Crestron CEN-CI3-1-POE Manual


Læs nedenfor 📖 manual på dansk for Crestron CEN-CI3-1-POE (2 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 12 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/2
CEN-CI3-1
3-Series® Card Interface - 1 Slot
Installation Guide
Description
The Crestron® CEN-CI3-1 is a compact,
rack-mountable enclosure designed to provide a
versatile control interface and expansion solution using
any single 3-Series® Control Card. It is used to expand
the control ports of a 3-Series Control System
®.
Installation
The CEN-CI3-1 is designed to be placed on a shelf or
rack mounted using the optional ST-RMK Rack Mount
Kit (sold separately).
Mounting into a Rack
For rack mounting, use the 04-40 x 1/4” screws that
come with the ST-RMK to secure one or two
CEN-CI3-1 units to the ST-RMK.
Additional Resources
Visit the product page on the
Crestron website
(www.crestron.com) for additional
information and the latest rmware
updates.
Holes for Mounting to
ST-RMK Rack Mount Kit
CAUTION: The CEN-CI3-1 should be used in a
well-ventilated area. The venting holes on the sides
should not be obstructed.
Mounting onto a Flat Surface
When placing the CEN-CI3-1 onto a at surface or
stacking it with other equipment, attach the included
feet near the corners on the underside of the
CEN-CI3-1.
Communicating with the Control Card
A 3-Series Control Card must be installed in the
CEN-CI3-1 because communication is with the installed
card and not with the CEN-CI3-1 itself.
Communication can be via TCP/IP or USB.
CEN-CI3-1
CEN-CI3-1
ST-RMK


Produkt Specifikationer

Mærke: Crestron
Kategori: Ikke kategoriseret
Model: CEN-CI3-1-POE

Har du brug for hjælp?

Hvis du har brug for hjælp til Crestron CEN-CI3-1-POE stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Crestron Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer