Clas Ohlson EU-TR8000 Manual

Clas Ohlson Fjernbetjening EU-TR8000

Læs nedenfor 📖 manual på dansk for Clas Ohlson EU-TR8000 (7 sider) i kategorien Fjernbetjening. Denne guide var nyttig for 45 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF
Side 1/7
GREAT BRITAIN
For consumer contact, please visit www.clasohlson.co.uk and click on customer service.
Ver. 200806
Remote Control Extender
Art.no 18-8037 / 38-2956
Model EU-TR8000
Please read the entire instruction manual before using the product
and save it for future reference.
We apologise for any text or photographic errors and any changes
of technical data.
If you have any questions concerning technical problems please
contact our Customer Service Department.
Safety
- The product should only be repaired by quali ed service personnel.
- The product should not be taken apart or modi ed.
- Do not place the product where it could fall into water or other
type of liquid. Do not place containers with liquid on the product
e.g.  ower vases, coffee cups, soft drink bottles, etc.
- Make sure that the outlet where the devices lead plug sits is
easily accessible since it is used to disconnect from the mains.
- Do not cover the product. Adequate ventilation with a distance
of at least 15 cm between ventilation holes and surrounding
area is necessary to prevent the device from becoming warm.
- Do not place the device in a damp, dusty environment or where
there occur strong vibrations.
Product Description
Wireless remote control extender
- Increases the remote control’s range
- Wireless transfer through walls and ceilings via a RF signal
- Range up to 25 m
Function
IR receiver
- IR receiver 18 ft
- Max. 5.5 metres
- Remote control
The IR receiver should be placed in the same
room the remote will be used.
The receiver takes signals from the remote
and changes these to radio signals and
resends them to the wireless IR transmitter.
A red LED indicates signal reception from
the remote.
IR transmitter
- IR transmitter
- Max. 5.5 metres
- TV, video, DVD, HiFi etc.
The IR transmitter should be placed in the
same room as the controlled device, e.g.
stereo or DVD player.
The transmitter receives signals from the
receiver, converts them back to IR signals
and resends these to the controlled device.
The IR transmitter is recognized by its
external IR diode connection and the aerial
on back.
External IR diode
The external IR diode is used when
the IR transmitter cannot be placed
in front of the controlled device. The
IR diode is then connected to the IR
transmitter and is positioned towards
the controlled device.
Installation
Installing the IR receiver
Placement:
Placed in the same room where the remote control will be used.
Installation:
1. Connect the adaptor to the connection marked DC 18 V on the
receiver and then to a power point.
2. Place the receiver in an appropriate place free of obstacles
between the receiver and remote. The receiver can be placed
up to 5.5 metres away from the remote when being used.
3. Aim the receiver’s front (logo facing you) towards the area
where you intend to use the remote.
Installing the IR transmitter
Placement:
In the same room as the controlled device.
Installation:
1. Connect the adaptor to the connection marked DC 18 V on the
transmitter and then to a power point.
2. Place the transmitter in an appropriate place free from
obstacles between the transmitter and the controlled device.
The transmitter can be place up to 5.5 metres from the
controlled device.
3. Extend the telescopic aerial and point the transmitter’s front
(logo facing you) towards the controlled device.
Using the external IR diode
The external IR diode is used when the IR transmitter cannot be
placed in front of the controlled device. The IR diode is then connect-
ed to the IR transmitter and is positioned facing the controlled device.
1. Connect the IR diode to the transmitter’s outlet.
2. Place the IR diode in front of the device in the near vicinity of
the controlled device’s IR sensor.
Operating Instructions
1. Aim the device’s remote towards the IR receiver.
2. Control the device’s functions as usual using the remote. A red
LED indicates signal reception from the remote.
Care and Maintenance
Use a soft damp cloth to clean the product. Never use solvents or
strong detergents.
Troubleshooting
Check the following if the remote control extender does not work:
- Make sure that both the transmitter and receiver are plugged in
and powered.
- The red LED on the IR receiver does not light when the remote
is used:
o Make sure that the remote is pointed directly towards the
front (the same side as the logo).
o Make sure that the distance between the remote and
receiver does not exceed 5.5 metres and that there are no
obstacles standing between the remote and receiver and
that no other interference is present. Try to move closer to
the receiver.
- The red LED on the IR transmitter lights when the remote is
used, but the controlled device does not respond:
o Make sure that the distance between the transmitter and
the controlled device does not exceed 5.5 metres and that
there are no obstacles between them.
o Make sure that the transmitter’s front is facing the
controlled device.
o Connect the external IR diode if the transmitter cannot be
placed in front of the controlled device.
- The red LED on the IR receiver lights when the remote is used,
but not the IR transmitter:
o Fully extend the aerial.
o Make sure that the distance between the transmitter
and receiver does not exceed 25 metres and that no
interference is present.
o Experiment by moving the transmitter and receiver to
another location and try again.
Disposal
When it is time to dispose of the product, dispose of it
according to your local ordinances. If you are unsure
please contact your municipality.
Specifications
Operating voltage 18 V DC, 100 mA via the adaptor
230 V AC, 50 Hz (included)
Range Up to 25 metres
(between transmitter and receiver)
Declaration of Conformity
Hereby, Clas Ohlson AB, declares that this wireless
infrared remote extender,
18-8037 & 38-2956
EU-TR8000
Consisting of
EU-T8000 (transmitter)
EU-R8000 (receiver)
is in compliance with the essential requirements and
other relevant provisions of Directive 1999/5/EC.
Article 3.1a (Safety): EN 60950
Article 3.1b (EMC): EN 301489-1
EN 301489-3
Article 3.2 (Radio): EN 300220-1
EN 300220-3
Insjön, Sweden, June 2008
Klas Balkow
President
Clas Ohlson, 793 85 Insjön, Sweden
ENGLISH

Produkt Specifikationer

Mærke: Clas Ohlson
Kategori: Fjernbetjening
Model: EU-TR8000

Har du brug for hjælp?

Hvis du har brug for hjælp til Clas Ohlson EU-TR8000 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Fjernbetjening Clas Ohlson Manualer

Clas Ohlson

Clas Ohlson BW6390 Manual

3 August 2024
Clas Ohlson

Clas Ohlson LR4 Manual

19 Juli 2024
Clas Ohlson

Clas Ohlson EU-TR8000 Manual

28 Oktober 2022
Clas Ohlson

Clas Ohlson BW6200 Manual

10 Oktober 2022

Fjernbetjening Manualer

Nyeste Fjernbetjening Manualer

Nanlite

Nanlite BT-BCS-48V3.5mm Manual

21 December 2024
SMK-Link

SMK-Link VP3700 Manual

17 December 2024
Metronic

Metronic ZAP 2 Unic - 495399 Manual

17 December 2024
Metronic

Metronic ZAP 3 - 495373 Manual

17 December 2024
Metronic

Metronic ZAP 3 - 495309 Manual

17 December 2024
Metronic

Metronic ZAP 3 - 495308 Manual

17 December 2024
Metronic

Metronic 495390 Manual

17 December 2024
Metronic

Metronic 495387 ZAP 3 Manual

17 December 2024
Metronic

Metronic ZAP 6 Manual

17 December 2024
EQ-3

EQ-3 HM-RC-19-B Manual

16 December 2024