Dormakaba Low Profile Vertical Actuation Bar Manual

Dormakaba Ikke kategoriseret Low Profile Vertical Actuation Bar

Læs nedenfor 📖 manual på dansk for Dormakaba Low Profile Vertical Actuation Bar (2 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 27 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/2
Subject to change without notice
Description
This vertical actuation bar exceeds all
local ADA building codes that require
high and low actuators, eliminating
the need to install two separate
devices.
The actuator utilizes four highly
sensitive membrane switches, which
require very little force and ensure
actuation across the entire surface.
This all-in-one solution to high/low
mounting requirements can be
conveniently installed in a variety of
locations with hard-wired
communication, or connected to a
variety of dormakaba wireless
transmitters.
Features & benefits
Full-length plate for maximum
accessibility.
Low profile (1" deep) design helps
prevent accidental damage in
high traffic areas.
Exceeds California Building Code
2013, Page 559, 11B-404.2.9,
Exception 2c.
Installs easily on either walls or
bollards for maximum mounting
flexibility.
Available with convenient, built-in
wireless transmitter (300, 433, or
900 MHz frequencies) for wireless
activation applications.
Activation area of 36" × 6"
(216 square inches).
Low profile vertical
actuation bar
Automatic sliding, swinging, and
revolving doors
Entrance systems


Produkt Specifikationer

Mærke: Dormakaba
Kategori: Ikke kategoriseret
Model: Low Profile Vertical Actuation Bar

Har du brug for hjælp?

Hvis du har brug for hjælp til Dormakaba Low Profile Vertical Actuation Bar stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Dormakaba Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer