Clarity C210 Manual

Clarity Telefon C210

Læs nedenfor 📖 manual på dansk for Clarity C210 (6 sider) i kategorien Telefon. Denne guide var nyttig for 6 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/6

UME

JK L

1 2 3

4 5 6

7 8 9

AB C

GH I MNO

WXYZPQRS TUV

OPER

MUTE

RE SE T

REDIALFLASH

DE F

TONE PULSE

UNPACKING THE CLARITY C210 PHONE

Inside you will ﬁnd the following items:

A. Handset

B. Handset Line Cord (Coiled, 10 ft.)

C. Base Unit

D. Phone Line Cord (long/short ﬂat)

Carefully remove all of the contents from the package. If there is any

visible damage, or any of the contents are missing, do not attempt to

operate this equipment.

Please call 1-800-552-3368 to exchange this unit for a factory-fresh

replacement.

In addition to the items listed above, you will need one of the following to

complete installation of this unit:

• Modular Wall Jack, or

• RJ-11C Modular Jack Adapter (if you have an older 4-prong jack)

INSTALLATION

Warning: To prevent electrical shock, always remove the telephone line

cord from the wall jack before removing the cord from the telephone.

Never leave the line cord connected to the wall jack if it is not also

connected to the telephone.

Select a Location:

• This unit requires a modular phone jack.

• The unit should be located in an area where it is easy to see the

lighted ringer.

• The unit can be used as a desk top phone or a wall mount phone.

Avoid placing the unit where it will be exposed to excessive heat

or humidity.

Connecting the Clarity C210 Phone:

To install as a Desk Unit:

• Plug one end of the telephone line cord (ﬂat) into the back of the

Clarity telephone.

• Plug the other end of the telephone line cord into the wall jack.

• Plug one end of the handset cord (coiled) into the bottom of the

handset.

• Plug the other end of the handset cord into the jack located on the

back of the Clarity telephone.

• Place the handset in the cradle of the Clarity telephone.

Note: If you are plugging the phone into an older 4-prong jack, use

an RJ11C adapter

B D

K L

1 2 3

4 5 6

7 8 9

ABC

GHI M

WXY

PQRSTUV

OP ER

MUT E

RE S ET

REDIA

ASH

DEF

Desk

Mount Key

Wall

Mount Key

Wall Plate

Back of Phone

Tabs

Hook Switch

To Install As a Wall Unit:

Important: A modular wall jack with raised mounting pins is required for

installation as a Wall Unit.

• Plug one end of the telephone line cord (ﬂat) into the back of the

Clarity telephone.

• Attach the bottom of the Clarity telephone to the modular wall jack

using the raised pins. It snaps into place.

• Plug the other end of the telephone line cord into the wall jack with

raised mounting pins

Warning: To prevent electrical shock, always unplug the telephone line cord

from the wall before removing the cord from the telephone. Never leave the

cord connected to the wall if it is not also connected to the telephone.

• Hold the Clarity telephone so that the holes on the wall plate line up

with the raised mounting pins on the modular wall jack. Once the

holes are lined up, push the phone in towards the wall jack and then

slide the phone downward until it is securely seated on the wall jack.

• Plug one end of the handset cord (coiled) into the bottom of the handset.

• Plug the other end of the handset cord into the jack located on the back of

the Clarity telephone.

• Place the handset in the cradle of the Clarity telephone. The special

tabs will hold it in place.

RJ-11C

Flat cord

here

Back of

Phone

JK L

1 2 3

4 5 6

7 8 9

AB C

GH IMNO

PQ RS T U

OPER

RE SET

DIA

LA SH

DE F

Coiled

cord here

CLARITY C210 FEATURES

1. Boost Button

2. Visual Ringer

3. Volume Control

4. Ringer ON/OFF

5. Tone/Pulse Selector

6. Reset Button

7. Flash Button

8. Mute Button

9. Braille Button #5 Key

10. Backlit Dialpad

11. Redial Button

Your Clarity C210 is packed with features that will help you

improve your communications over the telephone.

Clarity Power Control

The Clarity Power Control allows you to control the clarity of your phone

conversations. It will let you hear clearly phone calls that are normally

difﬁcult to understand. The ampliﬁcation will be increased by up to 30

decibels and the frequency band from 2000 to 3000Hz will be specially

enhanced to improve the clarity of your call.

Boost Control

The C210 has a boost button that controls the loudness of the receiver.

Once the boost button is pressed, the Clarity Power Control is activated.

The visual ringer will illuminate when the Boost Button is activated.

To Increase/Decrease Clarity Power: Adjust the volume control

wheel up or down.

WARNING: When Boost button is lit volume may be at a high level. To

protect hearing, lower volume control to minimum.

Visual Ringer

A lighted ringer sends out a visual ﬂashing alert every time a phone call is

coming in. (This ringer will light up regardless of the setting on the

ringer control.)

Backlit Dial Pad

The dial pad features translucent backlit buttons that will make

calling easier.

C210™ Corded Telephone User Guide

Featuring Clarity® PowerTM Technology

Tone/Pulse Selection

The Clarity C210 can be used as either a TONE (touch dial) or PULSE

(rotary dial) phone. Tone dialing is required for using special phone services

such as long distance calling. Please check with your local phone company

on certain types of service.

Note for Users with Pulse/Rotary service only: Many automated

answering systems used by banks, stores and government agencies ask

you to “Push 1 for service”, “Push 2 for the operator”, etc.

You must switch the tone/pulse switch on the phone to tone before

responding to these prompts. In summary, dial the phone number you want

to call in pulse mode, switch to tone mode to interact with the automated

answering system, switch back to pulse mode when your call is done. When

switching from Pulse to Tone during a call, there will be a 3 second delay

from the time you ﬁrst push a key in tone mode until the key press

is transmitted.

Important: You must have tone signaling service to use the TONE feature

on the Clarity telephone. If in doubt, contact your local telephone company.

To Set the TONE/PULSE Switch:

1. Move the switch towards the

correct setting.

2. Depress the hookswitch once.

3. The phone will now dial in the mode you selected.

Last Number Redial

Last Number Redial allows you to automatically redial the last telephone

number you called. This feature is convenient for redialing numbers which

are busy. The phone number stored for redial will be reset with every new

call you make.

To Operate Last Number Redial:

1. Depress the hookswitch to get a new dial tone.

2. Press the “Redial” Button once.

3. Stay on the line, and your call will be dialed.

The last number dialed will be stored in the Clarity telephone for you until

you dial another number.

Flash

Flash is a special feature that is required to use some calling services

provided by your local phone company, such as call waiting. Consult your

guide to these services which is available from your local phone company.

Flash serves the same purpose as pressing and releasing the hook switch

very quickly.

To Use the Flash Feature:

Simply press the Flash button at the appropriate time as outlined in the

guide provided by your local phone company.

Mute

The mute button allows the user to conduct a private conversation that you

do not want the person on the other end of the phone to hear. While the

mute button is depressed, the microphone in the handset will be deacti-

vated, preventing conversation from being transmitted.

Surge Protection

The unit is equipped with a resettable fuse. The fuse will automatically reset

within 30 minutes after activation once the surge condition has subsided.

Hearing Aid Compatibility

The Clarity C210 is Hearing Aid Compatible with hearing aids that utilize a

T- switch or T-coil.

Once you have installed your Clarity C210 according to the instructions

noted previously, it will be ready to use.

To Place or Receive a Call:

1. Adjust the volume control to its lowest setting.

2. Pick up the handset and listen for the caller’s voice or a dial tone.

3. When placing a call, dial as you would any phone and wait for

someone to answer.

4. Press the Boost Button

5. Adjust the volume control to a level where the other party’s voice

is heard loud and clear, and begin conversation.

6. When you complete the call, return the handset to the base unit.

7. After hanging up, the sound level will reset to normal level.

8. Pressing the Boost Button during subsequent conversations will

return the volume to your set sound level.

Note: If you made an error while dialing, just depress the hookswitch, listen

for a dial tone, and dial again.

CARE

The Clarity C210 has been designed to give you years of dependable service

with a minimum of care.

To ensure the utmost in performance, follow these guidelines in caring for

the unit:

• Avoid dropping or knocking the unit.

• Dust the unit regularly. Wipe the unit with a soft, damp cloth.

Do not use detergents and avoid excess moisture.

• The Clarity C210 is an electrical device. Avoid electric shock by

keeping the phone away from water. (i.e.: bathroom, kitchen sink, etc.)

SAFETY INSTRUCTIONS

Save these Instructions

Read and Understand All Instructions

1. Never install telephone wiring during a lightning storm.

2. Never install telephone jacks in wet locations unless the jack is

speciﬁcally designed for wet locations.

3. Never touch uninsulated telephone wires or terminals unless the line

has been disconnected at the network interface.

4. Use caution when installing or modifying telephone lines.

Important Safety Instructions

When using your telephone equipment, basic safety precautions should

always be followed to reduce the risk of ﬁre, electric shock and injury to

persons, including the following:

• Read and understand all instructions.

• Follow all warnings and instructions marked on the product.

• Unplug this product from the wall outlet before cleaning. Do not use

liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

• Do not use this product near water, for example, near a bath tub, wash

bowl, kitchen sink, or laundry tub, in a wet basement, or near a

swimming pool.

• Do not place this product on an unstable cart, stand or table. The prod-

uct may fall, causing serious damage to the product.

• Slots and openings in the cabinet and the back or bottom are provided

for ventilation, to protect it from overheating. These openings must not

be blocked or covered. The openings should never be blocked by placing

the product on the bed, sofa, rug, or other similar surface. This product

should never be placed near or over a radiator or heat register. This

product should not be placed in a built-in installation unless proper

ventilation is provided.

• Do not allow anything to rest on the power cord. Do not locate this

product where the cord will be abused by persons walking on it.

• Never push objects of any kind into this product through cabinet slots as

they may touch dangerous voltage points or short out parts that could

result in a risk of ﬁre or electric shock. Never spill liquid of any

kind on the product.

• To reduce the risk of electric shock, do not disassemble this product.

Opening or removing covers may expose you to dangerous voltages

or other risks. Incorrect reassembly can cause electric shock when the

appliance is subsequently used.

• Unplug this product from the wall outlet and refer servicing to the

manufacturer under the following conditions:

A. When the power supply cord or plug is damaged or frayed.

B. If liquid has been spilled into the product.

C. If the product has been exposed to rain or water.

D. If the product does not operate normally by following the

operating instructions.

Adjust only those controls that are covered by the operating instructions

because improper adjustment of other controls may result in damage and

will often require extensive work by a qualiﬁed technician to restore the

product to normal operation.

E. If the product has been dropped or the cabinet has been damaged.

F. If the product exhibits a distinct change in performance.

• Avoid using a telephone (other than a cordless type) during an electrical

storm. There may be a remote risk of electric shock from lightning.

• Do not use this telephone to report a gas leak in the vicinity of the leak.

The following items are included as part of the

CS-03 Requirements.

The Load Number of the equipment is 20.

The standard connecting arrangement code for the equipment is CA11A.

NOTICE: The Canadian Department of Communications label identiﬁes

certiﬁed equipment. This certiﬁcation means that the equipment meets

certain telecommunications network protective operational and safety

requirements. The Department does not guarantee that the equipment

will operate to the user’s satisfaction.

Produkt Specifikationer

Mærke:	Clarity
Kategori:	Telefon
Model:	C210

Har du brug for hjælp?

Hvis du har brug for hjælp til Clarity C210 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Telefon Clarity Manualer

Clarity E814CC Manual

2 September 2024

Clarity XLC3.5HS Manual

2 September 2024

Clarity D704HS Manual

2 September 2024

Clarity D702HS Manual

2 September 2024

Clarity D613HS Manual

2 September 2024

Clarity XL50 Manual

2 September 2024

Clarity Professional Manual

2 September 2024

Clarity C4230 Manual

2 September 2024

Clarity D712 Manual

2 September 2024

Clarity BT914 Manual

2 September 2024

Telefon Manualer

Nyeste Telefon Manualer

LG Fino Dual Manual

20 Oktober 2024

Profoon PDX-7020 Manual

14 Oktober 2024

Profoon PDX-100 Manual

14 Oktober 2024

Uniden XDECT 6105BTU Manual

10 Oktober 2024

OnePlus 9RT 5G Manual

8 Oktober 2024

Profoon PDX-1520 Manual

6 Oktober 2024

MT Logic TE-5740MTWG Manual

6 Oktober 2024

Swissvoice CP-30 Manual

5 Oktober 2024

Peaq PDP150 Manual

5 Oktober 2024

Belgacom Specifics 100 Manual

5 Oktober 2024