D-Link DPE-301GS Manual

D-Link Splitter DPE-301GS

Læs nedenfor 📖 manual på dansk for D-Link DPE-301GS (3 sider) i kategorien Splitter. Denne guide var nyttig for 4 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF
Side 1/3
Gigabit PoE+ Splitter
DPE-301GS
The DPE-301GS Gigabit PoE+ Splitter provides Gigabit connectivity and high wattage
electrical power to legacy devices that do not support PoE, by separating power and data
from a PoE source. Compliant with the 802.3at and 802.3af PoE standards, it can eectively
turns any device into a PoE device, giving you the ability to mount your non-PoE device
virtually anywhere in a building since it doesn’t require a power outlet.
Power a Wider Range of Devices
Remotely connect and power a wide variety of power demanding devices with the
DPE-301GS. The DPE-301GS outputs up to 5VDC, 9VDC, or 12VDC, making it better able
to cope with the demands of multi-feature surveillance cameras, 802.11ac wireless access
point, network switches and security equipment.
Greater Deployment Flexibility
Network administrators can use the DPE-301GS to deploy wireless access points and
network cameras in hard-to-reach places such as entryways, rooftops, ceilings or any
other location not in close proximity to a power outlet. This means that administrators can
position network devices where they will be most eective, rather than having to settle for
less desirable locations due to the limited availability of power. Avoiding the need to use
unsightly extension cables, or the hassle and expense of installing new electrical wiring.
Reliable Connectivity
With built-in overcurrent protection and high eciency DC-DC converter, the DPE-301GS
oers output short-circuit protection to avoid damaging the connected device.
Features
Simplicity
• Plug-and-Play, so no software required
• Reduces installation and network equipment
costs by removing the need for electrical wiring
• Provides power over existing network cabling
when paired with a Power Source Equipment
(such as the DPE-301GI) to a non-PoE device
Flexible Power Options
• Separates a PoE Ethernet cable into DC power
and a standard Ethernet cable
• Supports 5 V, 9 V, and 12 V output voltages
• Transforms incoming AC power to low-voltage
DC power
Gigabit Connectivity
• Receives power up to 100 metres away1
• Connect your devices at Gigabit speeds
• Auto-negotiation on Ethernet port
Reliability
• IEEE 802.3at (PoE+) and IEEE 802.3af (PoE)
compliant
• Compatible with all standard PoE devices and
restricts power input to avoid damaging Power
Sourcing Equipment (PSE)
• Overcurrent protection
More Power with PoE+
Bring the benets of more powerful IEEE 802.3at
PoE+ to non-PoE devices with this compact and cost-
eective PoE solution
Flexible Deployment
Install non-PoE devices in locations where there are
no outlets without using extension cords or installing
electrical infrastructure
Easy to Setup
Install devices easily by simply setting the correct
output voltage (5 V, 9 V, or 12 V) and plugging in
Ethernet cables; no additional software is required
Product Highlights

Produkt Specifikationer

Mærke: D-Link
Kategori: Splitter
Model: DPE-301GS

Har du brug for hjælp?

Hvis du har brug for hjælp til D-Link DPE-301GS stil et spørgsmål nedenfor, og andre brugere vil svare dig


Splitter D-Link Manualer

D-Link

D-Link DPE-301GS Manual

28 September 2024

Splitter Manualer

Nyeste Splitter Manualer

Audio-Technica

Audio-Technica ATW-49SP Manual

27 September 2024
IFM

IFM EBC113 Manual

24 September 2024
Fujitsu

Fujitsu ASHG09LTCA Manual

19 September 2024
Fujitsu

Fujitsu ARYG60LHTA Manual

17 September 2024
Fujitsu

Fujitsu ARYG54LHTA Manual

14 September 2024
Fujitsu

Fujitsu Designer ASYG07KGTB Manual

10 September 2024
Fujitsu

Fujitsu ASHG07KPCA Manual

9 September 2024
IFM

IFM EBC118 Manual

7 September 2024
Fujitsu

Fujitsu ASEG18KMTE Manual

6 September 2024
Fujitsu

Fujitsu ASEG24KMTE Manual

6 September 2024