Edimax ET-912+ Series Manual

Edimax Ikke kategoriseret ET-912+ Series

Læs nedenfor 📖 manual på dansk for Edimax ET-912+ Series (3 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 29 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/3
ET-912+ Series
100Base 10/100BaseTX To 100Base-FX
Media Converter
Best media conversion solutions for network connectivity
Edimax’s full series of Media Converter are designed to meet the needs for massive optical fiber network,
provide the whole Ethernet / Fast Ethernet network implementation.
Migrating between copper and ber-based Medium
ET-912+ series convert the signals between two dierent transmission medium, allowing user a simple and
cost-eective method to migrate between UTP cable and ber optic cable. It can transmit signals up to 2km
(multimode) and 30/40/60/80/100km (single-mode) in ber medium, allowing users to extend network.
Comply with IEEE Standards
ET-912+ series are fully compliant with IEEE 802.3 10Base-T and 802.3u 100Base-TX, 100Base-FX standards.
The device comes with one RJ-45 port to connect to a 10/100Base-TX device such as workstation or switch
and one ber connection to connect a 100Base-FX device.
Built in Switching ASIC
ET-912+ series have turned the function more like a 2 ports switch than a traditional converter. User can get all
switching benets such as frames checking and ltering.
Feature LED and Fiber link alarm
User could monitor the device through Feature LED. In addition, Fiber Link Alarm could allow user to monitor
and maintain their critical ber link more eectively.
Unique voltage supervisor
Built in voltage supervisor IC will automatically reset all chipsets in converter as power voltage drop below 2.9V,
this action can make sure ber port and TP port work normally when thunder storm or power unstable occuring
cause the power
electricity suddenly down in an instant time.
Plug-and-Play Installation
Simply to plug the TP and ber port to the device having the media convertibility.
Features
Compliant with IEEE 802.3 10BaseT and IEEE 802.3u 100BaseTX/100BaseFX Standards
One 10/100BaseTX Ethernet TP Port and One 100BaseFX Ethernet Fiber Port
One 100BaseFX Fiber Port can support either Multi (SC/ST) or Single (SC, LC, MT-RJ) Mode
TP Port can support Half/Full-Duplex, Auto-MDI/MDI-X and Auto-Negotiation
Providing a slide switch for Full- and Half-Duplex selection on FX Port
Multiple Fiber Connectors
•Providing 19” Converter Chassis for up to 16 slots with redundant power supply for optional expansion use


Produkt Specifikationer

Mærke: Edimax
Kategori: Ikke kategoriseret
Model: ET-912+ Series

Har du brug for hjælp?

Hvis du har brug for hjælp til Edimax ET-912+ Series stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Edimax Manualer

Edimax

Edimax ES-5800G V2 Manual

13 Januar 2025
Edimax

Edimax DP-240W52V Manual

10 Januar 2025
Edimax

Edimax EU-PC2C Manual

22 September 2024
Edimax

Edimax AR-7064+ Manual

10 September 2024
Edimax

Edimax EW-7303HPn Manual

3 September 2024
Edimax

Edimax GS-1105PE Manual

2 September 2024
Edimax

Edimax FS-5428X Manual

2 September 2024
Edimax

Edimax GS-5654PLX V2 Manual

2 September 2024
Edimax

Edimax IEW-7811UTC Manual

31 August 2024
Edimax

Edimax SP-1123WT Manual

30 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Ditek

Ditek D50-CM Manual

30 Januar 2025
Ditek

Ditek DTK-2MB Manual

30 Januar 2025
Ditek

Ditek DTK-MB10 Manual

30 Januar 2025
Xvive

Xvive AT-1 Manual

30 Januar 2025
Ecler

Ecler CLOUD Manual

30 Januar 2025
Ecler

Ecler RePLAYER Manual

30 Januar 2025
Zenec

Zenec Z-E3771 Manual

30 Januar 2025