Clas Ohlson PLSL-167A Manual

Clas Ohlson Boremaskine PLSL-167A

Læs nedenfor 📖 manual på dansk for Clas Ohlson PLSL-167A (10 sider) i kategorien Boremaskine. Denne guide var nyttig for 24 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/10

English

UNITED KINGDOM • customer service

tel: 020 8247 9300 customerservice@clasohlson.co.uk www.clasohlson.co.uk 10 – 13 Market Place, Kingston upon Thames, Surrey, KT1 1JZe-mail internet postal

Ver. 20181206

3.6 V Cordless Screwdriver

Art.no 18-3583, -1 Model PLSL-167A-UK

40-9710, -1 PLSL-167A

Please read theentire instruction manual before using theproduct and then

save it for future reference. We reserve theright for any errors in text or

images and any necessary changes made to technicaldata.

In theevent of technical problems or other queries, please contact our

Customer Services.

Safety

General safety instructions for cordless powertools

Warning: Readall theinstructions. Failure to comply with thefollowing

instructions can lead to electric shock, ﬁres and/or serious injury. Theterm

“power tool” in thewarning text below refers to your handheld mains

operated or battery operatedtool.

1) Theworkarea

a) Cluttered or dark areas invite Keep thework area clean and welllit.

accidents.

b) Do not operate power tools in explosive atmospheres, such as

in thepresence of ﬂammable liquids, gases ordust. Powertools

create sparks which may ignite dust orfumes.

c) Keep children and bystanders away while operating apowertool.

Distractions can cause you to lose control.

2) Electrical safety

a) Power tool plugs must match theoutlet. Nevermodify theplug

in anyway. Neveruse anadaptor plug together with earthed

powertools. Unmodiﬁed plugs and matching outlets will reduce

therisk of electric shocks.

b) Avoid body contact with earthed or grounded objects, such as

pipes, radiators, ovens or refrigerators. Thereis anincreased risk of

electric shock if your body is earthed.

c) Do not expose thepower tool to rain or other wet conditions.

Waterentering apower tool will increase therisk of electricshock.

d) Do not abuse themainslead. Neveruse thelead for carrying,

pulling or unplugging thepowertool. Keepthelead away from

heat, oil, sharp edges and movingparts. Damaged or tangled leads

increase therisk of electricshock.

e) When operating power tools outdoors, use anextension lead that

is suitable for outdooruse. Theuse of anextension lead designed for

outdoor use decreases therisk of electric shocks.

f) If operating apower tool in adamp location, use aresidual current

device (RCD) protected supply. Useof anRCD reduces therisk of

electricshock.

3) Personal safety

a) Stay alert, watch what you are doing and use common sense when

operating apowertool. Donot use power tools if you are tired or

under theinﬂuence of drugs, alcohol or medication. Onemoment of

inattention while using apower tool may result in serious injury.

b) Use personal protective equipment. Always wear eye protection.

Usingprotective clothing such as dust masks, non-slip safety shoes,

helmets and ear defenders when needed decreases therisk of injury.

c) Avoid unintentional starting. Makesure that thepower switch is

set to OFF before connecting to power source and/or batterypack.

Carrying power tools with your ﬁnger on theswitch/trigger or energising

power tools that have theswitch set to ON, invites accidents.

d) Remove all service tools/keys before switching thepower toolon.

Aservice tool left on arotating part of thepower tool may result in

personal injury.

e) Do not overreach. Keepproper footing and balance at alltimes.

Thiswill allow you to have more control in unexpected situations.

f) Dress properly. Donot wear loose-ﬁtting clothing or jewellery.

Keephair, clothes and gloves away from movingparts.

Looseclothes, jewellery or long hair can be caught in movingparts.

g) If equipment for dust extraction and collection is available, make

sure that it is connected and used properly. Useof dust collection

equipment can reduce dust related hazards.

4) Power tool use andcare

a) Do not force thepowertool. Usethecorrect power tool for your

application. Thecorrect power tool will do thejob better and safer if

used at therate for which it was designed.

b) Never use thepower tool if thepower switch does not switch

thetool on and off properly. Anypower tool that cannot be controlled

by thepower switch is dangerous and must be repaired.

c) Unplug thelead from thewall socket, before making any

adjustments, changing accessories or storing thepowertool.

Theseprecautions reduce therisk of thepower tool starting

unexpectedly.

d) Store idle power tools out of thereach of children and do not allow

people who are unfamiliar with thepower tool or these instructions

to operate thetool. Powertools are dangerous in thehands of

untrainedusers.

e) Maintaining powertools. Checkfor any incorrect settings, parts

that catch, broken parts or anything else which may cause

thepower tool to malfunction. Ifany damage is noticed, have

thepower tool repaired beforeusing. Manyaccidents are caused by

poorly maintained powertools.

f) Properly maintained cutting tools with Keep tools sharp andclean.

sharp blades are less likely to bind and are easier to control.

g) Use thepower tool, accessories and similar in accordance with

these instructions and in anappropriate way suitable for thetype

of power tool used, taking into account theworking conditions and

thework to be performed. Useof thepower tool for apurpose other

than that for which it is intended could result in adangerous situation.

5) Use and maintenance of cordless powertools

a) Make sure that thepower switch is set to OFF before attaching

thebattery. Attaching abattery to apower tool when thepower switch

set to ON is inviting anaccident.

b) Only charge thebattery using acharger approved by

themanufacturer. Acharger suitable for one type of battery can pose

aﬁre hazard if used for another type of battery.

c) Use power tools only with speciﬁcally designated batterypacks.

Theuse of other types of batteries might cause damage orﬁre.

d) When not in use, thebattery should be stored away from other

metal objects such as paper clips, coins, keys, nails, screws or

any small objects that could bridge thegap between thebattery

terminals. Shorting thebattery terminals together may cause burns or

aﬁre.

e) Mistreating thebattery may cause it to leakacid. Contact with

this acid should be avoided. Ifcontact accidentally occurs, ﬂush

withwater. Iftheacid contacts eyes, additionally seek medicalhelp.

Battery acid can cause irritation andburns.

6) Service

a) Have your power tool serviced by aqualiﬁed repair person using

only identical replacementparts.

Additional safety instructions for chargers and batteries

• Only use thesupplied charger to charge thescrewdriverwith.

• Never use thecharger for charging anything other than thescrewdriver

it was suppliedwith.

• Do not expose thescrewdriver to direct sunlight, ﬂames or other heat

source which might cause thescrewdriver to explode.

• Do not expose thescrewdriver or charger towater.

• Do not dismantle thescrewdriver as this may lead to short-circuiting

and therisk of explosion.

Responsible disposal

This symbol indicates that this product should not be disposed of

with general household waste. This applies throughout theentire

EU. In order to prevent any harm to theenvironment or health

hazards caused by incorrect waste disposal, theproduct must be

handed in for recycling so that thematerial can be disposed of in

aresponsible manner. When recycling your product, take it to your

local collection facility or contact theplace of purchase. They will

ensure that theproduct is disposed of in anenvironmentally sound manner.

In accordance with Directive 2012/19 /EU and 2006/66/EC,

all electrical waste, electronic equipment and batteries must

be collected and disposed of properly to reduce negative

environmental effects.

Built-in batteries must only be removed by service technicians that

have the requisite knowledge. An electric power tool can be irreparably

damaged if it is opened the wrong way.

To remove the battery:

• Activate the tool until the battery is completely discharged.

• Open the tool so that the battery becomes accessible.

• The battery terminals must be disconnected separately, one after the other.

The battery terminals must be isolated. This is to stop the residual current

in the battery from being released through a short circuit.

Produkt Specifikationer

Mærke:	Clas Ohlson
Kategori:	Boremaskine
Model:	PLSL-167A

Har du brug for hjælp?

Hvis du har brug for hjælp til Clas Ohlson PLSL-167A stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Boremaskine Clas Ohlson Manualer

Clas Ohlson PLSL-167A Manual

1 September 2023

Clas Ohlson DJC123-120 Manual

4 November 2022

Boremaskine Manualer

Nyeste Boremaskine Manualer

Festo DGSC-6-10-P-P Manual

17 November 2024

Black Decker KR506 Manual

14 November 2024

14 November 2024

14 November 2024

18 Oktober 2024

18 Oktober 2024

18 Oktober 2024

18 Oktober 2024

MSW -DDMWT-10L Manual

18 Oktober 2024

MSW -DDM230 Manual

18 Oktober 2024