Dahle CleanTEC 41534 Manual

Dahle Papirmakulator CleanTEC 41534

Læs nedenfor 📖 manual på dansk for Dahle CleanTEC 41534 (1 sider) i kategorien Papirmakulator. Denne guide var nyttig for 5 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/1
Authorized Dealer
®
®
All performance data has been established using #20 / #16 bond 8 ¹/" x 11" paper. Different paper qualities may yield different results.
In order to protect our National Security, mil-
itary and government agencies require higher
levels of security from their paper shredders.
e DAHLE CleanTE 41534 is a Security
Level P7 machine capable of reducing a single
sheet of paper into over 15,500 tiny particles.
is machine is designed for military, federal,
state or local governments as well as Depart-
ment of Defense contractors engaged in proj-
ects where National Security is an issue.
e DAHLE CleanTEC® is the World's only
shredder with a ne dust ltration system.
is integrated system collects ne dust par-
ticles created around the cutting cylinders,
and forces them into a specialized lter on
the back of each machine. is DAHLE
CleanTEC® lter permanently traps up to
98% of the ne dust, and provides a cleaner,
healthier work environment.
Safety continues to be the priority at Dahle,
and the DAHLE CleanTEC® 41534 shredder
features the most advanced safety features in
the industry. Equipped with the revolution-
ary Safe Technology Package, each shredder
oers Verbal and Contact Emergency Shut-
down. In the event of an emergency, simply
say "Stop" or tap the top cover of the machine,
and the shredder immediately stops. e 12"
feed opening is reinforced with steel and only
large enough to accept paper. As an added
safeguard, this opening contains electronic
sensors that will turn the shredder o, should
your ngers get too close. An emergency shut-
o switch is also located on the back of the
machine as yet another level of personal safety.
e DAHLE CleanTEC® 41534 operates using
the intuitive SmartPower Energy Management
System. is multi-stage system reduces pow-
er consumption aer ten minutes of sitting idle
(sleep mode), and completely powers down af-
ter 30 minutes of inactivity. Dahle SmartPow-
er will appeal to those interested in conserving
energy as well as reducing electrical costs.
Just like any ne tuned machine, your shred-
der needs to be properly oiled to run at peak
performance. is shredder is equipped with
the Dahle EvenFlow Lubricator. is auto-
matic oiler provides slow, continuous lubrica-
tion across the entire cutting mechanism and
ensures peak performance.
CleanTEC®
Filtration
Safe
Technology
ESP
Protection
SmartPower
Management
EvenFlow
Lubricator
A
T
German
Engineered
e DAHLE CleanTEC® lter traps
up to 98% of the ne dust and pro-
vides a healthier work environment.
e easy-to-use command dial controls
all of the shredder's functions and illu-
minates the proximity to sheet capacity.
e EvenFlow Lubricator automatic
oiler provides slow, continuous lubri-
cation and ensures peak performance.
41534 12" 8 / 10 1 x 4.7 38 23 52 P-7 mm mm gal f/m dB 34 ½" x 29" x 20" 132 lbs
®


Produkt Specifikationer

Mærke: Dahle
Kategori: Papirmakulator
Model: CleanTEC 41534

Har du brug for hjælp?

Hvis du har brug for hjælp til Dahle CleanTEC 41534 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Papirmakulator Dahle Manualer

Papirmakulator Manualer

Nyeste Papirmakulator Manualer

Digitus

Digitus DA-81606 Manual

13 December 2024
Bonsaii

Bonsaii C261-D Manual

5 December 2024
Fellowes

Fellowes DS-12CS Manual

16 September 2024
Digitus

Digitus DA-81608 Manual

11 September 2024
GBC

GBC Momentum X26-32 Manual

5 September 2024
GBC

GBC AutoFeed+ 300M Manual

5 September 2024
GBC

GBC AutoFeed+ 150X Manual

5 September 2024
GBC

GBC Momentum X18-12 Manual

5 September 2024