COLBOR PL8B Manual

COLBOR Blitz PL8B

Læs nedenfor 📖 manual på dansk for COLBOR PL8B (2 sider) i kategorien Blitz. Denne guide var nyttig for 3 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/2
100% 6500K
CCT
Wireless Connection
Status Icon
Battery Life
Color Temperature
Brightness
① Power & Mode Switch Button
Long press for 3 seconds to turn on/o the product.
When the product is on, short press to switch between 2 light modes,
CCT and EFF mode.
② Dial
Long press down to make a wireless connection.
Roll upwards to increase value, and downwards to decrease value.
③ Brightness Control
For 0%~100% brightness adjustment.
④ Type-C DC Input
Used to charge this product and supports 5V 2A input at maximum.
Charging time varies depending on the power of the charger.
⑤ Type-A DC Output
Supports maximum output 5V 2A to power other devices. External power
supply will aect the runtime of the product itself.
Please prepare the corresponding charging cable by yourself to charge
① Color Temperature Control (2700K-6500K):
Roll the Dial upwards or downwards
CCT Mode
Bi-Color LED Light User Manual
Thank you for choosing COLBOR product. Please read this manual
carefully before use and follow all instructions mentioned herein.
PL8B
Caring For Your COLBOR Product Operation Instructions
Interface Introduction
Please keep the product in a dry, clean, dust-free environment.
Keep corrosive chemicals, liquids and heat source away from the
product to prevent mechanics damage.
Use only a soft and dry cloth for cleaning the product.
Malfunction may be caused by dropping, impact of external force.
Do not attempt to disassemble the product. Doing so voids warranty.
Please have the product checked or repaired by authorized technicians
if any malfunctions happened.
Please remove the USB charging cable when the battery is fully charged.
The product might get hot during use, which is normal. Please allow
certain space for heat-sink when using it.
If you do not use the product for a long time, it might not be able to
turn on instantly due to dead battery. Please charge the product and
it can resume to work. Please charge the product every 3 months
regularly.
Failure to follow all the instructions may result in mechanics damage.
Warranty does not apply to human errors.
other devices. The power management of dierent devices will control the
output voltage and current.
⑥ 1/4” Screw Hole
⑦ Cold Shoe
⑧ Display Screen
Wireless Connection:
1. Download COLBOR Studio APP from our website
2. Long press down the Dial on the light to make a wireless connection
with APP
Long press


Produkt Specifikationer

Mærke: COLBOR
Kategori: Blitz
Model: PL8B

Har du brug for hjælp?

Hvis du har brug for hjælp til COLBOR PL8B stil et spørgsmål nedenfor, og andre brugere vil svare dig