Crestron CLX-DIN-AP3 Manual


Læs nedenfor 📖 manual på dansk for Crestron CLX-DIN-AP3 (2 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 8 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/2
CLX- - - - -DIN AP3 & CLX DIN AP3 HUB
Crestron Electronics, Inc. Installation Guide – BDOC. 7608
15 Volvo Drive Rockleigh, NJ 07647 (2038184)
Tel: 888.CRESTRON 01.14
Fax: 201.767.7576 Specifications subject to
www.crestron.com change without notice.
Introduction
The Crestron® - - -CLX DIN AP3 3 Series Control System
®
is designed for CAEN, CAEN CAENIB-MLO, and
A E utomation nclosures. There are two models. The
CLX- -DIN AP3 model includes a DIN- 3-AP3 Series
®
Automation Processor and - - DIN PWS30 277 Cresnet
®
Power Supply prewired and mounted on a
CAEN- UMP1X2 Universal Mounting Plate. Model
CLX- - - - DIN AP3 HUB includes the DIN HUB Cresnet
Distribution Hub as well.
Refer to the illustration on this page for an example of
mounting location and orientation within a single-wide
enclosure. The table beneath the illustration lists the
dimensions and weight.
The CLX- -DIN AP3 and CLX- - -DIN AP3 HUB install in
an identical manner. For simplicity within this guide, the
termCLX- - DIN AP3” is used except where noted.
Installation
The CLX- - DIN AP3 must be mounted in accordance with
all national and local codes.
NOTE: Adhere to Class Class 2 wiring 1 and
requirements when considering the equipment attached to
the CLX-D - IN AP3 in an enclosure.
Use the four screws (8B x 1/4, supplied) to attach the
CLX- - -DIN AP3 to a CAEN, CAEN MLO, or CAENIB
A E - -utomation nclosure. Mount the CLX DIN AP3 as
shown in the illustration on this page. The flanges of the
plates should not overlap other plates or lighting modules
that are mounted in the enclosure.
Once the CLX- -DIN AP3 is mounted to the automation
enclosure, two cables (supplied) must be connected as
shown in the illustration on this page. The 6 in (153 mm)
cable (4519362 the ) connects CAEN-BLOCK Cresnet
port 457to t -he DIN AP3 Cresnet port. The 18 in ( mm)
flat cable (4519661) connects the CAEN-BLOCK to the
CLX module connector.
For wiring of the CLX- - -DIN AP3, refer to the DIN AP3
Installation and Operations Guide (Doc. 7491) and
DIN-HUB Installation and Operations Guide (Doc. 6671)
at www.crestron.com/manuals.
Example of Location and OrCLX- -AP3- DIN HUB ientation
CLX- -AP3 DIN Specifications
SPECIFICATION
DETAILS
Height 7 3/8 8 in (18 mm)
Width 14 in (356 mm)
Depth 77 3 in ( mm)
Weight
- - CLX DIN AP3
- - - CLX DIN AP3 HUB
2.3 lb (1.1 kg)
2.7 lb (1.3 kg)
Further Inquiries
T o locate specific information or resolve questions after
reviewing this guide, contact Crestron's True Blue
Support at 1-888-CRESTRON [1- - -888 273 7876] or, for
assistance within a particular geographic region, refer to
the listing of Crestron worldwide offices at
www.crestron.com/offices.
To post a question about Crestron products, log onto
Crestron’s Online Help at www.crestron.com/onlinehelp.
First-time users must establish a user account to fully
benefit from all available features.
CLX Module
DIN-AP3
CAEN-BLOCK
DIN-HUB 6 in (153 mm)
Cable (4519362)
18 in (457 mm)
Flat Cable
(4519661)
DIN-PWS30-277


Produkt Specifikationer

Mærke: Crestron
Kategori: Ikke kategoriseret
Model: CLX-DIN-AP3

Har du brug for hjælp?

Hvis du har brug for hjælp til Crestron CLX-DIN-AP3 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Crestron Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Smeg

Smeg KIT6PX Manual

23 December 2024
Smeg

Smeg KIT6CX Manual

23 December 2024
Smeg

Smeg GTA-6 Manual

23 December 2024