D-Link SharePort Go II DIR-508L Manual

D-Link Adgangspunkt SharePort Go II DIR-508L

Læs nedenfor 📖 manual på dansk for D-Link SharePort Go II DIR-508L (4 sider) i kategorien Adgangspunkt. Denne guide var nyttig for 24 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/4

DIR-508L

SharePort™ Go II

Wireless N300 Portable Router

and Charger

If any of the above items are missing, please contact your reseller.

Package Contents

• DIR-508L Portable Router

• 4000 mAh Li-ion battery

• Power Adapter

• Quick Install Guide

Thank you for purchasing the DIR-508L Portable Router and

Charger. Follow the easy steps in this guide to properly set

up your router.

Quick Install Guide

LED Color Status Description

Power/Status

LED

Green

Solid The device is connected to the Internet and properly

working.

Blinking The device is processing WPS.

Orange

Solid Device is powering up.

Blinking

Cannot connect to the Internet or receive an IP address

from the uplink side. This may also indicate that the device

is in recovery mode.

Red Solid The device is defective.

O Device is turned o or in charging mode.

Battery LED

Green Solid Battery is at 80% or higher capacity.

Orange Solid Battery is between 15% and 80% capacity.

Red Solid Battery is lower than 15% capacity.

Blinking Battery is malfunctioning.

O Charging completed. (adapter plugged)

Out of battery.

Reset Button

SD Card Slot

Power Port Internet Port

USB Port

WPS Button

Mode Switch

Up = On

Middle = O

Down = Charger

Power/Status

Battery

Product Overview Charge and Connect

1 4

Make sure the DIR-508L is charged* or plugged in before using.

2Slide the mode switch up to On. Allow

one minute for the device to boot up.

OFF

Cha rger

3From your device’s wireless utility, connect to the DIR-508L.

The default network name (SSID) is DIR508L with no password.

* Actual usable capacity may vary depending on charging conditions.

Open a web browser (e.g., Internet Explorer, Firefox,

Chrome, or Safari) and go to http://dlinkrouter.local./

(or http://192.168.0.1).

At the login screen, click or press

the Log in button (no password).

Click or press the ! icon to select a wireless network (HotSpot

Mode). You may instead connect an Ethernet cable from an

Internet source such as a broadband modem to the Internet

port (see note below).

Note: If you are connecting directly to a broadband modem and are using either PPPoE or a

static IP connection, click or press Settings Internet Proles > and create a new prole with your

Internet connection type. A dynamic connection (e.g., Cable) will connect automatically without

conguration.

Please refer to the user manual available at http://www.dlink.com/DIR-508L for more

information.

Produkt Specifikationer

Mærke:	D-Link
Kategori:	Adgangspunkt
Model:	SharePort Go II DIR-508L
Vekselstrømsindgangsspænding:	5 V
Bredde:	59 mm
Dybde:	19.8 mm
Højde:	124 mm
Vægt:	190.5 g
Opbevaringstemperatur (T-T):	-20 - 65 °C
Relativ luftfugtighed ved drift (H-H):	10 - 90 %
Relativ luftfugtighed ved opbevaring (H-H):	5 - 95 %
Antal USB 2.0-porte:	2
Driftstemperatur (T-T):	0 - 40 °C
Ethernet LAN-datahastigheder:	10,100 Mbit/s
Sikkerhedsalgoritmer:	128-bit WEP,64-bit WEP,WPA,WPA2,WPS
Certificering:	CE\nFCC\nUL\nLVD\nIPv6\nDLNA\nWi-Fi Certified
Kabelteknologi:	10/100Base-T(X)
Netværksstandarder:	IEEE 802.11b,IEEE 802.11g,IEEE 802.11n,IEEE 802.3,IEEE 802.3u
Webbaseret administration:	Ja
WPS trykknap:	Ja
LED-indikatorer:	Ja
Frekvensbånd:	2.4 - 2.4835 GHz
Grænseflade:	USB, microUSB, SD-slot
Intern:	Ingen
Maksimal dataoverførselshastighed:	300 Mbit/s
Antenne type:	Intern
Indgangsstrøm:	1.5 A
Strøm over Ethernet (PoE):	Ingen
Filtrering af MAC-adresser:	Ja
2.4 GHz:	Ja
WAN-forbindelse:	Ethernet (RJ-45)
Netværksfunktioner:	WAN, WLAN
Sikkerhedsfunktioner:	Network address translation (NAT), Stateful packet inspection (SPI)