Edimax ET-913SFP V2 Manual

Edimax Ikke kategoriseret ET-913SFP V2

Læs nedenfor 📖 manual på dansk for Edimax ET-913SFP V2 (3 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 20 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/3
ET-913+ V2 Series
10/100/1000Base-T to 1000Base-SX/LX
Media Converter
Best media conversion solutions for network connectivity
Edimax’s full series of Media Converter are designed to meet the needs for massive optical fiber network,
provide the whole Gigabit Ethernet network implementation.
Migrating between copper and ber-based Medium
ET-913+ series convert the signals between two dierent transmission medium, allowing user a simple and
cost-eective method to migrate between UTP cable and ber optic cable. It can transmit signals up to 550m
(multimode) and 10/20/30/60km (single-mode) in ber medium, allowing users to extend network.
Comply with IEEE Standards
ET-913+ series are fully compliant with IEEE 802.3/u/ab 10/100/1000Base-T and 802.3z 1000Base-SX/LX
standards. The device comes with one RJ-45 port to connect to a 10/100/1000Base-T device such as
workstation or switch and one ber connection to connect a 1000Base-SX/LX device.
Feature LED and Fiber link alarm
User could monitor the device through Feature LED. In addition, Fiber Link Alarm could allow user to monitor
and maintain their critical ber link more eectively.
Unique voltage supervisor
Built in voltage supervisor IC will automatically reset all chipsets in converter as power voltage drop below 2.9V,
this action can make sure ber port and TP port work normally when thunder storm or power unstable occurring
cause the power electricity suddenly down in an instant time.
Plug-and-Play Installation
Simply to plug the TP and ber port to the device having the media convertibility.
Features
Compliant with IEEE 802.3 10BaseT, IEEE802.3u 100BaseTX , IEEE 802.3ab 1000BaseT and IEEE 802.3z
1000BaseSX/LX Standards
One 10/100/1000BaseT Gigabit Ethernet TP Port and One 1000BaseSX/LX Gigabit Ethernet Fiber Port
One 1000BaseSX/LX Fiber Port can support either Multi or Single Mode
TP Port can support Half/Full-Duplex, Auto-MDI/MDI-X and Auto-Negotiation
Multiple Fiber Connectors
Supports jumbo frame 9.6KB
•Providing 19” Converter Chassis for up to 16 slots with redundant power supply for optional expansion use
Supports DIP switch and LFP function
DIP
DIP
DIP
DIPDIP
ON
ON
ON
ONON
OF
OF
OF
OFOFF
F
F
FF
1
Converter & Switch Mode
Switch Mode
2
LFP Enable
LFP Disable


Produkt Specifikationer

Mærke: Edimax
Kategori: Ikke kategoriseret
Model: ET-913SFP V2

Har du brug for hjælp?

Hvis du har brug for hjælp til Edimax ET-913SFP V2 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Edimax Manualer

Edimax

Edimax EU-PC2C Manual

22 September 2024
Edimax

Edimax AR-7064+ Manual

10 September 2024
Edimax

Edimax EW-7303HPn Manual

3 September 2024
Edimax

Edimax GS-1105PE Manual

2 September 2024
Edimax

Edimax FS-5428X Manual

2 September 2024
Edimax

Edimax GS-5654PLX V2 Manual

2 September 2024
Edimax

Edimax IEW-7811UTC Manual

31 August 2024
Edimax

Edimax SP-1123WT Manual

30 August 2024
Edimax

Edimax GS-1024 Manual

22 August 2024
Edimax

Edimax EU-4306C Manual

22 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Atlona

Atlona AT-DVIF30S-IR Manual

29 December 2024
Atlona

Atlona AT-PRO3HD66M Manual

29 December 2024
Atlona

Atlona AT-3GSDI500 Manual

29 December 2024
BlueBuilt

BlueBuilt BBMAG2M Manual

29 December 2024
Atlona

Atlona AT-3GSDI-14 Manual

28 December 2024
Atlona

Atlona AT-COMP10SS Manual

28 December 2024
Atlona

Atlona AT-2VGA300SL Manual

28 December 2024
Atlona

Atlona AT-HD-V216 Manual

28 December 2024
Atlona

Atlona AT-VGA11S Manual

28 December 2024
True

True TC900 Manual

28 December 2024