Dormakaba CL700 Manual


Læs nedenfor 📖 manual på dansk for Dormakaba CL700 (2 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 26 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/2
CL700 CYLINDRICAL LEVERSET
Installation Instructions
76002003 07/15www.dorma.com
Tools required for installation
#2 Cross drive screwdriver
1. Install latch
1.1 Place the latch into the door edge.
Orient such that the beveled edge of the latch
faces the door jamb.
1.2 Secure with two 8-32 x ¾ combo screws.
NOTE: Latch sleeve to be used for doors with
1-1/8” face plate prep and 1” latch bore.
2. Install lock assembly
Adjust for door thickness
NOTE: Lock comes adjusted for 1
door from the factory.
2.1 To adjust the lock assembly for
door thickness, align so the center
of the chassis is in line with the
center of the latch.
3. Install inside rose mounting plate
3.1 Hold the lock
assembly in place.
3.2 Thread the inside
rose mounting
plate onto the
chassis until snug
against the door
and tighten using
the included
spanner wrench.
Be sure holes in
plate are aligned
with the holes in
the door.
3.3 Secure the
mounting plate
using two
10-32 x 1-½
screws.
2.2 Slightly separate the thru-bolt
retainer from the outside rose.
2.3 Rotate the outside rose assembly
to adjust for proper door thickness.
2.4 Realign the thru-bolt retainer with
the outside rose.
Install chassis
2.5 Slide the lock assembly into the face of the
door.
Be sure to engage the inner latch mechanism
of the chassis with the back of the latch as
1
432
Center of
latch
Chassis
Latch
Overall Exploded View
s
h
own
.
4. Install rose
4.1 Push the inside rose
onto the inside rose
mounting plate
oriented such that the
rose notch is
facing downward.
NOTE: Be sure the lever
insert is inserted into
the inside lever prior to
installation.
4.2 Push the inside lever
onto the spindle until
it clicks into place.
Part List
1 - IC core
2 - Outside IC lever
3 - Conventional cylinder
4 - Inside conventional
cylinder lever
5 - Lock assembly
6 - Inside rose mounting plate
7 - 10-32 x 1-½ screws (x2)
8 - Inside rose
9 - Lever insert
10 - Inside lever
11 - 8-32 x ¾ ” combo screws (2)
12 - Latch
13 - Latch sleeve
14 - Outside rose assembly
Beveled
edge
Spanner
wrench
Inside rose
mounting
plate
facin
g d
own
war
d.
Chassis
Outside rose
assembly
Thru-bolt
retainer
Inside
lever
Inside
rose
Spindle
Inside
rose
mounting
plate
Rose
notch
location
5. Install strike
5.1 Insert strike as shown, and secure with two
12-24 x 1” combo screws.
Strike part list
1 - Strike plate
2 - 12-24 x 1” combo-screws
5
2
1
2
1
9
8
7
6
5
4
3
12
11
10
13
14


Produkt Specifikationer

Mærke: Dormakaba
Kategori: Ikke kategoriseret
Model: CL700

Har du brug for hjælp?

Hvis du har brug for hjælp til Dormakaba CL700 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Dormakaba Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer