Chief MTR6000 Manual


Læs nedenfor 📖 manual på dansk for Chief MTR6000 (8 sider) i kategorien Flad panel støtte. Denne guide var nyttig for 27 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/8
Chief Manufacturing, a products division of
Milestone AV Technologies
8401 Eagle Creek Parkway, Savage, MN 55378
P: 800.582.6480 / 952.894.6280 F: 877.894.6918 / 952.894.6918
8805-000215 Rev 01
©2009 Milestone AV Technologies,
A Duchossois Group Company
02/09
I N S T A LL A T IO N IN S T R U C T IO N S
MEDIUM FLAT PANEL DISPLAY TILT MOUNT
MTR Series
The MTR Series tilt mount accommodates medium flat
panel displays weighing up to 125 lbs (56.70kgs).
The teardrop holes in the mount allow for quick
connect/disconnect of the display, thus simplifying
installation and maintenance processes.
The top and bottom mounting brackets are adaptable to
single wood stud mounting or dual wood studs that are
16 on center.
The display can be pulled and tilted into any position in
the zero-to-15 degree tilt range and remain stationary.
When fully retracted, the mount depth is 1.56 inches.
After installing the display on the mount, the screen can
be locked in place using the convenient latching flag.
A padlock can be used on the latching flag for added
security.
The mount is concealed behind the display, making it a
low profile wall mount.
! IMPORTANT: If the installation of this product requires OSHPD seismic approval, refer to OSHPD pre-approval
documents and drawings before beginning installation. OSHPD documents and drawings are available at
www.chiefmfg.com, and located on the product information page for the mount.
BEFORE YOU BEGIN
CAUTION: To prevent damage to your monitor and MTR, which could affect or void the Factory
warranty, thoroughly study all instructions and illustrations before you begin to install the mount. Pay
particular attention to the Warnings and Cautions in this document.
The mount is designed to be installed using wall studs or supporting framework. The fasteners used to anchor the
mount must be capable of supporting five times the total weight of the equipment.
The maximum weight to be installed on the MTR Series tilt wall mount is 125 lbs (56.70kg).
If you have any questions about this installation, contact Chief Manufacturing at 1-800-582-6480 or 952-894-6280.
Chie is a registered trademark of Milestone AV Technologies. All rights reserved.


Produkt Specifikationer

Mærke: Chief
Kategori: Flad panel støtte
Model: MTR6000

Har du brug for hjælp?

Hvis du har brug for hjælp til Chief MTR6000 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Flad panel støtte Chief Manualer

Chief

Chief TS318TU Manual

30 Januar 2025
Chief

Chief TS318SU Manual

30 Januar 2025
Chief

Chief PWCU Manual

15 Januar 2025
Chief

Chief MIWRFUB Manual

15 Januar 2025
Chief

Chief TILD1X5NE1-M Manual

15 Januar 2025
Chief

Chief MWRIWUB Manual

15 Januar 2025
Chief

Chief TILD1X4NE1-R Manual

15 Januar 2025
Chief

Chief TILD1X3NE1-L Manual

15 Januar 2025
Chief

Chief TILD1X3NE1-R Manual

15 Januar 2025
Chief

Chief KPP110B Manual

15 Januar 2025

Flad panel støtte Manualer

Nyeste Flad panel støtte Manualer

Ateca

Ateca VARIATION00376 Manual

26 Februar 2025
Ateca

Ateca ELLIPSE00381 Manual

26 Februar 2025
Ateca

Ateca CRESCENDO00388 Manual

26 Februar 2025
Ateca

Ateca AT247BA Manual

26 Februar 2025
Ateca

Ateca LEDE00224 Manual

26 Februar 2025
Ateca

Ateca UNIQUE00335 Manual

26 Februar 2025
Ateca

Ateca LEGEND00176 Manual

26 Februar 2025
Ateca

Ateca LUXE00281 Manual

26 Februar 2025