Cisco AS5350XM Manual

Cisco Ikke kategoriseret AS5350XM

Læs nedenfor 📖 manual på dansk for Cisco AS5350XM (11 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 36 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/11

Page 1 of 11

Ordering Guide

How to Order a Cisco AS5350XM Universal Gateway

PRODUCT OVERVIEW

Cisco® AS5350XM Universal Gateways oﬀer unparalleled capacity and the ﬂexibility to deploy advanced voice, fax, and remote-access services.

With more than 24 million ports deployed, Cisco Systems® customers worldwide have shown that Cisco AS5000s provide the scale, reliability, and

suite of services required to meet market demands. The Cisco AS5350XM oﬀers best-in-class voice, fax, and remote-access services in one rack unit

(RU). The rich set of Cisco IOS® Software features available in the Cisco AS5350XM Universal Gateway makes the platform versatile and

deployable in a wide range of network architectures.

The Cisco AS5350XM Universal Gateway chassis has three slots that can take trunk cards, high-density packet voice/fax digital signal processor

(DSP) feature cards, and universal port DSP cards. Mixing high-density packet voice/fax feature cards and universal port DSP cards in the same

chassis is not supported. The following feature card options allow you to customize the platform conﬁguration to meet speciﬁc customer needs:

• The trunk card options available for this platform are 2CT1, 2CE1, 4CT1, 4CE1, 8CT1, 8CE1, and CT3.

• The high-density packet voice/fax feature card (AS5X-FC) available for this platform supports from 1 to 6 DSP modules (AS5X-PVDM2-64)

providing scalability from 64 to 384 voice and fax ports per card.

• The universal port DSP card options available for this platform are NP108 (108 universal ports) and NP60 (60 universal ports).

This document describes how to order the Cisco AS5350XM Universal Gateway and the relevant software licenses required for the gateway

features.

BEFORE YOU BEGIN

Before you begin, have the following information ready:

• Is an AC or DC power supply required? Is a non-redundant or a redundant power supply preferred?

• What is the ingress trunk type?

– The platform supports CT1, CE1, and CT3 ingress trunks.

• What cable or connector type is required to connect the trunks?

– Speciﬁc cable types such as DB15, RJ-45, BNC, etc. may be required to connect the E1/T1 trunks to the Cisco AS5350XM Universal

Gateway. The RJ-45 is sometimes referred to as RJ-48C.

• What trunk signaling is used?

– The Cisco AS5350XM Universal Gateway supports a variety of trunk signaling protocols, including T1 or E1 Primary Rate Interface (PRI),

channel associated signaling (CAS), and E1/R2. If using E1/R2 signaling, check with your Cisco representative to ensure that the platform

supports the country variant. A list of country variants supported is available at

http://www.cisco.com/en/US/products/hw/univgate/ps501/products_conﬁguration_guide_chapter09186a008007df5b.html - wp1081171.

– Signaling System 7 (SS7) signaling is also supported with the use of an external call agent such as the Cisco BTS 10200 Softswitch or the

Cisco PGW 2200 Softswitch.

• If T1 or E1 cables will be used for ingress, does the customer need the optional eight PRI breakout cable rack-mount bracket to organize cabling?

• Which of the following kinds of calls will be terminated on the platform?

– Voice calls, Voice Extensible Markup Language (VXML), modem calls, ISDN digital calls, wireless (V.110 or V.120) calls, or a

combination of these?

Produkt Specifikationer

Mærke:	Cisco
Kategori:	Ikke kategoriseret
Model:	AS5350XM
Effektkrav:	Single AC
Platform:	2CT1, 2CE1, 4CT1, 4CE1, 8CT1, 8CE1, CT3
Voice codecs:	G.728
I/O-porte:	2 E1
Varmeafgivelse:	573 BUT/t
Minimum RAM:	512 MB