Electro Harmonix S8 Manual


Læs nedenfor 📖 manual på dansk for Electro Harmonix S8 (1 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 5 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/1
S8 Mul-Output Power Supply
PRECAUTIONS
PLEASE READ CAREFULLY BEFORE PROCEEDING
Power Supply
Connect the AC power adapter to an AC outlet of the correct voltage. Please be sure to use only
an AC adapter which supplies 12VDC (+/- 10%) center negave. The maximum working voltage is
15V. Any voltage higher than 15V will create a dangerous situaon. Always unplug the AC power
adapter when not in use.
Connecons
Always turn o the power of this and all other equipment before connecng or disconnecng.
This will help prevent malfuncon and/or damage to your devices.
Handling
Do not apply excessive force to the inputs and outputs. Do not drop the unit and do not subject it
to shocks or excessive pressure.
Cleaning
Clean only with a so, dry cloth. If necessary, slightly moisten the cloth. Do not use abrasive
cleanser, cleaning alcohol, paint thinners, wax, solvents, cleaning uids or chemical-impregnated
wiping cloths.
Interference with Other Electrical Devices
Radios and televisions placed nearby may experience recepon interference. Operate this unit at
a suitable distance from radios and televisions.
Locaon
To avoid deformaon, discoloraon, or other serious damage, do not expose this unit to the
following condions: direct sunlight, magnec elds, excessive dust or dirt, strong vibraons or
shocks, heat sources, extreme temperatures, or high moisture.
FEATURES
Provides stable 9V DC and 18V DC high-performance power. Each 9V output provides a
maximum current of 250mA, meeng the power requirements of most pedals.
Powers up to eight eect pedals with individually regulated outputs
Short circuit protecon design for individual outputs
OVERVIEW
1. 12V DC INPUT POWER LIGHT: When connected to the power supply, the LED lights.
2. OUTPUT POWER LIGHTS: When connected to the power cords, the corresponding LED lights.
3. INPUT POWER JACK: Connect the output plug from the supplied AC power supply here.
4. OUTPUT POWER JACKS: Connect the supplied DC power cables for your pedals to these jacks.
WELCOME
Congratulaons on your purchase of the S8 Mul-Output Power Supply, a convenient soluon to
unwanted cable mess and noise. The S8 will supply power to up to eight eects pedals and is
housed in a compact, rugged metal chassis.


Produkt Specifikationer

Mærke: Electro Harmonix
Kategori: Ikke kategoriseret
Model: S8

Har du brug for hjælp?

Hvis du har brug for hjælp til Electro Harmonix S8 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Electro Harmonix Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Wagner

Wagner 2K Smart Manual

4 November 2024
Moen

Moen EB500-E Manual

3 November 2024
Moen

Moen Aspen 5824CH Manual

3 November 2024
Luxman

Luxman MQ-88uSE Manual

3 November 2024
Luxman

Luxman CL-38uSE Manual

3 November 2024
Luxman

Luxman CL-1000 Manual

3 November 2024
Moen

Moen Aspen 5802CH Manual

3 November 2024
Luxman

Luxman SQ-38u Manual

3 November 2024
Moen

Moen Aspen 5818CH Manual

3 November 2024