COLBOR CL100-M Manual

COLBOR Lys CL100-M

Læs nedenfor 📖 manual på dansk for COLBOR CL100-M (2 sider) i kategorien Lys. Denne guide var nyttig for 3 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/2
SET RATE EFF CCT
POWER
SET RATE EFF CCT
POWER
SET RATE EFF CCT
POWER
SET RATE EFF CCT
POWER
CL100-M Video Light User Manual
Thank you for choosing COLBOR product. Please read this manual
carefully before use and follow all instructions mentioned herein.
Caring For Your COLBOR Product
Keep corrosive chemicals, liquids and heat source away from the product to
prevent mechanics damage.
The product is not waterproof.
Do not leave the product unattended while in use. Keep out of reach of
children.
Must remove the COB protective cover before use.
Do not handle with wet hands. Do not touch hot COB surface.
Please do not block the ventilation and do not look at the light directly when
it is on.
Do not attempt to disassemble or modify the product. Doing so voids
warranty.
Please have the product checked or repaired by authorized technicians if any
malfunctions happened.
Disconnect from the power supply when it is not in use.
Malfunction may be caused by dropping, impact of external force.
Failure to follow all the instructions may result in mechanics damage.
Warranty does not apply to human errors.
Product Instructions
① Bowens Mount Release Latch
② LED Display Screen
③ Settings Button
④ EFF Rate Option Button
⑤ Adjustment Dial
⑥ EFF Mode Button
⑦ CCT Mode / Power Button
⑧ Power Input
⑨ Umbrella Lock
⑩ Umbrella Input
⑪ Light Base Lock
⑫ Light Base
⑬ Direction Adjusting Handle
Operation Instructions
After selecting wireless connection in Settings menu, the
icon will be displayed dynamically.
The icon is always on to indicate successful pairing with
mobile APP.
The icon disappears to indicate mobile APP pairing
failure, or the product is unpaired.
Smart Mode. The product will adjust the fan speed
according to the internal detected temperature to ensure
that it is in optimal working condition.
Status Icon Description
1. Connect the power cord with the power adapter, plug the connector of
adapter into the xture’s Power Input
2. Plug it into an electricity supply
3. Long press the Power Button to turn on the light. Default Mode: CCT
4. Long press the Power Button to turn o the light.
① APP Connection Status Icon
② Fan Status Icon
Quiet Mode. The fan keeps running at low speed for
minimum noise, and overheating protection will be
activated if the product temperature is higher than the
alarm value.
None grouping status. The product defaults to the factory
status, and will not be aected by other groups.
If the icon is always on, it means that Repeater function
is turned on, and if the icon disappears, it means the
function is turned o.
If the icon ashes, it means that the internal temperature
of the product is too high, and cooling measures need
to be taken. If the icon disappears, it means that the
operation is normal.
③ Group Status Icon
④ Repeater Status Icon
⑤ Product Overheated Alarm Icon
A stands for Group A. There are six groups (A~F). T
stands for Tx.
A stands for Group A. There are six groups (A~F). R
stands for Rx.
A stands for Group A. There are six groups (A~F). TR
stands for TxRx.
Brightness (0%-100%)
CCT Mode (Short press CCT Mode Button to enter)
Brightness Control:
Interface Introduction
Roll the Dial clockwise to increase value, and anticlockwise to decrease value.
Rolling the Dial will enlarge the current setting parameter value, and it will
automatically return to the main screen after 1.5 seconds of no operation
RATE: Lv.1 - Lv.5
DIM: 0%-100%
CCT: 5600K
RATE: Lv.1 - Lv.5
DIM: 0%-100%
CCT: 5600K
RATE: Lv.1 - Lv.5
DIM: 0%-100%
CCT: 5600K
RATE: Lv.1 - Lv.5
DIM: 0%-100%
CCT: 5600K
Pulsing
Explosion
Strobe
Lightning
EFF
Rate
BrightnessSpecial Eect
Color Temperature
EFF Mode (Short press EFF Mode Button to enter)
Special Eect Switch: Short press EFF Mode Button
Interface Introduction
1. Roll the Dial clockwise to increase value, and anticlockwise to decrease
value.
2. Short press EFF Rate Option Button to choose eect rate.
Brightness / Rate Control:
RATE: Lv.1 - Lv.5
DIM: 0%-100%
CCT: 5600K
RATE: Lv.1 - Lv.5
DIM: 0%-100%
CCT: 5600K
RATE: LOCK
DIM: 0%-100%
CCT: 5600K
Faulty Bulb
Welding
SOS
EFF


Produkt Specifikationer

Mærke: COLBOR
Kategori: Lys
Model: CL100-M

Har du brug for hjælp?

Hvis du har brug for hjælp til COLBOR CL100-M stil et spørgsmål nedenfor, og andre brugere vil svare dig




Lys COLBOR Manualer

COLBOR

COLBOR CL120R Manual

30 November 2024
COLBOR

COLBOR CL100-M Manual

29 November 2024

Lys Manualer

Nyeste Lys Manualer

Nanlite

Nanlite MixPanel 150 Manual

29 November 2024
Nanlite

Nanlite FC-300B Manual

29 November 2024
Showtec

Showtec Typhoon 640 Manual

26 November 2024
Novy

Novy Wall 740201 Manual

25 November 2024
Novy

Novy Wall 740202 Manual

25 November 2024
Biltema

Biltema 46-3082 Manual

24 November 2024