(page 161).
• The effects of camera movement in an image become more pronounced when you
shoot close up or with a large zoom factor. Because of this, use of a tripod is
recommended under these conditions.
• Auto Focus and Macro Focus become fixed focus while shooting a movie (page
67).
Microphone
55 Recording Movie Images and Audio
With this feature, the camera prerecords up to four seconds of whatever is happening
in front of the lens in a buffer that is continually updated. Pressing [0] saves the
prerecorded action (buffer contents) followed by real-time recording. Real-time
recording continues until you stop it.
.To set up the camera to shoot with Prerecord Movie
1. In the REC mode, press [BS].
2. Use [8], [ ], [2 4], and [6] to select the “Prerecord (Movie)” scene and
then press [SET].
This causes ‰ to appear on the monitor screen.
.To shoot a Prerecord Movie
1. With the camera pointed at the subject, press [0].
This will save four seconds of action prerecorded in the buffer and start real-time
recording.
2. Press [0] again to stop recording.
• To turn off Prerecord Movie, press [BS] and then select (Auto).R
Using Prerecord Movie
[ ]0
Movie
Recording start
4-second prerecorded part (from the buffer)
[ ]0
Recording end
56 Recording Movie Images and Audio
1. While a movie is being recorded, press the shutter button.
Movie recording continues after the snapshot is recorded.
NOTE
• You can use [2] ( ) while shooting a movie to change the flash mode setting.
• Movie recording is interrupted for a few seconds at the point where a snapshot is
recorded.
• Shooting a snapshot during movie recording is not possible while any one of the
following BEST SHOT scenes is selected.
Prerecord (Movie), Dynamic Photo, Multi-motion Image, For YouTube, Voice
Recording
Voice Recording lets you record audio only, without a snapshot or movie.
• For information about Voice Recording capacities, see page 174.
1. In the REC mode, press [BS].
2. Use [8], [2], [4], and [6] to select the “Voice Recording” scene and
then press [SET].
This causes ` to appear on the monitor screen.
3. Press the shutter button to start recording.
• The back lamp flashes green while recording is in
progress.
• Pressing [SET] during recording will insert a
marker into the recording. During playback, you
will be able to jump to the markers in the recording.
4. Press the shutter button again to stop audio
recording.
• To create another audio recording file, repeat
steps 3 and 4.
• To turn off Voice Recording, press [BS] and then
select R (Auto).
Shooting a Snapshot while Shooting a Movie
Recording Audio Only (Voice Recording)
Recording time
Remaining recording
time
57 Recording Movie Images and Audio
NOTE
• You can use [8] (DISP) during audio recording to toggle the monitor screen on
and off.
• When monitor screen contents are turned off, selecting the “Voice Recording”
scene will cause the monitor screen to turn off immediately (page 148).
About audio data
• Audio files can be played back on a computer with Windows Media Player or
QuickTime.
– Audio Data: WAVE/IMA-ADPCM (WAV extension)
1. In the PLAY mode, use [4] and [6] to display
the Voice Recording file you want to play.
` is displayed in place of an image for a Voice
Recording file.
2. Press [SET] to start playback.
Voice Recording Playback Controls
To play back an audio recording
Fast forward/fast reverse [ ]4] [6
Play/pause [SET]
Jump to marker
While playback is paused, press [
4 6] or [ ] to
jump to the next marker and then press [SET] to
resume playback.
Volume adjustment Press [2] and then press [8] [2]
Monitor screen on/off [8] (DISP)
Playback end [MENU]
58 Using BEST SHOT
Using BEST SHOT
BEST SHOT provides you with a collection of sample “scenes” that show a variety of
different types of shooting conditions. When you need to change the setup of the
camera, simply find the scene that matches what you are trying to achieve, and the
camera sets up for it automatically. This helps to minimize the chance of ruined
images due to poor exposure and shutter speed settings.
1. In the REC mode, press [BS].
This will display a menu of BEST SHOT scenes.
• The initial default selection is R (Auto).
2. Use [8], [2], [4], and [6] to move the
boundary to the scene you want to select.
• The scene menu has multiple pages. Use [8]
and [2] to scroll between menu pages.
• You can access information about the currently
selected scene. See page 59 for details.
• To return to normal snapshot recording, select
Scene 1 R (Auto). Pressing [MENU] while the
scene selection screen or scene information
screen is displayed will cause the boundary to
jump directly to R (Auto).
What is BEST SHOT?
Some Sample Scenes
Portrait Scenery Night Scene Night Scene Portrait
To shoot an image with BEST SHOT
Currently selected scene
(with boundary)
Scene number
Scene name
[BS]
59 Using BEST SHOT
3. Press [SET] to configure the camera with the settings for the currently
selected scene.
This returns to the REC mode.
• The settings of the scene you selected remain in effect until you select a
different scene.
• To select a different BEST SHOT scene, repeat the above procedure from
step 1.
4. Press the shutter button (if you are shooting a snapshot) or [0] (if you
are shooting a movie).
NOTE
• The BEST SHOT YouTube scene sets up the camera for recording movies that are
optimized for uploading to YouTube. Movies recorded with the YouTube scene are
stored in a special folder to make them easy to locate for uploading (page 137).
Maximum recording time while the YouTube scene is selected is 10 minutes.
.Using Scene Information Screen
To find out more about a scene, select it with the boundary
on the scene selection screen, and then press the zoom
button.
• To return to the scene menu, press the zoom button again.
• To scroll between scenes, use [
4 6] and [ ].
• To configure the camera with the settings for the currently
selected scene, press [SET]. To return to the scene
information screen for the currently selected BEST SHOT scene, press [BS].
60 Using BEST SHOT
.BEST SHOT Precautions
• The following BEST SHOT scenes cannot be used while recording a movie:
Dynamic Photo, Multi-motion Image
• The following BEST SHOT scene cannot be used while shooting a snapshot:
Prerecord (Movie), For YouTube.
• The Voice Recording scene cannot be used while shooting a snapshot or recording
a movie.
• Some scenes like Night Scene and Fireworks results in a slow shutter speed
setting. Since a slow shutter speed increases the chance of digital noise in the
image, the camera automatically performs a digital noise reduction process when
either of these scenes is selected. This means that it will take a bit longer for the
image to be saved which is indicated by the back lamp flashing green. Do not
perform any key operation during that time. Also, it is a good idea to use a tripod to
avoid image blur due to camera movement when shooting at slow shutter speeds.
• Your camera includes a sample scene that optimizes settings for auction site
images. Depending on your camera model, the sample scene is named either “For
eBay” or “Auction”. Images you record using the auction site sample scene are
stored in a special folder so you can easily find them on your computer (page 137).
• BEST SHOT scene images were not shot using this camera.
• Images shot using a BEST SHOT scene may not produce the results you expected
due to shooting conditions and other factors.
• You can modify the camera settings that are made after you select a BEST SHOT
scene. Note, however, that the BEST SHOT settings revert to their defaults when
you select another BEST SHOT scene or turn off the camera.
61 Using BEST SHOT
You can save up to 999 camera setups as user BEST SHOT scenes for instant recall
whenever you need them.
1. On the BEST SHOT scene menu, select the scene named BEST SHOT
(Register User Scene).
2. Use [4] and [6] to select the snapshot or movie whose setup you want
to save.
3. Use [8] and [2] to select “Save”, and then press [SET].
Your BEST SHOT scene will be assigned the name “Recall User Scene”, along
with a scene number.
NOTE
• BEST SHOT snapshot scenes can be used for snapshots only and movie scenes
can be used for movies only.
• You can check the settings of the currently selected BEST SHOT scene by
displaying the camera’s setting menus and looking at its settings.
• User snapshot scenes are assigned numbers in the sequence: SU1, SU2, and so
on, while movies are assigned numbers in the sequence: MU1, MU2, and so on.
• The following are the settings that are saved for each user snapshot BEST SHOT
scene.
Face Detection, Focus, EV Shift, White Balance, Flash, ISO, Metering, Lighting,
Make-up Mode, Landscape Mode, Flash Intensity, Color Filter, Sharpness,
Saturation, Contrast
• The following are the settings that are saved for each user movie BEST SHOT
scene.
Focus, EV Shift, White Balance, Color Filter, Sharpness, Saturation, Contrast
• User BEST SHOT scenes are stored in built-in memory (page 137) in the SCENE
folder (snapshots) or MSCENE folder (movies).
• Formatting the camera’s built-in memory (page 147) deletes all user BEST SHOT
scenes.
• Use the following procedure when you want to delete a user BEST SHOT scene.
1Display the information screen (page 59) of the user BEST SHOT scene you
want to delete.
2Press [2] ( ), select “Delete”, and then press [SET].
Creating Your Own BEST SHOT Setups
62 Using BEST SHOT
With AUTO BEST SHOT, the camera automatically selects the BEST SHOT scene
that suits your subject and shooting conditions, and configures its settings
accordingly. The following are the scenes selected automatically by AUTO BEST
SHOT.
Portrait, Scenery, Night Scene, Night Scene Portrait, Macro, Sports, etc.
1. Press [BS] and then select the “AUTO BEST SHOT” scene.
2. Point the camera at the subject.
The camera will automatically select the BEST
SHOT scene that suits your subject and shooting
conditions, and configure its settings accordingly. If
shooting conditions change, the camera may change
to a different BEST SHOT scene automatically.
• The camera will display the scene selected on the
monitor screen for a few seconds.
3. Press the shutter button to shoot the image.
• The AUTO BEST SHOT will remain activated, so the camera will select a
BEST SHOT scene for the next shot after image recording is complete.
IMPORTANT!
• Certain subjects and/or shooting conditions can make it impossible for the camera
to select an appropriate scene.
• Shooting with AUTO BEST SHOT can cause vibration and noise to occur due to
lens operation. This does not indicate malfunction.
Shooting with AUTO BEST SHOT
AUTO BEST SHOT icon
63 Using BEST SHOT
You can configure the camera to repeatedly shoot snapshots or movies automatically
at regular intervals.
1. Press [BS] and then select the “Interval Snapshot” or “Interval Movie”
scene.
2. Press [SET].
3. Use [4] and [6] to select the “Interval” setting
you want and then press [SET].
• This setting specifies the interval between shots.
You can specify one of the following intervals:
10 seconds, 30 seconds, 1 minute, 3 minutes.
4. Use [4] and [6] to select the “Time” setting you want and then press
[SET].
• This setting specifies the shooting time. You can specify one of the following
times: 3 minutes, 10 minutes, 20 minutes, 30 minutes.
5. Press [SET] again, and then use [8] and [2] to specify whether the
monitor screen should be on (On) or off (Off) during interval shooting,
and then press [SET].
6. After configuring all the settings, use [8] and [2] to select “Apply”
and then press [SET].
7. Align the focus frame with the subject, and then press the shutter
button.
• This starts interval recording in accordance with your settings.
Automatically Shooting at Regular Intervals (Interval)
64 Using BEST SHOT
IMPORTANT!
• When the “Interval Movie” scene is selected, the shooting time setting is fixed at
5 seconds.
• The sleep (page 144) and Auto Power Off (page 145) are disabled while an interval
shooting operation is in progress.
• Pressing any of the camera’s buttons while an interval shooting operation is in
progress will cause the message “Interval shooting cancelled.” to appear and the
interval operation will be canceled.
• The interval setting is the time from when the last shooting operation was complete
until the next shooting operation starts. Certain camera settings and/or shooting
conditions may cause the actual interval and shooting time to be somewhat
different from those you specify.
• Shooting conditions can make it impossible to shoot the specified number of
images.
Multi-motion Image can be used to isolate a moving subject
within a series of multiple images and places them against
a stationary background. Make sure that the camera is not
moving or shaking when shooting with Multi-motion Image.
1. Press [BS] and then select the “Multi-motion
Image” scene.
2. Press the shutter button to start shooting.
Continuous Shutter shooting will stop after some time, and the resulting
composite image will appear on the monitor screen.
• Keep the camera still until all of the continuous shutter images are recorded.
• When using this feature, image size is fixed at 3M (2048
x1536 pixels).
IMPORTANT!
• When shooting under bright conditions, the resulting image may appear brighter
than when shooting a normal snapshot.
Isolating Moving Subjects (Multi-motion Image)
65 Advanced Settings
Advanced Settings
The following are menu operations you can use to configure various camera settings.
• You also can use the Control Panel (page 35) to configure some of the settings that
appear on the menu screen. Refer to the page references provided in this section
for information about configuring settings using the Control Panel.
.Example Menu Screen Operation
Press [MENU] to display the menu screen.
• Menu contents are different in the REC mode and PLAY mode.
Menu Screen Operation Buttons
1. In the REC mode, press [MENU].
This will display the menu screen.
2. Use [4] and [6] to select the tab where the item you want to configure
is located.
Using On-screen Menus
[ ]4] [6Selects tabs. [6] is also used to display the options available for a
setting.
[ ]8] [2Selects a setting option.
[SET] Registers the selected setting.
[MENU] Exits the menu screen.
Example: REC mode menu
[MENU] [SET]
[ ]8] [2] [4] [6
66 Advanced Settings
3. Use [8] and [2] to select the menu item you
want, and then press [6].
4. Use [8] and [2] to change the setting.
5. After the setting is the way you want, press
[SET].
• Pressing [ ] registers the selected setting and 4
returns to the menu.
• To configure settings on another tab after
pressing [4 8] to return to the menu, use [ ] to
move the highlighting up to the tabs, and then use
[4 6] and [ ] to select the tab you want.
.Menu Operations in This Manual
Menu operations are represented in this manual as shown below. The following
operation is the same one described under “Example Menu Screen Operation” on
page 65.
Settings
Example:
When “Focus” is selected
on the “REC” tab
Tabs
Procedure
REC mode
*
[MENU]
*
REC Tab
*
Focus
Use [4] and [6] to select the “REC” tab.
Use [8] and [2] to select the “Focus” and
then press [6].
Press
[MENU].
Press
[ON/OFF]
(Power)
67 Advanced Settings
Procedure
REC mode * [MENU] * REC Tab * Focus
*1 The focus range is the distance from the lens surface.
*2 The minimum changes along with the optical zoom setting.
*3 The distance depends on shooting conditions, and appears on the monitor screen
when the shutter button is half-pressed.
REC Mode Settings (REC)
Selecting a Focus Mode (Focus)
Settings Type of Shot Focus Mode Approximate Focus
Range*1
Snapshot SnapshotMovies Movies
Q Auto
Focus General recording Automatic
Fixed
focal
point
Approximately
10 cm to 9
(infinity)
(3.9" to 9)
Fixed
distance
*2, *4
´ Macro Close ups Automatic
Approximately
10 cm to 50 cm
(3.9" to 19.7")
E
Pan
Focus
Shooting with a
relatively wide
focus range
Fixed
focal point
Fixed
distance
*2, *3
) Infinity Scenery and other
distant subjects Fixed Infinity
W Manual
Focus
When you want to
focus manually Manual Approximately 10 cm to
9 (infinity)*2 (3.9" to 9)
68 Advanced Settings
*4 (m)
NOTE
• Above values are for reference only.
For movie macro, the focus range is a few centimeters within the center distance.
Normal Macro
Zoom Steps Close Up Telephoto Center distance
Z1 (Wide) Approx. 0.4 (1.3') 90.20 (7.9")
2 Approx. 0.5 (1.6') 90.30 (11.8")
3 Approx. 0.6 (2.0') 90.40 (15.7")
4 Approx. 0.7 (2.3') 90.45 (17.7")
5 Approx. 0.8 (2.6') 90.40 (15.7")
6 Approx. 0.9 (3.0') 90.40 (15.7")
7 Approx. 1.1 (3.6') 90.50 (19.7")
8 Approx. 1.2 (3.9') 90.50 (19.7")
9 Approx. 1.4 (4.6') 90.50 (19.7")
10 Approx. 1.6 (5.2') 90.60 (23.6")
11 Approx. 2.0 (6.6') 90.60 (23.6")
12 Approx. 2.2 (7.2') 90.60 (23.6")
13 (Tele) Approx. 2.5 (8.2') 90.60 (23.6")
69 Advanced Settings
To focus with manual focus
1. On the monitor screen, compose the image so
the subject you want to focus on is within the
yellow boundary.
2. Watching the image on the monitor screen use
[4] and [6] to adjust focus.
• At this time the image that is within the boundary will
enlarge and fill the monitor screen, which aids in
focusing. If you do not perform any operation for two
seconds while the enlarged image is displayed, the
screen in step 1 will re-appear.
NOTE
• An Auto Macro feature detects how far the subject is from the lens and
automatically selects either Macro Focus or Auto Focus accordingly.
• Use of the flash together with Macro Focus can cause the light of the flash to
become blocked, which may result in unwanted lens shadows in your image.
• Auto Macro can be used when recording snapshots only.
• Whenever you perform an optical zoom operation while shooting with Auto Focus,
Macro Focus, or Manual Focus, a value will appear on the monitor screen to tell
you the focus range, as shown below.
Example: oo cm to 9
*oo is the actual focusing range value.
Using Focus Lock
“Focus lock” is a technique you can use when you want
to compose an image in which the subject you want to
focus on is not within the focus frame in the center of the
screen.
• To use focus lock, select “Û Spot” for the Auto
Focus area (page 43).
1. Align the monitor screen’s focus frame with
the subject you want to focus on and then
half-press the shutter button.
Yellow boundary
Subject to be focused on
Focus frame
70 Advanced Settings
2. Keeping the shutter button half-pressed (which
maintains the focus setting), move the camera
to compose the image.
3. When you are ready to shoot the image, press
the shutter button the rest of the way down.
NOTE
• Focus lock also locks exposure (AE).
Procedure
REC mode * [MENU] * REC Tab * CS
Your camera has two continuous shutter modes. Images continue to be shot as long
as you keep the shutter button depressed. Releasing the shutter button stops
shooting.
• To turn off a continuous shutter mode, select “Off”.
Using Continuous Shutter (CS)
CS speed Maximum CS
Shots
Recorded Image
Size Flash Mode
Normal Speed CS
Depends on
memory card
capacity
Until memory full According to
image size setting
According to flash
mode setting
High Speed CS
3 images per
second 8 shots 2M (1600x1200
pixels) fixed Flash Off
71 Advanced Settings
.Specifying the Method for Saving Continuous Shutter Images
Specify the method to use for saving images recorded with “High Speed CS”.
1. After continuous shutter shooting is finished, use [8] and [2] to
select the save method you want and then press [SET].
• Does not save any of the images while “Cancel Save” is selected.
Save Selected
The shot images are played back at slow speed so you can select the images
you want to save.
1While the shot images are playing back and an image
appears that you want to save, press the shutter
button. Each image that you select by pressing the
shutter button will have a mark appended to it.
2After selecting all of the images you want to save,
press [MENU].
3Use [8] and [2] to select the save method you want and then press [SET].
Save All
Saves all the images.
Mark
Buttons Used for Image Selection
[ ]4] [6
During playback, changes the playback direction and playback
speed.
While playback is paused, scrolls forward or back.
[SET] Toggles between pause and play.
Shutter
button Press all the way down to select an image for saving.
[MENU] Saves the selected images and exits the image select
operation.
Save Selected : Saves selected images.
Save All : Saves all the images.
Cancel Save : Does not save any of the images.
72 Advanced Settings
IMPORTANT!
• If there is not enough available capacity on the memory card, you may not be able
to record the number of CS images indicated on the monitor screen. Make sure
your memory card has sufficient remaining capacity before shooting with using
continuous shutter.
• With continuous shutter, exposure and focus for the first image are applied for
successive images as well.
• When using a continuous shutter mode, keep the camera still until shooting is
finished.
• Continuous shutter cannot be used in combination with any of the following.
– Some BEST SHOT scenes (AUTO BEST SHOT, Dynamic Photo, Interval
Snapshot, Interval Movie, Underwater, Multi-motion Image, Prerecord (Movie),
For YouTube, Voice Recording)
– Make-up Mode, Landscape Mode
• The speed of “Normal Speed CS” depends on the type of memory card loaded in
the camera and the amount of free space available for storage. When shooting to
built-in memory, continuous shutter shooting is relatively slow.
• “Normal Speed CS” speed is slower when shooting with flash.
• You cannot use the self-timer in combination with “Normal Speed CS” and “High
Speed CS”.
• Note that images recorded with “High Speed CS” are of somewhat lower resolution
and more prone to digital noise than images recorded with “Normal Speed CS”.
• The ISO sensitivity setting always is “AUTO” for “High Speed CS”, regardless of
the camera’s current ISO sensitivity setting.
• Shooting a very bright subject can cause a vertical band or a pink cast on the
monitor screen image. This does not indicate malfunction.
Procedure
REC mode * [MENU] * REC Tab * Self-timer
For details, see the Control Panel procedure on page 42.
Using the Self-timer (Self-timer)
73 Advanced Settings
Procedure
REC mode * [MENU] * REC Tab * REC Light
For details, see the Control Panel procedure on page 46.
Procedure
REC mode * [MENU] * REC Tab * Movie Audio
Selecting “On” enables audio recording (monaural) during movie recording. Selecting
“Off” disables audio recording.
• In a shooting environment where there is too much noise due to vibration, select
“Off” for movie audio recording.
Procedure
REC mode * [MENU] * REC Tab * Auto Shutter
With Auto Shutter, the camera releases the shutter automatically when it detects that
certain conditions are present.
Shooting with the REC Light (REC Light)
Turning Movie Audio Recording On or Off (Movie Audio)
Using Auto Shutter (Auto Shutter)
Detect Blur
Camera releases the shutter automatically when it detects
image blur to camera and subject movement are
minimized.
Detect Panning
When panning, the camera releases the shutter
automatically when it determines there is no blur in the
subject being followed.
Detect Smile Camera releases the shutter automatically when it detects
the subject is smiling.
¸
¯
¨
74 Advanced Settings
.To use Detect Blur to minimize image blur (Detect Blur)
1. Point the camera at the subject and half-press the shutter button. Wait
until the camera adjusts exposure and focus automatically.
2. Press the shutter button the rest of the way
down.
The camera will go into a standby mode and start
detecting hand and subject movement. The camera
will release the shutter automatically the moment it
determines there is no image blur.
• “0 Auto” flashes on the monitor screen while
detection of image blur due to hand movement or
subject movement is in progress.
.To use Detect Panning to minimize image blur (Detect Panning)
1. Point the camera at location where the subject will pass and then half-
press the shutter button to adjust exposure and focus.
2. Press the shutter button the rest of the way
down.
This will put the camera into Auto Shutter standby.
Move the camera to follow the movement of the
subject. The camera will release the shutter
automatically the moment it determines there is no blur
in the subject you are following.
• “0 Auto” flashes on the monitor screen while
panning detection is in progress.
Indicator:
The indicator color
changes from red to
green when the camera
is getting ready to
release the shutter.
Indicator:
The indicator color
changes from red to
green when the camera
is getting ready to
release the shutter.
75 Advanced Settings
. To use Detect Smile to record when a subject is smiling
(Detect Smile)
1. Point the camera at the subject and half-press the shutter button. Wait
until the camera adjusts exposure and focus automatically.
2. Press the shutter button the rest of the way
down.
The camera will go into a standby mode and start
detecting whether the subject is smiling. The camera
will release the shutter automatically the moment it
determines the subject is smiling.
• “0 Auto” flashes on the monitor screen while smile
detection is in progress.
. To change Auto Shutter trigger sensitivity (Sensitivity)
1. Use [8] and [2] to select “Sensitivity” and then press [6].
2. Use [4] and [6] to select the sensitivity setting you want, and then
press [SET].
• You can select any one of three sensitivity levels, from ø (Lowest) to
œ (Highest).
• With the œ (Highest) setting, the auto shutter release is triggered relatively
easily. Auto shutter release triggering becomes more difficult with the ø
(Lowest) setting, but recorded images have the least blur. Experiment with
Auto Shutter trigger sensitivity settings to find the one that work best for you.
. Using Auto Shutter in Combination with Continuous Shutter
When shooting in combination with Continuous Shutter (page 70), the camera will go
back into Auto Shutter standby after shooting of the CS images is complete, so it will
be ready to shoot again. To stop an ongoing Continuous Shutter operation, wait until
“0 Auto” is flashing on the monitor screen, and then press [SET].
Indicator:
The indicator color
changes from red to
green when the
camera is getting ready
to release the shutter.
76 Advanced Settings
Tips for Better Auto Shutter Snapshots
• Using Auto Shutter in combination with Anti Shake (page 77) reduces the chance
of image blur even more.
• While recording with Detect Blur or Detect Smile, keep the camera as still as
possible until the recording operation is complete.
IMPORTANT!
• If the camera remains in Auto Shutter standby without releasing the shutter, you
can record an image by pressing the shutter button all the way down again.
• Detect Blur and Detect Panning may not produce the desired effect when shooting
in an area where dim lighting requires a slow shutter speed, or when the subject is
moving extremely quickly.
• Since facial expressions differ from individual to individual, you may experience
problems with getting the camera to release the shutter while Detect Smile is being
used. If this happens, change the trigger sensitivity setting.
• The Auto Power Off (page 145) trigger time is fixed at five minutes while the
camera is in Auto Shutter standby. Sleep (page 144) is disabled while Auto Shutter
being used.
• To cancel Auto Shutter recording while Auto Shutter is being performed (indicated
by “0 Auto” flashing on the monitor screen), press [SET].
• The “Ë Tracking” setting for the AF area cannot be used while Detect Blur or
Detect Panning is selected for the Auto Shutter setting (page 43).
• Always make sure you had “Û Spot” selected for the AF area whenever you are
using the Detect Smile Auto Shutter setting (page 43).
• Auto Shutter cannot be used in combination with any of the following features.
– Some BEST SHOT sample scenes (AUTO BEST SHOT, Dynamic Photo,
Interval Snapshot, Interval Movie, Multi-motion Image, Prerecord (Movie), For
YouTube, Voice Recording)
• The following function is disabled when shooting with Auto Shutter.
– Triple Self-timer
77 Advanced Settings
Procedure
REC mode * [MENU] * REC Tab * Face Detection
For details, see the Control Panel procedure on page 46.
Procedure
REC mode * [MENU] * REC Tab * Anti Shake
You can turn on the camera’s Anti Shake feature to reduce image blur due to subject
movement when shooting a moving subject using telephoto, when shooting a fast-
moving subject, or when shooting under dim lighting conditions.
NOTE
• ISO sensitivity, aperture, and shutter speed do not appear on the monitor screen
when you half-press the shutter button while “Auto” is selected. These values will
appear briefly, however, in the preview image that is displayed immediately after
you shoot a snapshot.
• If the flash fires, the Anti Shake icon S will remain on the display, even though
Anti Shake does not function during flash photography.
• Shooting with Anti Shake can cause an image to appear somewhat coarser than
normal and can cause slight deterioration of image resolution.
• Anti Shake may not be able to eliminate the effects of subject movement when
movement is severe.
Procedure
REC mode * [MENU] * REC Tab * AF Area
For details, see the Control Panel procedure on page 43.
Shooting with Face Detection (Face Detection)
Reducing the Effects of Subject Movement (Anti Shake)
Auto Minimizes the effects of subject movement.
Off Turns off Anti Shake.
Specifying the Auto Focus Area (AF Area)
78 Advanced Settings
Procedure
REC mode * [MENU] * REC Tab * AF Assist Light
Half-pressing the shutter button while this setting is selected
causes the front lamp to light, illumination for which provides
focusing in areas where lighting is dim. Leaving this function
turned off is recommended when shoot portraits from short
distances, etc.
IMPORTANT!
• Never look directly into the front lamp while it is lit.
Procedure
REC mode * [MENU] * REC Tab * Focus Frame
You can use this procedure to select from among five different shapes, including a
heart shape, for the focus frame.
NOTE
• Half-pressing the shutter button will cause the focus frame to change one of the
shapes shown below.
• While “Random” is selected, one of the four focus frames is selected randomly
whenever the camera is turned on.
• When shooting with face detection, the frame shape is ß.
• The on-screen grid (page 80) will not appear when “ Multi” is selected as the È
AF area (page 43) while any focus frame other than ß is selected with this setting.
Using the Auto Focus Assist Light (AF Assist Light)
Changing the Focus Frame Shape (Focus Frame)
Settings ß ¹ ™ ¬ μ
Random
Focus successful
Focus not successful
Front lamp
79 Advanced Settings
Procedure
REC mode * [MENU] * REC Tab * Digital Zoom
You can use this setting to turn digital zoom on or off. When digital zoom is turned off,
operating the zoom button zooms the image with optical zoom only.
Procedure
REC mode * [MENU] * REC Tab * Quick Shutter
When Quick Shutter is turned on, you can press the shutter button all the way without
waiting for Auto Focus. This will record the image using a high-speed focus operation
that is much faster than Auto Focus.
NOTE
• Quick Shutter is disabled when the zoom factor is greater. Recording is performed
using Auto Focus at this time.
Turning Digital Zoom On or Off (Digital Zoom)
Shooting with Quick Shutter (Quick Shutter)
On Turns on Quick Shutter.
• Some images may be out of focus when Quick Shutter is used.
Off
Turns off Quick Shutter so focus is performed using normal Auto Focus
before the image is recorded.
• If you press fully the shutter button while Quick Shutter is turned off,
images will continue to be shot without focusing.
• Whenever possible, take a little extra time to half-press the shutter button
in order to ensure proper focus.
80 Advanced Settings
Procedure
REC mode * [MENU] * REC Tab * Grid
The on-screen grid can be displayed on the REC mode
monitor screen for easy vertical and horizontal alignment
when composing images.
Procedure
REC mode * [MENU] * REC Tab * Review
While Review is turned on, the camera will display a image for about one second
immediately after you press the shutter button to record it.
Procedure
REC mode * [MENU] * REC Tab * Icon Help
While Icon Help is turned on, a textual description will appear on the display for
certain icons when you switch between REC functions.
Functions Supported by Icon Help
• REC Mode, Flash, Metering Mode, White Balance, Self-timer, EV Shift
Displaying the On-screen Grid (Grid)
Turning on Image Review (Review)
Using Icon Help (Icon Help)
81 Advanced Settings
Procedure
REC mode * [MENU] * REC Tab * Memory
When you turn off the camera, it remembers the current settings of all enabled
memory items and restores them when you turn it back on. Any memory item that is
disabled will be returned to its initial default setting whenever you turn off the camera.
*Optical zoom setting only.
• If you turn the camera power off and then back on while the BEST SHOT memory
item is enabled, all of the other memory items (except for zoom position) are
initialized to the currently selected BEST SHOT sample scene setup, regardless of
the enabled/disabled status of the other memory items.
Configuring Power On Default Settings (Memory)
Setting Disabled (Initial Default Setting) Enabled
b BEST SHOT Snapshot (Auto)
Setting at
power off
Auto Shutter Off
Flash Auto
Focus AF (Auto Focus)
White Balance Auto
ISO Auto
AF Area Spot
Metering Multi
CS Off
Self-timer Off
Flash Intensity 0
Digital Zoom On
MF Position Position before manual focus was selected.
Zoom Position *Full wide
82 Advanced Settings
Procedure
REC mode * [MENU] * Quality Tab * Size
For details, see the Control Panel procedure on page 38.
Procedure
REC mode * [MENU] * Quality Tab * T Quality
• The “Fine” setting helps to bring out details when shooting a finely detailed image
of nature that includes dense tree branches or leaves, or an image of a complex
pattern.
• Memory capacity (the number of images you can record) will be affected by the
quality settings you configure (page 173).
Procedure
REC mode * [MENU] * Quality Tab * » Quality
For details, see the Control Panel procedure on page 39.
Image Quality Settings (Quality)
Specifying Snapshot Size (Size)
Specifying Snapshot Image Quality (Quality (Snapshot))
Fine Gives image quality priority.
Normal Normal
Economy Gives number of images priority.
Specifying Movie Image Quality (Quality (Movie))
83 Advanced Settings
Procedure
REC mode * [MENU] * Quality Tab * EV Shift
You can manually adjust an image’s exposure value (EV value) before shooting it.
• Exposure Compensation Range: –2.0 EV to +2.0 EV
• Unit: 1/3 EV
1. Use [8] and [2] to adjust the exposure compensation value.
To cancel exposure compensation, change the EV value to 0.0.
2. Press [SET].
This applies the exposure compensation value. The exposure compensation
value you set remains in effect until you change it or turn off the camera (which
causes it to revert to “0.0”).
NOTE
• When shooting under very dark or very bright conditions, you may not be able to
obtain satisfactory results even after performing exposure compensation.
Procedure
REC mode * [MENU] * Quality Tab * White Balance
You can adjust white balance to match the source of light available where you are
shooting and avoid the blue cast that results when shooting outdoors when it is
cloudy, and the green cast that results when shooting under fluorescent lighting.
Correcting Image Brightness (EV Shift)
[8] : Increases the EV value. A higher EV
value is best for light-colored subjects
and backlit subjects.
[2] : Decreases the EV value. A lower EV
value is best for dark-color subjects and
for shooting outdoors on a clear day.
Controlling White Balance (White Balance)
84 Advanced Settings
• When “Auto” is selected for the white balance setting, the camera automatically
determines the white point of the subject. Certain subject colors and light source
conditions can cause problems when the camera tries to determine the white point,
which makes proper white balance adjustment impossible. If this happens, select
the white balance setting that matches your shooting conditions (Daylight,
Overcast, etc.)
Procedure
REC mode * [MENU] * Quality Tab * ISO
For details, see the Control Panel procedure on page 45.
Auto Configures the camera to adjust white balance automatically
(Daylight) For shooting outdoors on a clear day
(Overcast) For shooting outdoors on an overcast rainy day, in the shade, etc.
(Shade) For shooting on a clear day in the shade of trees or buildings
(Day White
Fluorescent) For shooting under white or day white fluorescent lighting
(Daylight
Fluorescent) For shooting under daylight fluorescent lighting
(Tungsten) For shooting under light bulb lighting
Manual
For configuring the camera manually to suit a particular light
source
1Select “Manual”.
2Under the lighting conditions you plan to
use when shooting, point the camera at a
blank white piece of paper so it fills the
entire monitor screen and then press the
shutter button.
3Press [SET].
The white balance setting is retained even if you turn off the
camera.
Specifying ISO Sensitivity (ISO)
¤
“
†
–
«
Blank white paper
85 Advanced Settings
Procedure
REC mode * [MENU] * Quality Tab * Metering
The metering mode determines what part of the subject is metered for exposure.
• The currently selected metering mode is indicated by an icon on the snapshot
screen. No icon is displayed when “B Multi” is selected as the metering mode.
Procedure
REC mode * [MENU] * Quality Tab * Lighting
You can use this setting to optimize the balance between bright areas and dark areas
when shooting images.
• You also can optimize the balance between bright areas and dark areas in existing
images (page 101).
Specifying the Metering Mode (Metering)
Multi
Multi-pattern metering divides the image into sections and
measures the light in each section for a balanced exposure reading.
This type of metering provides error-free exposure settings for a
wide range of shooting conditions.
Center
Weighted
Center weighted metering concentrates on the center of the focus
area to measure light. This type of metering is best when you want
some level of control over contrast.
Spot
Spot metering takes readings at a very small area. Use this
metering method when you want exposure to be set according to
the brightness of a particular subject, without being affected by
surrounding conditions.
Optimizing Image Brightness (Lighting)
Extra
Performs a higher level of brightness correction than the “On” setting.
When this option is selected, it takes longer for the image to be stored
after the shutter button is pressed.
On Performs brightness correction.
Off Does not perform brightness correction.
B
N
˜
86 Advanced Settings
Procedure
REC mode * [MENU] * Quality Tab * Color Filter
Settings: Off, B/W, Sepia, Red, Green, Blue, Yellow, Pink, and Purple
Procedure
REC mode * [MENU] * Quality Tab * Sharpness
You can specify one of five sharpness settings from +2 (sharpest) to –2 (least sharp).
Procedure
REC mode * [MENU] * Quality Tab * Saturation
You can specify one of five saturation settings from +2 (most saturated) to –2 (least
saturated).
Procedure
REC mode * [MENU] * Quality Tab * Contrast
You can specify one of five contrast settings from +2 (most contrast between light and
dark) to –2 (least contrast between light and dark).
Procedure
REC mode * [MENU] * Quality Tab * Flash Intensity
You can specify one of five flash intensity settings, from –2 (weakest) to +2
(strongest).
• Flash intensity may not change when the subject is too far away or too close.
Using Built-in Color Filters (Color Filter)
Controlling Image Sharpness (Sharpness)
Controlling Color Saturation (Saturation)
Adjusting Image Contrast (Contrast)
Specifying Flash Intensity (Flash Intensity)
87 Viewing Snapshots and Movies
Viewing Snapshots and Movies
See page 28 for the procedure for viewing snapshots.
1. Press [p] (PLAY) and then use [4] and [6] to display the movie you
want to view.
2. Press [SET] to start playback.
Movie Playback Controls
• Playback may not be possible for movies not recorded with this camera.
Viewing Snapshots
Viewing a Movie
Fast forward/
fast reverse
[ ]4] [6
• Each press of either button increases the speed of the fast
forward or fast reverse operation.
• To return to normal playback speed, press [SET].
Play/pause [SET]
1 frame forward/
back
[ ]4] [6
• Holding down either button scrolls continuously.
Volume
adjustment
Press [2] and then press [8 2] [ ].
• Volume can be adjusted only while movie playback is in
progress.
Information
display on/off [8] (DISP)
Zoom
Press the zoom button z [ ( ).
• You can use [8 2 4], [ ], [ ], and [6] to scroll the zoomed
image on the monitor screen. You can zoom a movie image
up to 4.5 times normal size.
Stop playback [MENU]
Movie icon: »
Image quality
Recording time
89 Viewing Snapshots and Movies
NOTE
• Multiple images shot using “Normal Speed CS” are stored individually and are not
grouped. This means they can be displayed individually (page 28) but not as a CS
group.
You can use the following procedures to delete images while playback is in progress
or paused.
. Deleting a Specific CS Group File
1. While CS image playback is in progress or paused, press [2].
2. Use [4 6] and [ ] to display the image you want to delete.
3. Use [8 2] and [ ] to select “Delete” and then press [SET].
• To delete other files, repeat steps 2 and 3.
• To exit the delete operation, press [MENU].
. Deleting All Files in a CS Group
1. While CS image playback is in progress or paused, press [2].
2. Use [8 2] and [ ] to select “Del Group Images” and then press [SET].
3. Use [8 2] and [ ] to select “Yes”, and then press [SET].
Use the following to divide up a CS Group into individual images.
. Dividing Up a Specific CS Group
1. While a CS group is displayed, press [MENU].
2. Use [4 6] and [ ] to select the “PLAY” tab.
3. Use [8 2 6] and [ ] to select “Divide Group” and then press [ ].
Deleting Continuous Shutter Images
Dividing Up a CS Group
90 Viewing Snapshots and Movies
4. Use [4 6] and [ ] to display the CS group you want to divide up.
5. Use [8 2] and [ ] to select “Divide” and then press [SET].
• To divide up other CS group files, repeat steps 4 and 5.
. Dividing Up All CS Groups
1. While a CS group is displayed, press [MENU].
2. Use [4 6] and [ ] to select the “PLAY” tab.
3. Use [8 2 6] and [ ] to select “Divide Group” and then press [ ].
4. Use [8 2] and [ ] to select “Divide All Groups” and then press [SET].
5. Use [8 2] and [ ] to select “Yes”, and then press [SET].
• Once a CS group is divided, it cannot be regrouped.
1. In the PLAY mode, use [4] and [6] to scroll through the images until
the one you want is displayed.
2. Press the zoom button z ([) to zoom.
You can use [8], [2], [4], and [6] to scroll the
zoomed image on the monitor screen. Press the zoom
button w to unzoom the image.
– When monitor screen contents are turned on, a
graphic in the lower right corner of the screen
shows what part of the zoomed image is currently
displayed.
– To exit the zoom screen, press [MENU] or [BS].
– Though the maximum image zoom factor is 8X,
certain image sizes may not allow zooming up to
the full 8X.
• Pressing [SET] will lock the current zoom factor for
the on-screen image. You can then use [ ] to scroll between images, 4] and [6
using the same zoom factor. Pressing [SET] again will unlock the zoom factor
and allow you to use [8], [ ], [2 4] and [6] to move around the currently
displayed images.
Zooming an On-screen Image
Image area
Current display area
Zoom factor
92 Viewing Snapshots and Movies
1. Turn off the camera. Next, rotate the cover lock dial in the [ 4OPEN]
direction and open the memory card/terminal cover.
2. Use the AV cable that comes with the camera to connect it to the TV.
• Make sure that you insert the cable connector into
the USB/AV port until you feel it click securely into
place. Failure to insert the connector fully can result
in poor communication or malfunction.
• Note that even while the connector is fully inserted,
you still will be able to see the metal part of the
connector as shown in the illustration.
3. Turn on the TV and select its video input mode.
If the TV has more than one video input, select the one where the camera is
connected.
Viewing Snapshots and Movies on a TV Screen
Yellow
AV cable
(bundled)
USB/AV port
White
AudioVideo
VIDEO IN jack (yellow)
AUDIO IN jacks (white)
TV
Making sure that the 4 mark on the camera is aligned with the 6 mark of the AV
cable connector, connect the cable to the camera.
93 Viewing Snapshots and Movies
4. Press [p] (PLAY) to turn on the camera.
This will cause an image to appear on the TV screen, without anything appearing
on the camera’s monitor screen.
• You also can change the aspect ratio of the screen and the video output
system (page 146).
5. Now you can display images and play back movies as you normally do.
IMPORTANT!
• Audio is initially output by the camera at maximum volume. When you first start
displaying images, set the TV volume control at a relatively low level and then
adjust it as required.
NOTE
• Audio is monaural.
• Certain TVs may cut off part of the images.
• All icons and indicators that appear on the monitor screen also appear on the TV
screen. You can use [8] (DISP) to change the display contents.
Recording Camera Images to a DVD Recorder or Video Deck
Use one of the following methods to connect the camera to the recording device
using the camera’s bundled AV cable.
– DVD recorder or video deck: Connect to the VIDEO IN and AUDIO IN terminals.
– Camera: USB/AV port
You can play a slideshow of snapshots and movies on the camera and record it on a
DVD or video tape. You can record movies by selecting “» Only” for the slideshow
“Images” setting (page 94). When recording images to an external device, use [8]
(DISP) to clear all indicators from the monitor screen (page 148).
For information about connecting a monitor to the recording device and about how to
record, see the user documentation that comes with the recording device you are
using.
94 Other Playback Functions (PLAY)
Other Playback Functions (PLAY)
This section explains menu items that you can use to configure settings and perform
other playback operations.
Procedure
PLAY mode * [MENU] * PLAY Tab * Slideshow
For information about menu operations, see page 65.
Playing a Slideshow on the Camera (Slideshow)
Start
Starts the slideshow.
Images
Specifies the type of images to be included in the slideshow.
All images: Snapshots, movies, and audio recordings
T Only: Snapshots and audio snapshots only
» Only: Movies only
One Image: One single selected image (selected using [ ] and [4 6])
Time
Time from the start to the end of the slideshow
1 to 5 minutes, 10 minutes, 15 minutes, 30 minutes, 60 minutes
Interval
Amount of time each image remains displayed
Use [4] and [ ] to select a value from 1 to 30 seconds, or “MAX”.6
If you specify a value from 1 to 30 seconds, images change at the specified
interval, but the audio portion of movies and audio snapshots will continue to
play until the end.
When the slideshow reaches a movie file while “MAX” is selected, only the first
frame of the movie will displayed. Voice Recording files are not played back
when “MAX” is selected.
95 Other Playback Functions (PLAY)
• To stop the slideshow, press [SET]. Pressing [MENU] instead of [SET] stops the
slideshow and returns to the menu screen.
• Adjust audio volume by pressing [2 8] and then press [ ] or [2] during playback.
• All button operations are disabled while the slideshow is transitioning from one
image to another.
• The time required for transition from one image to another may be longer in the
case of an image that was not recorded with this camera.
You can replace the built-in slideshow background music with other music from your
computer.
Supported File Types:
• PCM format (16-bit, monaural) WAV files
• Sampling Frequencies: 11.025 kHz/22.05 kHz/44.1 kHz
Number of Files: 9
File names: SSBGM001.WAV to SSBGM009.WAV
• Create the music files on your computer using the above names.
• Regardless of which effect pattern you select, the BGM files you store in camera
memory are played back in name sequence.
Effect
Select the effect you want.
Pattern 1 to 5: Plays background music and applies an image change effect.
• Patterns 1 through 4 have different background music, but they all use the
same image change effect.
• Pattern 5 can be used for playback of snapshots only, and the “Interval”
setting is ignored.
• The currently selected image change effect setting is disabled automatically
in following cases.
– When playing a slideshow for which “» Only” or “One Image” is selected
for the “Images” setting
– When the interval setting is “MAX”, 1 second or 2 seconds.
– Before and after playback of a movie or Voice Recording file
Off: No image change effect or background music
Saving Music from Your Computer to Camera Memory
96 Other Playback Functions (PLAY)
1. Connect the camera to your computer (pages 122, 131).
If you plan to save the music files to the camera’s memory card, make sure the
card is loaded in the camera.
2. Perform one of the following operations to open the memory card or
built-in memory.
This will cause the camera to be recognized by your computer as a Removable
Disk (Drive).
• Windows
1Windows 7/Vista: Start * Computer
Windows XP: Start * My Computer
Windows 2000: Double-click “My Computer”.
2Double-click “Removable Disk”.
• Macintosh
1Double-click the camera’s drive icon.
3. Create a folder named “SSBGM”.
4. Double-click the “SSBGM” folder you created and copy the
background music file to it.
• See the user documentation that comes with your computer for information
about moving, copying, and deleting files.
• If there are background music files both in built-in memory and on the memory
card loaded in the camera, the files on the memory card take priority.
• See page 137 for information about camera folders.
5. Disconnect the camera from the computer (pages 124, 133).
97 Other Playback Functions (PLAY)
Procedure
PLAY mode * Spnapshot Screen * [MENU] * PLAY Tab *
Layout Print
You can use the following
procedure to insert existing
snapshots into the frames of a
layout and produce a new image
that contains multiple snapshots.
1. Use [4] and [6] to select
the layout pattern you want
and then press [SET].
2. Use [4] and [6] to select the background color and then press [SET].
3. Use [4] and [6] to select the images you want to include in the layout
then press [SET].
4. Press [SET] and repeat step 3 for the remaining frames in the layout.
The final layout image will be saved after you insert the final snapshot into it.
NOTE
• You will not be able to save the new image unless there is a snapshot in all of the
layout frames.
• 3:2 and 16:9 images cannot be included in a Layout Print image.
• The recording date of the resulting Layout Print image is the recording date if the
image you place into the final frame, not the date you create the Layout Print
image.
• The Layout Print image is saved as 7M (3072 x2304 pixels) size.
Laying Out Snapshots with Layout Print (Layout Print)
Layout Pattern
(2 images)
Layout Pattern
(3 images)
98 Other Playback Functions (PLAY)
Procedure
PLAY mode * Movie Screen to be Used * * * [MENU] PLAY Tab
MOTION PRINT
1. Use [4] and [6] to scroll
through the movie frames
and display the one you
want to use as the image of
the MOTION PRINT image.
Holding down [4] or [6] scrolls
at high speed.
2. Use [8] and [2] to select either “9 frames” or “1 frame” and then
press [SET].
• When “9 frames” is selected, the frame you select in step 1 will be in the center
of the MOTION PRINT image.
• Only the frames of movies recorded on this camera can be used in a MOTION
PRINT image.
Creating a Snapshot of Movie Frames (MOTION PRINT)
9 frames 1 frame
99 Other Playback Functions (PLAY)
Procedure
PLAY mode * Movie Screen of Movie to be Edited * [MENU] *
PLAY Tab * Movie Editing
The Movie Editing feature lets you use one of the following procedures to edit out a
specific part of a movie.
1. Use [8] and [ ] to select the editing method you want to use and then 2
press [SET].
2. Use [4] and [6] to scroll through the movie and
search for the frame (point) from which or to
which you want to cut the movie (the cut point).
• You also can search for the cut location by playing
back the movie and pressing [SET] to pause. During
playback, you can press [4] or [6] to perform fast
reverse or fast forward.
Editing a Movie on the Camera (Movie Editing)
Cut
(To-Point Cut)
Cuts everything from the beginning of the movie up to the
current location.
Cut
(Point-To-Point Cut) Cuts everything between two points.
Cut
(From-Point Cut)
Cuts everything from the current location to the end of the
movie.
}
~
¡
Cut range (red)
100 Other Playback Functions (PLAY)
3. When the frame where you want the cut point to be is displayed, press
[2].
4. Use [8] and [2] to select “Yes” and then press [SET].
The selected cut operation will take considerable time to complete. Don’t try to
perform any camera operation until the “Busy... Please wait...” message
disappears from the monitor screen. Note that a cut operation can take a long
time if the movie being edited is long.
IMPORTANT!
• When you edit a movie, only the result is saved. The original movie is not retained.
An editing operation cannot be undone.
NOTE
• A movie that is shorter than five seconds cannot be edited.
• Editing of movies recorded with a different type of camera is not supported.
• You will not be able to edit a movie if the amount of remaining memory capacity is
less than the size of the movie file you want to edit. If there is not enough memory
available, delete files you no longer need to free up more.
• Splitting of a movie into two movies and splicing of two different movies into a
single movie are not supported.
• You also can start a movie editing operation while the movie you want to edit is
playing back. Press [SET] to pause playback, and then press [ ] to display the 2
menu of editing options. Perform editing using the same procedures as described
above.
Cut
(To-Point Cut)
While the frame you want the cut to be up to is
displayed, press [2].
Cut
(Point-To-Point Cut)
1While the frame you want the first (From) cut to be is
displayed, press [2].
2While the frame you want the second (To) cut to be
is displayed, press [2].
Cut
(From-Point Cut)
While the frame you want the cut to be from is
displayed, press [2].
}
~
¡
101 Other Playback Functions (PLAY)
Procedure
PLAY mode * Snapshot Screen * [MENU] * PLAY Tab * Lighting
You can use this setting to optimize the balance between bright areas and dark areas
in existing images.
NOTE
• Correcting the lighting when shooting produces better results (page 85).
• Altering the lighting of an image causes the original image and the new (altered)
version to be stored as separate files.
• When you display an altered image on the camera’s monitor screen, the date and
time indicates when the image was originally recorded, not when the image was
altered.
Procedure
PLAY mode * Snapshot Screen * [MENU] * PLAY Tab * Red Eye
Using the flash to shoot at night or in a dimly lit room can cause red spots inside the
eyes of people who are in the image. This is caused when the light from the flash
reflects off of the retina of the eye. Red eye correction corrects the eye colors of
subjects to their normal colors when red eye occurs while using the flash.
NOTE
• The original snapshot is retained in memory and not deleted.
• Red eye correction may not be possible in the case of small faces or profiles.
• Red eye correction may not produce the desired effect under certain conditions.
Optimizing Image Brightness (Lighting)
+2 Performs a higher level of brightness correction than the “+1” setting.
+1 Performs brightness correction.
Cancel Does not perform brightness correction.
Using Red Eye Correction (Red Eye)
Correct Turns on red eye correction.
Cancel Turns off red eye correction.
Produkt Specifikationer
Mærke: | Casio |
Kategori: | Kamera |
Model: | Exilim EX-G1 |
Har du brug for hjælp?
Hvis du har brug for hjælp til Casio Exilim EX-G1 stil et spørgsmål nedenfor, og andre brugere vil svare dig
Kamera Casio Manualer
2 September 2024
20 August 2024
16 August 2024
15 August 2024
13 August 2024
9 August 2024
9 August 2024
8 August 2024
8 August 2024
6 August 2024
Kamera Manualer
- Kamera Bosch
- Kamera SilverCrest
- Kamera Acer
- Kamera Ozito
- Kamera Denver
- Kamera Sony
- Kamera Canon
- Kamera Samsung
- Kamera GE
- Kamera Panasonic
- Kamera TP-Link
- Kamera Philips
- Kamera Lenco
- Kamera Gigaset
- Kamera Braun
- Kamera Logitech
- Kamera Epson
- Kamera Daewoo
- Kamera Technaxx
- Kamera HP
- Kamera Sanyo
- Kamera Easypix
- Kamera Grundig
- Kamera D-Link
- Kamera Arlo
- Kamera Bushnell
- Kamera Pyle
- Kamera Fujifilm
- Kamera Nikon
- Kamera Kodak
- Kamera Lenovo
- Kamera Olympus
- Kamera Nedis
- Kamera Zorki
- Kamera Optoma
- Kamera Creative
- Kamera Azden
- Kamera Trevi
- Kamera Trust
- Kamera Laserliner
- Kamera Blaupunkt
- Kamera JVC
- Kamera Leica
- Kamera Hitachi
- Kamera Medion
- Kamera Exakta
- Kamera EZVIZ
- Kamera König
- Kamera Gembird
- Kamera Powerfix
- Kamera Alpine
- Kamera Netgear
- Kamera Maginon
- Kamera Avaya
- Kamera Nest
- Kamera Vtech
- Kamera BenQ
- Kamera Bresser
- Kamera Anker
- Kamera Sigma
- Kamera Pentax
- Kamera Rollei
- Kamera Xiaomi
- Kamera Moultrie
- Kamera Viewsonic
- Kamera Imou
- Kamera Polaroid
- Kamera Ricoh
- Kamera Aida
- Kamera Konica-Minolta
- Kamera Foscam
- Kamera Kyocera
- Kamera GoPro
- Kamera Lorex
- Kamera Cobra
- Kamera Velleman
- Kamera FLIR
- Kamera Swann
- Kamera Eufy
- Kamera Celestron
- Kamera Ring
- Kamera Fluke
- Kamera Hikvision
- Kamera AVerMedia
- Kamera Reolink
- Kamera EVE
- Kamera Prixton
- Kamera Marshall Electronics
- Kamera General Electric
- Kamera SPC
- Kamera Hanwha
- Kamera ARRI
- Kamera BirdDog
- Kamera Bauhn
- Kamera MuxLab
- Kamera Spypoint
- Kamera Vivitar
- Kamera Ansco
- Kamera Vimar
- Kamera Oregon Scientific
- Kamera Dahua Technology
- Kamera SereneLife
- Kamera Lexibook
- Kamera Intel
- Kamera SJCAM
- Kamera Scosche
- Kamera Speco Technologies
- Kamera Joy-It
- Kamera Kogan
- Kamera Levenhuk
- Kamera Emerson
- Kamera Minox
- Kamera Burris
- Kamera Silvergear
- Kamera Elmo
- Kamera AViPAS
- Kamera UniView
- Kamera AquaTech
- Kamera Alfatron
- Kamera BZBGear
- Kamera PTZ Optics
- Kamera Daitsu
- Kamera Agfa
- Kamera AgfaPhoto
- Kamera Argus
- Kamera Lumens
- Kamera Yashica
- Kamera Sygonix
- Kamera Mamiya
- Kamera Zenit
- Kamera Fuji
- Kamera Minolta
- Kamera EverFocus
- Kamera RunCam
- Kamera SeaLife
- Kamera Aplic
- Kamera FIMI
- Kamera Meade
- Kamera Contax
- Kamera Sinji
- Kamera Traveler
- Kamera Digital Watchdog
- Kamera Getac
- Kamera Ikegami
- Kamera Pelco
- Kamera ZeissIkon
- Kamera Dorr
- Kamera HOLGA
- Kamera Praktica
- Kamera Hasselblad
- Kamera Moto Mods (Motorola)
- Kamera Fantasea Line
- Kamera Brinno
- Kamera Z CAM
- Kamera General
- Kamera Ergoguys
- Kamera Strex
- Kamera Berger & Schröter
- Kamera Leitz Focomat IIc
- Kamera Cosina
- Kamera Videology
- Kamera InfiRay
- Kamera Videotec
- Kamera GoXtreme
- Kamera IOptron
- Kamera Cambo
- Kamera Kobian
- Kamera Kyocera Yashica
- Kamera Red Digital Cinema
- Kamera Konica
- Kamera Akaso
- Kamera Seek Thermal
- Kamera Ikelite
- Kamera Adeunis
- Kamera Hoppstar
- Kamera PatrolEyes
- Kamera Camouflage
- Kamera HuddleCamHD
- Kamera Linhof
- Kamera Aquapix
- Kamera KanDao
Nyeste Kamera Manualer
14 Januar 2025
13 Januar 2025
12 Januar 2025
11 Januar 2025
11 Januar 2025
11 Januar 2025
8 Januar 2025
5 Januar 2025
30 December 2025
30 December 2025