CyberPower Essential CSB7012 Manual

CyberPower Ikke kategoriseret Essential CSB7012

Læs nedenfor 📖 manual på dansk for CyberPower Essential CSB7012 (3 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 17 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/3

CONGRATULATIONS ON YOUR PURCHASE

Thank you for selecting the CyberPower

CSB706/CSB7012 Surge Protector. This manual explains

the features and operation of the CSB706/CSB7012.

Please take a few moments to read this manual.

FEATURES

1. ON/OFF Reset Control Switch and Circuit Breaker

Controls power to all outlets. The switch is also a 15 A

breaker. When an overload occurs, it will automatically

switch o. To resume operation, ensure the overload

condition is removed and reset the surge protector by

switching the unit ON.

2. Surge Protected Indicator

Illuminated when the surge protection feature is

working properly.

3. Seven Standard Outlets

SPECIFICATIONS

• Model Number: CSB706/CSB7012

• Outlets: 7 Stnadard Outlets

• Surge Protection: 1500 Joules

• Electrical Rating: 125 V/15 A/1875 W

• UL Clamping Voltage: UL 1449 3rd/500 V (H-N, H-G, N-G)

• Maximum Peak Current: 60,000 A

• 3 AC Lines Protected: H-N: 30,000 A, H-G: 15,000 A,

N-G: 15,000 A

• Response Time: Less than 1 nanosecond

• Attenuation: Up to 32 dB

• Circuit Breaker: Resettable 15 Amp

• EMI/RFI Filtration: 150 kHz to 100 MHz

CAUTION

TO REDUCE THE RISK OF ELECTRIC SHOCK - Use only

in dry locations and only indoors. DO NOT plug into

another relocatable power tap. DO NOT “daisy chain”

surge protectors. use with any aquarium DO NOT

equipment. DO NOT use if properly grounded outlets are

not available. DO NOT install this device if there is less

than 10 meters (30 feet) or more of wire between the

electrical outlet and electrical service panel. DO NOT use

for medical or life support equipment. This device

features an internal protection that will disconnect the

surge protective component at the end of its useful life,

but it will maintain unprotected power to the load.

TROUBLESHOOTING

▪ If the ON/OFF is switched OFF, the 15 Amp circuit

breaker may have tripped. Examine your connected

equipment and remove the device that is overloading the

circuit. Then, turn the ON/OFF switch back to RESET.

▪ If the protected indicator does not light, the surge

protector’s AC lines are no longer protected from surge.

The surge protector may have received a power surge

or spike beyond its speciﬁed limits that overloaded the

protection circuitry and rendered it inactive. The surge

protector has protected your connected equipment as

designed, but it will not protect against future surges,

and spikes. It should be replaced.

TECHNICAL SUPPORT

Please contact our Tech Support Department with

installation, troubleshooting, or general product questions.

• Phone: 1-877-297-6937

• Email: tech@cpsww.com

• Hours of Operation:

Monday – Friday 7:00am – 6:00pm CST

USER MANUAL

7-Outlet Surge Protector

CSB706/CSB7012

7-Outlet Surge Protector

CSB706/CSB7012

Produkt Specifikationer

Mærke:	CyberPower
Kategori:	Ikke kategoriseret
Model:	Essential CSB7012
Tænd-/slukkontakt:	Ja
Produktfarve:	Sort
Fjernbetjening inkluderet:	Ingen
LED-indikatorer:	Strøm
Kabellængde:	3.658 m
Bæredygtighedscertifikater:	RoHS
Strømstik:	NEMA 5–15P
Nominel indgangsspænding:	125 V
AC udgange, antal:	7 AC stikkontakt(er)
AC stikkontakt typer:	NEMA 5–15R
Overspænding energivurdering:	1500 J
Nominel udgangsstrøm:	15 A
Spændingsblokering:	400 V