Celly CLICKRINGBTBK Manual

Celly Ikke kategoriseret CLICKRINGBTBK

Læs nedenfor 📖 manual på dansk for Celly CLICKRINGBTBK (30 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 17 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF
Side 1/30
Read this user manual and
especially the safety notes
before using the product. Keep
the user manual for future
reference and include it when passing the
product to a third party. Esprinet S.p.A. will
not be held responsible in any way for injuries
or damage caused to persons or property
resulting from improper use of the product.
Notes on safety
Do not use the product if it is damaged.
Never touch the product with wet or damp
hands.
Use the product indoors only. Do not use in
humid environments or in the rain.
Do not insert metal objects such as keys or
paper clips into the product openings.
To prevent malfunction or damage to the
product, avoid accidental falls, crush, puncture
or exert a high level of pressure on the product.
Keep away from moisture, water or other
liquids. If the product comes into contact with
water, moisture or other liquids, do not use it
to avoid electric shock or damage.
Do not store or expose the product to heat
sources, direct sunlight, radiators, stoves or
other heat sources such as the car dashboard
in summer.
Never use the product unsupervised. During
operation, the housing may overheat. Do not
cover the product during use.
Never use the product when changing from
a cold to a warm environment. Condensation
may occur and, in some cases, damage the
product.
Allow the product to reach room temperature
before connecting and reusing it. It may take
several hours.
Usage temperature: 0–40 ° C.
Do not attempt to modify, repair or
disassemble the product. Risk of explosion!
Do not use a damaged product.
Stop using the product immediately if you
notice any swelling, dispersion or other
abnormality.
Never use aggressive detergents, alcohol or
other chemical solutions for cleaning as they
can damage the housing or even compromise
the functionality of the product.
Disconnect all connected cables before
starting cleaning. Do not immerse the product
in water or other liquids.
ere are no serviceable parts inside the
product. Never open / disassemble it.
Keep the product out of the reach of
children. Do not allow children or people with
disabilities to use electrical products without
supervision. Make sure children do not play
with the plastic wrap. ey could swallow it
while playing and choke.
Make sure the cable provided for charging the
product is intact and does not short circuit the
charging ports.
Warnings
1. e outlet must be installed close to the
equipment and easily accessible. Keep out of
reach of children. Do not open or damage the
device. Keep away from water and heat.
2. Before charging the device, make sure
that the technical characteristics (Voltage,
output and amperage) are compatible with
the product.
Do not use this product with a damaged
adapter or a damaged cable.
3.is product should be used indoors only.
4. While the LED light is on, do not directly
illuminate the eyes from a close distance to
prevent eye injury.
5. is product may turn on or off under strong
electromagnetic waves.
7. e light source of this lamp cannot be
replaced, when the light source ends its life
cycle, the whole lamp should be replaced.
8. is product can tip over if not used on flat
surfaces, check before use.
Use (instructions for use)
REFILL
Plug the smaller end of the supplied micro
USB cable into the micro USB port on the
product.
Plug the larger end of the micro USB cable
into the USB port of a charging socket or
computer. Charging of the product will start.
It is recommended to charge 10 hours for the
first charge cycle. During charging, part of the
LED will light up red. At the end of the charge,
the red led will turn off. e time required for
charging is 2 hours.
Disconnect the micro USB cable from the USB
port of the product after charging.
POWER ON
Press and hold the multifunction button on
the remote control which acts as the remote
control for about 3 seconds, the light will flash
blue starting the pairing mode.
PAIRING
Place the product and the device within 1
meter of each other. Activate the bluetooth®
function of the device you intend to pair.
Search for the device from the Bluetooth®
menu and select “Multifun-Shutter” to start
the connection.
If a password is requested, enter “0000”.
AUTOMATIC RECONNECTION:
Once "Multifun-Shutter" and the coupling
device have been paired, they will be
automatically reconnected if they are within
a short distance of each to the other and the
Bluetooth® function of the pairing device is
activated.
Open the tripod and turn on the lamp: Place
the lamp on a flat surface, press the power
symbol on the right side to turn on the lamp.
Press the power button to cycle through three
light tones: warm, cool, and neutral.
Press the power button again to turn off the
lamp.
Use the remote control included in the
package to take pictures or shoot videos.
SHUTDOWN
Press and hold the multifunction button for 3
seconds, the blue LED will flash indicating that
it has turned off.
AUTOMATIC SHUTDOWN
If the Bluetooth® connection is not made
within 5 minutes, the device will automatically
turn off.
Cleaning
Disconnect all cables before cleaning. If
necessary, clean the lamp with a damp cloth
and allow it to dry completely before use.
Use a clean brush with soft, long bristles to
remove dust from the connectors. Do not use
solvents, corrosive or gaseous detergents.
Make sure that no water or other liquids enter
the housing.
storage
Store the product in a clean and dry area. Keep
it away from direct sunlight.
CUSTOMER’S INFORMATION FOR
RIGHT WASTE OF THIS PRODUCT
(Directive 2013/56/EU)
e crossed-out bin symbol shown on the
equipment or on its packaging indicates
that the product at the end of its useful life,
including the non-removable battery, must
be collected separately from other waste
to allow for proper treatment and recycling.
e safe use of this product is guaranteed in
compliance with the following instructions,
therefore it is necessary to keep them and
follow them scrupulously throughout the
life of the product. e product does not
require technical maintenance, NEVER
DISASSEMBLE IT. e battery inside is
integrated and not replaceable. Do not
try to remove the built-in Lithium Ion /
Polymer battery yourself as it may cause
overheating, fire and injury. e battery should
only be removed by independent qualified
professionals who are able to remove it
safely and disposed of in accordance with
applicable laws. e user must, therefore,
give the equipment at the end of its life free
of charge to the appropriate municipal centers
for the separate collection of electrical and
electronic waste, or return it to the retailer,
on a one-by-one basis, or free of charge for
appliances with smaller external dimensions.
to 25 cm. Adequate separate collection for the
subsequent sending of the decommissioned
equipment for recycling, treatment and
environmentally compatible disposal helps
to avoid possible negative effects on the
environment and health and favors the reuse
and / or recycling of the materials of which it
is composed the equipment. Illegal disposal of
equipment, batteries and accumulators by the
user involves the application of the penalties
provided for in the current legislation.
Technical specifications
Input: DC 5V / 1A
Maximum lighting power: 5W-12W
Nominal lighting power: 1.85W
Brightness temperature: 2900-5500K
LED number: 80
Battery life of the led: 2-3h
Battery: 3.7V / 1200mAh / 4.44Wh
Frequency: 2.4 - 2.4835 GHz
Maximum radiated power: <20mW
Removable battery CR1632: 10000 shots
Remote control standby time: 2 months
Bluetooth® version: 4.0
Software and version: zzlc-bt01-qfn32
Phone size up to: 6.5 "
Weight: 360g
Maximum extension of the tripod: 90 cm
Size: 21 * 15.5 * 7cm
Working temperature: 0–40 ° C.
is product complies with RoHS
2011/65 / EU - RoHS 2015/863 /
EU. e product carries the CE mark
and complies with the safety standards
established by the European Union.
Hereby, Esprinet SpA declares that the
product complies with Directive 2014/53 /
EU.
e full text of the EU declaration of
conformity is available at the following
internet address:
w w w . c e l l y . c o m / e x c h a n g e / C E L LY -
S P A / D i c h i ar a z i o ni _ d i _c o n f o r m i t a /
CLICKRINGBTBK/DOC_CLICKRINGBTBK.pdf
Celly® is a trademark owned by CELLY
S.p.A.
All brands are registered trademarks of
their respective owners.
Esprinet S.p.A., via Energy Park
20, 20871 Vimercate (MB) -
Italy
Made in China.
User manual
TRIPOD WITH LED LIGHT
Model: CLICKRINGBTBK
Rev01 - 23.12.2020
EN

Produkt Specifikationer

Mærke: Celly
Kategori: Ikke kategoriseret
Model: CLICKRINGBTBK
Højde: 219 mm
Vægt: 360 g
Produktfarve: Sort
Diameter: 155 mm
Lyskildeteknologi: LED

Har du brug for hjælp?

Hvis du har brug for hjælp til Celly CLICKRINGBTBK stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret Celly Manualer

Celly

Celly Vision Of Super Manual

19 November 2024
Celly

Celly WLSTAND3IN1BK Manual

19 November 2024
Celly

Celly USB-C2M Manual

24 September 2024
Celly

Celly TC1USBC20WWH Manual

6 September 2024
Celly

Celly TCMICRO Manual

6 September 2024
Celly

Celly TC2USBC20WWH Manual

6 September 2024
Celly

Celly TCUSBTURBO Manual

6 September 2024
Celly

Celly RTGTC20WWH Manual

6 September 2024
Celly

Celly RTGCC20WBK Manual

6 September 2024
Celly

Celly Black Label BLPOWERS60W Manual

6 September 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Gigabyte

Gigabyte ODIN GT 550W Manual

23 November 2024
Vitec

Vitec MGW Diamond-HX OG Manual

23 November 2024
Stamos

Stamos SWG-PTABLE-100PCT Manual

23 November 2024
Stamos

Stamos S-PLASMA 60U Manual

23 November 2024
Velbus

Velbus VMBPIRO-W-20 Manual

23 November 2024
Honor

Honor 90 Pro Manual

23 November 2024
Honor

Honor 80 SE Manual

23 November 2024
Medela

Medela Safe & Dry Manual

22 November 2024
Stamos

Stamos S-PLASMA 70-IGBT Manual

22 November 2024
Jane

Jane First Potty Manual

22 November 2024