CTA Digital ADD-BOXL Manual


Læs nedenfor 📖 manual på dansk for CTA Digital ADD-BOXL (1 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 6 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/1
ADD-BOX
SUPPORT@CTADIGITAL.COM
Locking Box Add-On
for CTA Digital Floor Stands
Package Contents:
Instructions:
1.Installing the Locking Box to the Floor Stand Pole
2.Adjusting the Locking Box Position
1.Remove gooseneck from base. This may require removing Y screw.
2. l b at top of pole. Place ocking ox over top of metal connection Be sure that the Locking Box is on the
opposite side of the pole as the Y screw on the gooseneck.
3. Reattach g ooseneck, then turn Y screw clockwise to tighten the connection.
1.Rotate the grip counter of the anti-
clockwise to loosen the inner pole,
adjust the height of the inner pole to,
adjust the locking box height, then
tighten the grip counter again.
2.Loosen the Y screw and ooseneck,g
rotate the ocking ox to adjustl b
the angle, then tighten the ooseneck g
and Y screw again.
Maximum Weight Loading:10lbs/5.0kgs
This product allows you to
lock the box (lock not included).


Produkt Specifikationer

Mærke: CTA Digital
Kategori: Ikke kategoriseret
Model: ADD-BOXL

Har du brug for hjælp?

Hvis du har brug for hjælp til CTA Digital ADD-BOXL stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret CTA Digital Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer