Chamberlain 041-0190-000 Manual


Læs nedenfor 📖 manual på dansk for Chamberlain 041-0190-000 (3 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 54 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/3
Main Enclosure Replacement
Repair parts 041-0190-000, 041-0191-000, and 041-0207-000
Instructions
You will need:
1/4" magnetic nut driver
Long-nosed pliers
5/16" long-shafted magnetic nut driver and socket
Flathead screwdriver
The images throughout this manual are for reference only and your
product may look different.
1. Unplug garage door opener and unplug battery (if necessary)
2. Remove the plastic doors from both sides and place in a safe spot
(Figure A)
3. Remove the end panel covers from both sides and place in a safe spot
(Figure B, Item B)
4. Take 4 or 6 screws out of sides depending on model
5. Remove Integrated LED Light Module (Figure B, Item E)
6. Unplug Integrated LED Light Module (and camera if necessary) and
place in a safe spot
7. Remove 4 screws from logic board side end panel (non-pointy screws)
(Figure B, Item C)
8. Partially remove end panel
9. Disconnect logic board wire connectors (Figure B, Item D)
10. Completely remove end panel and place in a safe spot
11. Remove 4 screws from the other end panel and place in a safe spot
12. Remove nal 2 screws from chassis to detach the main enclosure cover
you are replacing
To prevent damage to the receiver/logic board, DO NOT touch printed
circuit board of replacement receiver/logic board during installation.
ALWAYS wear protective gloves and eye protection when changing
the battery or working around the battery compartment.
To prevent possible SERIOUS INJURY or DEATH:
Disconnect ALL electric and battery power BEFORE performing
ANY service or maintenance.
WARNING: This product can expose you to chemicals including
lead, which are known to the State of California to cause cancer
or birth defects or other reproductive harm. For more information
go to www.P65Warnings.ca.gov.
13. Replace main enclosure cover
14. Replace end panels to both sides using 4 screws on each side (non-
pointy screws)
15. Plug in Integrated LED Light Module (and camera if necessary)
16. Reattach module using 4 or 6 screws removed in step 4
17. Reattach end panel covers with 4 screws on each side (pointy screws)
18. Reattach plastic doors
19. Plug in garage door opener and battery (if necessary)
Control Door Panel
End Panel Cover
End Panel Logic Board Wire Connectors
LED Light Module
Figure B
Figure A
A
BC
D
E
© 2021, LiftMaster
All rights reserved
Tous droits réservés
Todos los derechos reservados
114-5583-000


Produkt Specifikationer

Mærke: Chamberlain
Kategori: Ikke kategoriseret
Model: 041-0190-000

Har du brug for hjælp?

Hvis du har brug for hjælp til Chamberlain 041-0190-000 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Chamberlain Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Elektron

Elektron Overbridge Manual

26 November 2024
Elektron

Elektron Sidstation Manual

26 November 2024
SoundTube

SoundTube IPD-RS82-EZ Manual

26 November 2024
Kramer

Kramer 4x1VB Manual

26 November 2024
Kramer

Kramer RC-63A Manual

26 November 2024
SoundTube

SoundTube IPD-HP82-EZ Manual

26 November 2024
Kramer

Kramer RK-KVM-1U-PP3 Manual

26 November 2024
Gioteck

Gioteck VX-2 (PS3) Manual

26 November 2024