CyberPower HT812TC Manual


Læs nedenfor 📖 manual på dansk for CyberPower HT812TC (2 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 6 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/2
CONGRATULATIONS ON YOUR PURCHASE
Thank you for selecting the CyberPower HT806TCRC1/HT812TC
Surge Protector. This manual explains the features and operation
of the HT806TCRC1/HT812TC. Please take a few moments to read
this manual.
FEATURES
1. ON/OFF Reset Control Switch and Circuit Breaker
Controls power to all outlets. The switch is also a 15 A breaker.
When an overload occurs, it will automatically switch o.
To resume operation, ensure the overload condition is
removed and reset the surge protector by switching the unit ON.
2. Ground Indicator LED
Illuminated when the ground protection feature is
working properly.
3. Surge Protected Indicator
Illuminated when the surge protection feature is
working properly.
4. Standard Grounded Outlets (4) and Transformer-spaced
Grounded Outlets (4) with Safety Covers
Slide the plastic outlet cover over outlets that are not used.
This ensures the safety of children and prevents potential electric
shocks and damage caused by highly dusty environments.
5. Surge Protected Data Line Connections
Protect your equipment from surge along phone lines.
A. Connect the phone line from wall outlet to the “In” port.
B. Connect the phone lines to the “Out” ports.
6. Surge Protected Cable and Satellite Connections
Protect coaxial lines from surges and spikes.
SPECIFICATIONS
• Model Number: HT806TCRC1 / HT812TC
Standard Grounded Outlets (4) and Outlets:
Transformer-spaced Grounded Outlets (4)
• Power Cord Length: 6 ft / 12 ft
• Plug Type: Low-Profile Right-Angle Plug
• Surge Protection: 4,350 Joules
• Electrical Rating: 125 V/15 A/1875 W
• UL Clamping Voltage: UL 1449 4th/500 V (H-N, H-G, N-G)
• Maximum Peak Current: 150,000 A
• 3 AC Lines Protected: H-N: 90,000 A, H-G: 30,000 A, N-G:
30,000 A (The maximum surge possible on household wiring
is 6,000 volts)
• Response Time: Less than 1 nanosecond
• Attenuation: Up to 58 dB
• Telecommunications Protection: RJ11 1 in/2 out
• Coaxial Communications Protection: Cable (Coaxial) 1 pair
• EMI/RFI Filtration: 150 kHz to 100 MHz
• Circuit Breaker: Resettable 15 Amp
CAUTION
TO REDUCE THE RISK OF ELECTRIC SHOCK - Use only in dry
locations and only indoors. DO NOT plug into another relocatable
power tap. DO NOT “daisy chain” surge protectors. use DO NOT
with any aquarium equipment. DO NOT use if properly grounded
outlets are not available. install this device if there is less DO NOT
than 10 meters (30 feet) or more of wire between the electrical
outlet and electrical service panel. DO NOT use for medical or life
support equipment. This device features an internal protection that
will disconnect the surge protective component at the end of its
useful life, but it will maintain unprotected power to the load.
TROUBLESHOOTING
If the ON/OFF is switched OFF, the 15 Amp circuit breaker may
have tripped. Examine your connected equipment and remove
the device that is overloading the circuit. Then, turn the
ON/OFF switch back to RESET.
If the grounded indicator does not light when you plug in the
surge protector, move the surge protector to a dierent
grounded three-prong AC outlet. If it still does not light, return
the product to the retailer for assistance. If the surge protector
appears to be working properly, your outlets may not be
properly grounded and need to be repaired by a professional
electrician. If the grounded indicator turns o after a period
of use, the surge protection has been depleted. Replace your
surge protector.
If the protected indicator does not light, the surge protector’s
AC lines are no longer protected from surge. The surge
protector may have received a power surge or spike beyond
its specified limits that overloaded the protection circuitry and
rendered it inactive. The surge protector has protected your
connected equipment as designed, but it will not protect
against future surges, and spikes. It should be replaced.
TECHNICAL SUPPORT
Please contact our Tech Support Department
with installation, troubleshooting, or general
product questions.
• Phone: 1-877-297-6937
• Email: tech@cpsww.com
• Hours of Operation:
Monday – Friday 7:00am – 6:00pm CST
USER MANUAL
8-Outlet Home Theater
Surge Protector
HT806TCRC1 / HT812TC
8-Outlet Home Theater
Surge Protector
HT806TCRC1 / HT812TC
1 2
Copyright © 2019 Cyber Power Systems (USA), Inc. All rights reserved.
2
3
Out/SortieOut/Sortie
Coax
Out/Sortie
Grounded
Mise à la terre
Protected
1
4
5
6


Produkt Specifikationer

Mærke: CyberPower
Kategori: Ikke kategoriseret
Model: HT812TC

Har du brug for hjælp?

Hvis du har brug for hjælp til CyberPower HT812TC stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret CyberPower Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

MSW

MSW -RF15S Manual

25 December 2024
MSW

MSW -HFCV-A7 Manual

25 December 2024
MSW

MSW -HFCV-A5 Manual

25 December 2024
MSW

MSW -LRL2T-1 Manual

25 December 2024
MSW

MSW -HFCV-A6 Manual

25 December 2024
Philips

Philips SWF2620 Manual

25 December 2024
Philips

Philips 13BDL4150IW Manual

25 December 2024
Vivax

Vivax TS-950B Vintage Manual

24 December 2024