Crystorama Hayes HAY-1400-AG Manual

Crystorama Lettelse Hayes HAY-1400-AG

Læs nedenfor 📖 manual på dansk for Crystorama Hayes HAY-1400-AG (2 sider) i kategorien Lettelse. Denne guide var nyttig for 2 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/2
ASSEMBLY INSTRUCTION MODEL #HAY-1400-AG
LIGHTING THE WAY FOR SIXTY YEARS
All electrical components must be
installed by a licensed electrician
in accordance with the National
Electric Code and the appropriate
local electrical codes.
WARNING:
Electrical Danger Turn Power Off
R
CUL
You will need 4-Candelabra Base Bulb
40 Watts Recommended 60 Watts Max
USE LED BULBS FOR EXTENDED USE
How to Install
Crystal Sets
DETAILED ILLUSTRATION
The fixture is dry rated
1. Attach the mounting plate onto the outlet box using two
outlet screws.
2. Hang the frame onto the mounting plate by hooking the
cable wire into the slots as shown.
3. Install bulbs (not included) and proceed to connecting the
power.
4. Insert the pin into crystal and then Insert the crystal onto
the band ring.
5. After all the crystal are installed, raise the fixture up to
the ceiling and secure with the finial.
A
B
20 20
250
200
B 32Sets. (1)30x200mm
.
.
.
. .
A 21Sets. (1)30x250mm
.
.
.
..
AB
16"
10.25"
Pin


Produkt Specifikationer

Mærke: Crystorama
Kategori: Lettelse
Model: Hayes HAY-1400-AG

Har du brug for hjælp?

Hvis du har brug for hjælp til Crystorama Hayes HAY-1400-AG stil et spørgsmål nedenfor, og andre brugere vil svare dig




Lettelse Crystorama Manualer

Lettelse Manualer

Nyeste Lettelse Manualer