CyberPower CSP600WSURC2 Manual


Læs nedenfor 📖 manual på dansk for CyberPower CSP600WSURC2 (1 sider) i kategorien niet gecategoriseerd. Denne guide var nyttig for 7 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/1
CAUTION
TO REDUCE THE RISK OF ELECTRIC SHOCK:
Use only in dry locations and only indoors.
DO NOT plug into another relocatable power tap.
DO NOTdaisy chain” surge protectors.
DO NOT use with any aquarium equipment.
DO NOT use if properly grounded outlets are not available.
DO NOT install this device if there is less than 10 meters (30 feet) of wire between
the electrical outlet and electrical service panel.
DO NOT use for medical or life support equipment. This device features an internal
protection that will disconnect the surge protective component at the end of its
useful life, but it will maintain unprotected power to the load.
FOR MORE INFORMATION
Visit CyberPowerSystems.com for more information regarding:
• Product information and certifications
• Product warranty
• Connected equipment guarantee
TECHNICAL SUPPORT
Visit: CyberPowerSystems.com/support
Toll-Free: 1-877-297-6937
© 2022 Cyber Power Systems (USA), Inc. All rights reserved.
All other trademarks are the property of their respective owners.
FEATURES
1.
1.
1.
1.1. Surge Protected Indicator
Illuminated when the surge protection feature is working
properly.
2.
2.
2.
2.2. Ground Indicator LED
Illuminated when the .unit is properly grounded
3.
3.
3.
3.3. Pivoting Grounded Outlets (6)
Pivoting outlet for ease of use and convenience, banks
fits standard-sized plugs.
4.
4.
4.
4.4. USB Charging Ports*
Connect and charge up to two (2) USB devices using the
surge protected USB charging ports. *USB outlets cannot
be used as a USB hub. This device does not transfer data.
TROUBLESHOOTING
If the grounded indicator does not light when you plug in the surge protector,
move the surge protector to a dierent grounded three-prong AC outlet. If it
still does not light, return the product to the retailer for assistance. If the surge
protector appears to be working properly, your outlets may not be properly
grounded and need to be repaired by a professional electrician.
If the protected indicator does not light, the surge protector’s AC lines are no
longer protected from surge. The surge protector may have received a power
surge or spike beyond its specified limits that overloaded the protection circuitry
and rendered it inactive. The surge protector has protected your connected
equipment as designed, but it will not protect against future surges and
spikes. t should be replaced. I
1
2
33
4
YOUR ULTIMATE ALLY IN POWER
6-OUTLET
SURGE PROTECTOR
with 2 USB PORTS
CSP600WSURC2
USER MANUAL
Cyber Power Systems (USA), Inc.
4241 12th Avenue East, Suite 400 | Shakopee, MN 55379
CyberPowerSystems.com
SPECIFICATIONS
Model Number: CSP600WSURC2
AC Outlets: 6 Standard Outlets
Surge Suppression: 1200 Joules
USB-A Ports: 2
USB-A Charging Rating: 5 V/2.4 A total
Electrical Rating: 125 V/15 A/1875 W
Clamping Voltage: UL 1449 3rd/400 V (H-N, N-G),
500 V (H-G)
Maximum Peak Current: 60,000 A
3 AC Lines Protected: H-N: 30,000 A, H-G: 15,000 A,
N-G: 15,000 A;
(The maximum surge possible on
household wiring is 6,000 volts)
Response Time: Less than 1 nanosecond
Attenuation: Up to 32 dB
EMI/RFI Filtration: 150 kHz to 100 MHz
i WARNING: This product can expose you to chemicals including bisphenol A (BPA)
and styrene (ABS), which is known to the State of California to cause reproductive
harm and cancer. For more information, go to www.P65Warnings.ca.gov.
CONFORMANCE APPROVALS
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may
cause undesired operation.
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interfer-
ence to radio or television reception, which can be determined by
turning the equipment o” and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit di”erent from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
WARNING: Changes or modifications not expressly approved by the
party responsible for compliance could void the user’s authority to
operate the equipment.


Produkt Specifikationer

Mærke: CyberPower
Kategori: niet gecategoriseerd
Model: CSP600WSURC2

Har du brug for hjælp?

Hvis du har brug for hjælp til CyberPower CSP600WSURC2 stil et spørgsmål nedenfor, og andre brugere vil svare dig




niet gecategoriseerd CyberPower Manualer

niet gecategoriseerd Manualer

Nyeste niet gecategoriseerd Manualer