Cuisinart CCO-50 Manual
Cuisinart
Blikopener
CCO-50
Læs nedenfor 📖 manual på dansk for Cuisinart CCO-50 (6 sider) i kategorien Blikopener. Denne guide var nyttig for 16 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere
Side 1/6
CLEANING INSTRUCTIONS
1. Be sure plug has been removed from outlet.
2. Remove can opener lever by lifting and pulling
toward you. Use caution, as the blade will be
sharp.
3. Wash by hand with hot, soapy water
or place in the top shelf of a dishwasher.
Dry thoroughly.
4. Wipe body of can opener with damp cloth.
(Caution: Do not immerse in water.)
5. Replace can opener lever by holding in the raised
position and pushing back into place. Be sure the
lever is pushed all the way in.
SUGGESTIONS
This can opener will open all standard size cans.
It should not be used on cans that have alternate
methods of opening (including but not limited
to pull-tabs, rolling key and peel-off foil). It also
should not be used with rimless cans or cans with
angled corners.
Cans with aluminum lids will not adhere to magnet.
If there is a dent in the rim of the can, open other side
or place the Power Cut® blade beyond the dent. If the
can opener stalls, use a light touch to turn the can to
aid the cutting process.
Produkt Specifikationer
| Mærke: | Cuisinart |
| Kategori: | Blikopener |
| Model: | CCO-50 |
Har du brug for hjælp?
Hvis du har brug for hjælp til Cuisinart CCO-50 stil et spørgsmål nedenfor, og andre brugere vil svare dig
Blikopener Cuisinart Manualer
16 August 2024
15 August 2024
Blikopener Manualer
- Blikopener Rommelsbacher
- Blikopener Kenwood
- Blikopener Tefal
- Blikopener Hendi
- Blikopener Proctor Silex
- Blikopener Black And Decker
- Blikopener Clatronic
- Blikopener Bifinett
- Blikopener Hamilton Beach
- Blikopener Inventum
- Blikopener Brentwood
- Blikopener Arendo
- Blikopener Oster
- Blikopener Emga
- Blikopener Louis Tellier
- Blikopener Beautiful
Nyeste Blikopener Manualer
16 December 2024
14 Oktober 2024
8 September 2024
4 September 2024
1 September 2024
1 September 2024
1 September 2024
29 August 2024
29 August 2024
26 August 2024