CyberPower MP60BK Manual


Læs nedenfor 📖 manual på dansk for CyberPower MP60BK (1 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 96 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/1
USER MANUAL
Surge Protection
Multi-Pack
MP60BK/MP61WH/MP62BL
Surge Protection
Multi-Pack
MP60BK/MP61WH/MP62BL
Copyright © 2019 Cyber Power Systems (USA), Inc. All rights reserved.
CONGRATULATIONS ON YOUR PURCHASE
Thank you for selecting the CyberPower MP60BK/MP61WH/
MP62BL Surge Protection Multi-Pack. This manual explains the
features and operation of the Surge Protection Multi-Pack.
Please take a few moments to read this manual.
3-Outlet Extension Cord
with 2 USB Ports
P303UBK/P303U/P303UBL
EXTENSION CORD INSTRUCTIONS
1. Plug the extension cord into a standard grounding wall receptacle by fully
inserting the plug and ensure that there are no exposed conductors.
2. Make sure the electronic equipment is turned o before plugging into the
extension cord outlets. Do not use extension cords to connect equipment
to the extension cord.
FEATURES
1. Standard Grounded Outlets (3)
2. USB Charging Ports* (2)
Connect and charge up to two (2) USB devices using the surge protected
USB charging ports.
*USB outlets cannot be used as a USB hub. This device does not
transfer data.
SPECIFICATIONS
• Model Number: P303UBK/P303U/P303UBL
• Outlets: Standard Grounded Outlets (3)
• Surge Protection: 350 Joules
• Electrical Rating: 125 V/13 A/1625 W/60 Hz
• USB Charging Rating: 5 V/2.4A shared
• UL Clamping Voltage: UL 1449 4th/900 V (L-N)
CAUTION
TO REDUCE THE RISK OF ELECTRIC SHOCK - Use only in dry locations and
only indoors. plug into another relocatable power tap. DO NOT DO NOT
“daisy chain” extension cords. use with any aquarium equipment. DO NOT
DO NOT use if properly grounded outlets are not available. install DO NOT
this device if there is not at least 10 meters (30 feet) or more of wire
between the electrical outlet and electrical service panel. This device
features an internal protection that will disconnect the surge protective
component at the end of its useful life, but will maintain power to the load
now unprotected. If this situation is undesirable for the application, follow
the manufacturer’s instructions for replacing the device. The conductors
used to connect the SPD to the line or bus and to ground shall not be any
longer than necessary and shall avoid unnecessary bends. plug DO NOT
devices over 2.4A to each USB port.
2-Outlet Surge Protector
P2WUBK/P2WU/P2WUBL
FEATURES
1. Surge Protected Indicator
Illuminated when the surge protection feature is working properly.
2. USB Charging Ports* (3)
Connect and charge up to three (3) USB devices using the surge
protected USB charging ports.
*USB outlets cannot be used as a USB hub. This device does not
transfer data.
3. Side-Facing Standard Grounded Outlets (2)
SPECIFICATIONS
• Model Number: P2WUBK/P2WU/P2WUBL
• Outlets: Standard Grounded Outlets (2)
• USB Charging Rating: 5 V/4.2A total
• Surge Protection: 600 Joules
• Electrical Rating: 125 V/15 A/1875 W
• UL Clamping Voltage: UL 1449 4th/800 V (L-N)
• Maximum Peak Current: 15,000 A
• AC Lines Protected: L-N: 15,000 A
• Response Time: Less than 1 nanosecond
CAUTION
TO REDUCE THE RISK OF ELECTRIC SHOCK - Use only in dry locations and
only indoors. plug into another relocatable power tap. DO NOT DO NOT
“daisy chain” surge protectors. use with any aquarium equipment. DO NOT
DO NOT use if properly grounded outlets are not available. install DO NOT
this device if there is less than 10 meters (30 feet) or more of wire between
the electrical outlet and electrical service panel. use for medical or DO NOT
life support equipment. This device features an internal protection that will
disconnect the surge protective component at the end of its useful life, but it
will maintain unprotected power to the load.
TROUBLESHOOTING
If the protected indicator does not light, the surge protector’s AC lines are
no longer protected from surge. The surge protector may have received a
power surge or spike beyond its specified limits that overloaded the
protection circuitry and rendered it inactive. The surge protector has
protected your connected equipment as designed, but it will not protect
against future surges, and spikes. It should be replaced.
Front
1
Side
2
Top
2
33
2
1


Produkt Specifikationer

Mærke: CyberPower
Kategori: Ikke kategoriseret
Model: MP60BK

Har du brug for hjælp?

Hvis du har brug for hjælp til CyberPower MP60BK stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret CyberPower Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Dubatti

Dubatti Board One Manual

21 November 2024
D-Link

D-Link DWA-142 Manual

21 November 2024
Senal

Senal CSP-142 Manual

21 November 2024
Senal

Senal SCI-3212 Manual

21 November 2024
Senal

Senal AWS-24G Manual

21 November 2024
Senal

Senal SCM-600 Manual

21 November 2024
Worx

Worx WX891L.9 Manual

20 November 2024
ENTES

ENTES SER-YU Manual

20 November 2024
Worx

Worx WX891L Manual

20 November 2024