Celly PC2SMARTBAND Manual

Celly Sport PC2SMARTBAND

Læs nedenfor 📖 manual på dansk for Celly PC2SMARTBAND (46 sider) i kategorien Sport. Denne guide var nyttig for 4 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/46
Please read this manual and
pay attention to the safety
warnings before using the
product
Keep the manual to have the possibility
to consult it at a later time, or in case of
passing the product to a third party.
Esprinet S.p.A. can not in any way be
held responsible for injury or damage
caused to people or things resulting from
improper use of the product.
e results of the functions offered are
for reference only, cannot be used to
determine the actual condition of the
human body, cannot be used for medical
testing purposes, not as a judgment on
the health of the body.
System and hardware requirement:
Android 4.4 or later / IOS 8.0 or later
Preparation:
the product must be activated by fully
charging it before first use. Press and
hold the right power button. Next, be
sure to keep the device sufficiently
charged.
Hook the connector to the body of the
product and insert into the USB port of a
charger to activate it (be careful to insert
it correctly and use the correct current).
Connection:
Verify that your phone meets the above
requirements.
Download the APP to connect.
Please search "FitPro" APP in the App
Store or Android store to scan the
following QR CODE
Association:
the product must be activated by fully
charging it before first use. e device will
start automatically. Next, be sure to keep
the device sufficiently charged.
Hook the connector to the body of the
product and insert into the USB port of a
charger to activate it (be careful to insert
it correctly and use the correct current).
Connection:
Verify that your phone meets the above
requirements.
Download the APP to connect.
Please search for "FitPro" APP in the App
Store or Android store or scan the
following QR CODE
Association:
Make sure your smartphone's wireless
functionality is turned on and open the
FitPro app.
Search and select T-BAND and pair the
device. Touch the product screen to wake
up the device during the process and
complete the pairing.
Usage:
Once the device has connected to the
app, it will sync the time. It will record and
analyze your activities, oxygen saturation,
heart rate and blood pressure.
Touch key - One touch of the touch key:
switch interface - Press and hold the
touch key: enter
Bracelet functions: Time -> Pedometer
mode -> Distance traveled mode ->
Calorie mode -> Heart rate mode -> Blood
pressure mode -> Oxygen saturation
mode -> Messages
Functions:
1. Time mode: display time, battery, date,
heart rate, steps. Press and hold the
touch key to switch between the available
interfaces
2. Pedometer: Automatically records the
number of steps
3. Distance traveled: Automatically
records the distance traveled
4. Calorie mode: displays the calories
burned
5. Heart Rate Monitor: e device will
automatically measure your heart rate.
You can also manually measure your heart
rate via APP. e page will display the
most recent measurement data.
6. Blood Pressure Monitor: e device will
automatically measure the current blood
pressure situation. e page will show
the most recent measurement data (the
measurement time is about 150 seconds.
7. Oxygen Saturation Monitor: e device
will automatically measure blood oxygen
saturation levels. You can also manually
measure oxygen saturation via APP.
e page will display the most recent
measurement data.
8. Sleep Tracking: Automatically recognize
your status and track your entire sleep
progress with deep sleep analysis and
light sleep hours.
9. Call notifications: the bracelet will
vibrate when the phone rings.
10. Message notifications: the bracelet
will vibrate when the phone receives text
messages.
Questions and answers:
1. Can't find your device while pairing
your device?
(1) Make sure the wireless function is
turned on.
(2) Make sure the distance between the
phone and the device is no more than
0.5m.
(3) Make sure the device is charged. If
the problem persists after full charging,
please contact us.
2. Can't connect the device with the app?
Restart the wireless functionality or
smartphone to pair the device
3. Does the APP show no data? Make
sure the battery is charged and the
wireless function turned on.
4. Wrong time? If the bracelet has a low
battery, the time may be wrong. Please
recharge the bracelet and connect the
phone again.
If you are wearing a pacemaker or other
implanted electronic device, consult
your physician before using the bracelet
for the following functions: heart rate,
blood pressure and oxygen saturation.
e optical sensor of the watch lights up
green and flashes. If you have epilepsy
or are sensitive to flashing light sources,
consult your doctor if you can wear this
product. e device tracks daily activities
via sensors. is data is intended to
track your daily activities, such as steps,
sleep, distance, heart rate, saturation,
blood pressure, and calories, but they
may not be completely accurate. e
device, accessories, tracking sensors,
and other relevant data are designed
for entertainment and fitness purposes,
not for medical purposes. ey are not
applicable to the diagnosis, monitoring,
treatment or prevention of disease or
symptoms. Heart rate, blood pressure
and oxygen saturation data are for
reference only. We are not responsible
for any consequences caused by any data
deviation.
Cleaning:
Do not use solvents, corrosive or gaseous
detergents.
Specifications:
Input: DC 5V / 1A
Charging time: About 2 hours
Battery life: 6 days
Battery type: Lithium polymer, 50mah /
3.7V (0.18Wh)
Software: HS6620
App: FitPro
Frequency: 2.408-2.480GHz
Maximum radiated power: <20mW
Weight: 18.5g
Bracelet size: 24 * 1.5 * 1.5cm
Package contents: Fitness tracker, user
manual and USB charging cable
CUSTOMER’S INFORMATION
FOR RIGHT WASTE OF THIS
PRODUCT (Directive 2013/56/
EU)
e crossed-out bin symbol shown on the
equipment or on its packaging indicates
that the product at the end of its useful life,
including the non-removable battery, must
be collected separately from other waste
to allow for proper treatment and recycling.
e safe use of this product is guaranteed
in compliance with the following
instructions, therefore it is necessary to
keep them and follow them scrupulously
throughout the life of the product.
e product does not require technical
maintenance, NEVER DISASSEMBLE IT.
e battery inside is integrated and not
replaceable. Do not attempt to remove
the built-in Lithium Ion / Polymer battery
by yourself as it may cause overheating,
re and injury. e battery should only
be removed by independent qualified
professionals who are able to remove it
safely and disposed of in accordance with
applicable laws. e user must therefore
give the equipment at the end of its life
free of charge to the appropriate municipal
centers for the separate collection of
electrical and electronic waste, or return
it to the retailer, on a one-by-one basis, or
free of charge for appliances with smaller
external dimensions. to 25 cm. Adequate
separate collection for the subsequent
forwarding of the decommissioned
equipment for recycling, treatment and
environmentally compatible disposal helps
to avoid possible negative effects on the
environment and health and favors the
reuse and / or recycling of the materials
of which it is composed the equipment.
Illegal disposal of equipment, batteries
and accumulators by the user involves the
application of the penalties provided for by
the current legislation.
is product complies with the
RoHS directive 2011/65 / EU
- 2015/863 / EU. e Product
has the CE mark and therefore complies
with the safety standards established by
the European Union.
Esprinet SpA declares that the product
complies with directive 2014/53 / EU.
e full text of the EU declaration of
conformity is available at the following
Internet address: https://xchange.
esprinet.com/comp/Celly/pc2smartband.
pdf
Celly® is a trademark owned by Esprinet
S.p.A.
All brands are registered trademarks of
their respective owners.
Esprinet S.p.A., via Energy
Park 20, 20871 Vimercate
(MB) - Italy
Made in China.
www.celly.com
for info and contacts, write to:
contact@esprinet.com
User manual
FITNESS BRACELET
MODEL: PC2SMARTBAND
Rev00 - 04.2024
EN


Produkt Specifikationer

Mærke: Celly
Kategori: Sport
Model: PC2SMARTBAND

Har du brug for hjælp?

Hvis du har brug for hjælp til Celly PC2SMARTBAND stil et spørgsmål nedenfor, og andre brugere vil svare dig