CRUX RVCMB-78V Manual

CRUX Bakkamera RVCMB-78V

Læs nedenfor 📖 manual på dansk for CRUX RVCMB-78V (1 sider) i kategorien Bakkamera. Denne guide var nyttig for 8 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/1
MERCEDES BENZ
2016 Metris
2014 Up Sprinter (W906)
- Acvates the Rear View Camera funcon of the Audio15 radio.
- Mercedes Benz Audio15 Navigaon radio with or without Map Pilot
-78V OBD Coder MB
FAK-RCAF
Connect the video RCA of the aermarket rear-view camera to the female RCA connector of the FAK-RCAF cable.
Connect the Fakra plug of the FAK-RCAF cable the green Fakra socket of the Audio15 radio. to
1. Locate OBD-port and remove cover (commonly located under the dashboard on the driver side).
2. Turn ignion switch to ACC.
3. Turn on radio and wait unl the navigaon has booted.
4. Plug coder into OBD-port.
5. Leave the MB-78V coder plugged in the OBD port for about 30 seconds.
6. When the navigaon startup-screen shows, remove coder from OBD-port.
NOTE: If the radio does not power up aer 2 minutes, turn the key OFF, remove the key, open door and close
and wait another 2 minutes or unl the car has powered down. Insert the key and turn to the ON posion, the
radio and RVC should now work. Disconnect the OBDII coder and have the customer keep it in a safe place.
7. Your radio’s rear view camera feature is now enabled.
To remove the Rear- -6. Aer the rst use on a View camera feature from the navigaon’s menu repeat steps 1
vehicle, the RVCMB-78V coder is personalized to this vehicle. On this vehicle the enabling and removing of the
Rear-View camera feature can be repeated without limit.
1
2
FAK-RCAF
1
rev.050417


Produkt Specifikationer

Mærke: CRUX
Kategori: Bakkamera
Model: RVCMB-78V

Har du brug for hjælp?

Hvis du har brug for hjælp til CRUX RVCMB-78V stil et spørgsmål nedenfor, og andre brugere vil svare dig