Crystorama Oakley OAK-7538-SG_CEILING Manual

Crystorama Lettelse Oakley OAK-7538-SG_CEILING

Læs nedenfor 📖 manual på dansk for Crystorama Oakley OAK-7538-SG_CEILING (2 sider) i kategorien Lettelse. Denne guide var nyttig for 2 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/2
32"
ASSEMBLY INSTRUCTION MODEL # OAK-7538-SG_CEILING
How to install
24.5"
2 Watts Recommended 3.5 Watts Max.
USE LED BULBS FOR EXTENDED USE
17"
3.35"
102.5"
22.3"
16.3"
For Hanging:
1.Using a screw driver, remove the three
screws on the light cluster that are
securing the circular ring in place.
2.Remove the circular ring and install the
LED G9 bulbs (included) then tighten
with the previously removed screws.
3.Feed the wire through the rods First remove.
the open hook on the long rod. Thread the
wire through the open hook and then
through the long rod. Finally, tighten the
open hook and the long rod together.
Repeat for the other .two long rod
4.Take the end of the rod with a open hook
And the other end onto the hook on loop kit.
5 Decide the preferred hanging height and.
choose the correct chain length needed.
For Ceiling:
1.Repeat step: # 1-2 above.
2.Repeat - , step #3 4 above changing the long
rod to short rod. Changing the pendant
canopy(B) to ceiling canopy(L).
and attach it to the top of the fixture frame.
You will need 8 -LED G9 Bulb
THIS FIXTURE IS DAMP RATED
Crystorama com.


Produkt Specifikationer

Mærke: Crystorama
Kategori: Lettelse
Model: Oakley OAK-7538-SG_CEILING

Har du brug for hjælp?

Hvis du har brug for hjælp til Crystorama Oakley OAK-7538-SG_CEILING stil et spørgsmål nedenfor, og andre brugere vil svare dig




Lettelse Crystorama Manualer

Lettelse Manualer

Nyeste Lettelse Manualer