CRUX RVCTY-71D Manual

CRUX Bakkamera RVCTY-71D

Læs nedenfor 📖 manual på dansk for CRUX RVCTY-71D (3 sider) i kategorien Bakkamera. Denne guide var nyttig for 10 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/3
- Plug and play connector for easy installation.
- Parking guide lines with On-Off feature.
- Mirror image capability for top mount of lip mount installation.
- Adjustable UP-DOWN camera lens angle.
TOYOTA
2012 – 2013 Tundra
INSTALLING THE CAMERA AND CABLE
1. Remove the tailgate cover.
2. On the right side of the tailgate handle, drill a hole using the hole saw provided.
3. Route the camera cable through the hole and secure the camera to the handle.
4. Connect the 4-Pin plug to the provided factory plug underneath the truck (near the spare tire) as the
cable is pre-ran for the camera from the factory.
5. Put the gear in reverse to test the camera.
6. Re-install the tailgate cover.
Rev.031417
1
4-Pin Connector near
the spare tire


Produkt Specifikationer

Mærke: CRUX
Kategori: Bakkamera
Model: RVCTY-71D

Har du brug for hjælp?

Hvis du har brug for hjælp til CRUX RVCTY-71D stil et spørgsmål nedenfor, og andre brugere vil svare dig