DeWalt DWF83PL Manual
DeWalt
Hæftemaskine
DWF83PL
Læs nedenfor 📖 manual på dansk for DeWalt DWF83PL (104 sider) i kategorien Hæftemaskine. Denne guide var nyttig for 17 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere
Side 1/104
INSTRUCTION MANUAL
GUIDE D’UTILISATION
MANUAL DE INSTRUCCIONES
INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA DE
GARANTÍA. ADVERTENCIA: LÉASE ESTE INSTRUCTIVO ANTES DE
USAR EL PRODUCTO.
If you have questions or comments, contact us.
Pour toute question ou tout commentaire, nous contacter.
Si tiene dudas o comentarios, contáctenos.
1-800-4-D
e
WALT • www.dewalt.com
DWF83PT
30° Paper Tape Framing Nailer/ Clouese à Charpente de 30° pour ruban de papier/Clavadora Estructural de 30° Para Cinta De Papel
DWF83PL
21° Plastic Collated Framing Nailer/ Clouese à charpentede 21° en plastique/Clavadora Para Moarcos de 21° Con Unión de Plástico
DWF83WW
28° Wireweld Collated Framing Nailer/ Cloueuse à charpente pour clous soudés 28°/Clavadora de estructuras para clavos unidos
con alambre de 28°
(final size: 8.5" x 5.5")
• Be aware that when the tool is being
utilized at pressures on the high end
of its operating range, nails can be
driven completely through thin or
very soft work material. Make sure
the pressure in the compressor is set so
that nails are set into the material and not
pushed completely through. (Fig. P)
• Keep hands and body parts clear of
immediate work area. Hold workpiece
with clamps when necessary to keep
hands and body out of potential harm. Be
sure the workpiece is properly secured
before pressing the nailer against the
material. The contact trip may cause
the work material to shift unexpectedly.
(Fig.Q)
• Do not use tool in the presence of
flammable dust, gases or fumes. The
tool may produce a spark that could
ignite gases causing a fire. Driving a nail
into another nail may also cause a spark.
(Fig.R)
• Keep face and body parts away from
back of the tool cap when working
in restricted areas. Sudden recoil can
result in impact to the body, especially
when nailing into hard or dense material.
(Fig. S)
• Grip tool firmly to maintain control while allowing tool to
recoil away from work surface as fastener is driven. In
“Contact Actuation Mode” if contact trip is allowed to recontact
work surface before trigger is released an unwanted fastener will
be fired.
• Choice of triggering method is important. Check the manual
for triggering options. Always select the trigger method that is
appropriate to the fastener application and the training of the
operator.
CONTACT ACTION TRIGGER
• When using the contact action
trigger, be careful of unin tentional
double fires resulting from tool
recoil. Unwanted fasteners may be
driven if the contact trip is allowed to
accidentally re-contact the work surface.
(Fig. T)
TO AVOID DOUBLE FIRES:
• Do not engage the tool against the work surface with a
strong force.
• Allow the tool to recoil fully after each actuation.
• Use sequential action trigger.
• When “contact” actuating the framing nailer, always
keep tool under control. Inaccurate placement of tool can
result in misdirected discharge of a fastener.
SEQUENTIAL ACTION TRIGGER
• When using the sequential action
FIG. U
trigger, do not actuate the tool
unless the tool is placed firmly
against the workpiece.
• Do not drive nails blindly into walls,
floors or other work areas. Fasteners
FIG. T
FIG. Q
Fig. R
FIG. S
English
4
Produkt Specifikationer
| Mærke: | DeWalt |
| Kategori: | Hæftemaskine |
| Model: | DWF83PL |
Har du brug for hjælp?
Hvis du har brug for hjælp til DeWalt DWF83PL stil et spørgsmål nedenfor, og andre brugere vil svare dig
Hæftemaskine DeWalt Manualer
1 Oktober 2024
4 September 2024
4 September 2024
4 September 2024
4 September 2024
4 September 2024
1 September 2024
30 August 2024
5 August 2024
4 August 2024
Hæftemaskine Manualer
- Hæftemaskine Bosch
- Hæftemaskine Sencor
- Hæftemaskine Metabo
- Hæftemaskine RYOBI
- Hæftemaskine Silverline
- Hæftemaskine Whirlpool
- Hæftemaskine Makita
- Hæftemaskine Güde
- Hæftemaskine Trisa
- Hæftemaskine Biltema
- Hæftemaskine Milwaukee
- Hæftemaskine Aqua Joe
- Hæftemaskine Parkside
- Hæftemaskine Black And Decker
- Hæftemaskine Einhell
- Hæftemaskine Hikoki
- Hæftemaskine Hitachi
- Hæftemaskine Steinel
- Hæftemaskine Targus
- Hæftemaskine Rapid
- Hæftemaskine Topcraft
- Hæftemaskine Powerfix
- Hæftemaskine Rapoo
- Hæftemaskine Fellowes
- Hæftemaskine Rexel
- Hæftemaskine Craftsman
- Hæftemaskine Powerplus
- Hæftemaskine Genesis
- Hæftemaskine Meister
- Hæftemaskine Fieldmann
- Hæftemaskine Porter-Cable
- Hæftemaskine Sun Joe
- Hæftemaskine Proline
- Hæftemaskine Klein Tools
- Hæftemaskine President
- Hæftemaskine Holzmann
- Hæftemaskine CTA Digital
- Hæftemaskine Kensington
- Hæftemaskine Iluv
- Hæftemaskine Meister Craft
- Hæftemaskine Swingline
- Hæftemaskine Surtek
- Hæftemaskine Dedra
- Hæftemaskine POWERNAIL
- Hæftemaskine Werckmann
- Hæftemaskine Neo
- Hæftemaskine Syscom
- Hæftemaskine MSW
- Hæftemaskine Mannesmann
- Hæftemaskine Smart365
- Hæftemaskine Total
Nyeste Hæftemaskine Manualer
1 Februar 2025
1 Februar 2025
16 December 2024
7 December 2024
7 December 2024
4 December 2024
4 December 2024
12 November 2024
12 November 2024
11 November 2024