Electrolux EWE361LB-DIX4 Manual
Electrolux
Ketel & boiler
EWE361LB-DIX4
Læs nedenfor 📖 manual på dansk for Electrolux EWE361LB-DIX4 (3 sider) i kategorien Ketel & boiler. Denne guide var nyttig for 7 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere
Side 1/3
![](https://manualstech.ams3.cdn.digitaloceanspaces.com/html/nl/electrolux/ewe361lb-dix4/html/bg1.png)
EN ELECTRIC WATER HEATER USER MANUAL
EWE361LA-DAX4
EWE361LX-DBX4
EWE361LB-DIX4
2. SAFETY INFORMATION
2.1 Pr c a rodu ts m nufactu ed by Electrolux are safe
provided they are inst ed, used nd int inall a ma a ed
in go d working in aco order corda once with ur
instruct ons and eci r ommendati ns ways efer o . Al r
t ma ve y o . o this nual if you ha an d ubt
2.2 T . he Electric Water Heater must be earthed
Imp per ro groundin uld use tr al shockg co ca elec ic .
2.3 y oll i o c If an of the f ow ng conditi ns oc ur as
shown below, im i sw of e med ately itch f th power
supply c c and onta t the Electrolux Consumer
2.6 When the Electric Water Heater is
used by one susome ch as child, elderly
person, c a si k person nd physically
handicapped eperson, th person
con kindly equestcerned is r ed to y pa
attention nd sh r a check the owe
te r amperatu e by h nd f to tirom time me.
2. Durin ightning7 g l /thunder, c ff swit h o the power
supp thly to e Electric Water Heater in advance t o prot cte
the Electric Water Heater against possible damage.
2.8 The ity c c le al earth continu ondu tor of the e ctric
insta latil o effe l on must be ctive y c nnected to all
e ed metal xpos parts of other ppl a iances and
services oom, whi h rin the c in the Electric Water
Heater instal onf o e is t b l ced to orm to local
re and r pr ggulations ensu e oper earthin /g ounding r
for ELCB to be effective.
NOTE: rem When ovin theg Electric Water Heater
fro e, a a a t ma e m ckpa ag sm ll moun of water y b
found inside. This is normal as the Electric Water
Heater is itested dur ng anufa turinm c g pro . cess
WARNING !
.
.
.
.
.
If the begins to make an Electric Water Heater
odd noise, smell or smoke.
If ELCB trips and Indicator Electric Water Heater
does not light up.
Water temperature cannot be controlled.
If the shows signs of a Electric Water Heater
distinct change in performance.
If water leaks from inside.
2.10 Insta tilla o m ca i on ust be rr ed ut by a
qualified pers nne mp ianc calo l and in co l e lo
2.11 Thi s Electric Water Heater must be
perm nent y connecte tha l d to e r di ect ain m line
supply. l cket t r o e ed A p ug and so is no ec mm nd
t ed.o be us
2.12 For rthe cor ect size of wire conductor
c re o ing o f ror sp nd t di fe ent ctri oadings,ele cal l
2.13 Thi erates a s Electric Water Heater op at
mi m w ow eni um ater flrat of 2.0 tre/li min and
maxi or ing mum w k pre r of . For ssu e 6 bars
direct conn cti the on from e te wa r tank, the
2.14
The l on Electric Water Heater wil not functi
r is iif the e nsufficient ter wa ow ( n 2. l re/mflmi 0 it in)
2.15
The bui lt-in ELCB will automatically cut off
the upp n power s ly i case re s a r the i cur ent
2.16
The th rm stat ti y ut e o wi omall aut call c off the
power i it se e o i supply f has ns d an abn rmal r se in
w e re.at r temperatu
CAUTION !
author ty i regul ti nsa o .
p se r elea ef r to Table 1.
Electric Water Heater m t ve us ha an
inst on ni um al tila mi m 1.0m ow e w .bel th ater tank
to tri r the gge flow switch.
lea geka over 15mA.
Care Center. Never attempt to repair the Electric
Water Heater yourself:
2.5 For Pump Model, it is highly recommended
to connect the Water Inlet Connection to tank
storage supply, otherwise it may cause damage
to the Pump Motor.
User i o e s advised t test and adjust th
w er m rat te peratu e bef ngor ie us .
2.9 WARNING : Metallic / chromed hose and
conductive control valve shall not be used.
REV 1
3.
ELECTRIC WATER HEATER UNIT INSTALLATION
3.1 Select a suitable position in the bathroom.
3.2 Remove the screw (A) at the bottom of the
Electric Water Heater
. (Fig. 2)
3.3 Remove the Front Cover from the bottom and then lift up the front cover.
3.4 Mark 3 Screw points of the Heater Base on the wall. The
Electric Water Heater
position should be
1.5m above the bathroom floor. (Fig. 2)
3.5 Mark 2 screw points of the Slider Rail beside the
Electric Water Heater
. It is recommended that the
top of the portion is in level with the top of
Electric Water Heater
. (Fig. 3)
3.6 Use 6mm diameter drill and make the wall plug holes in depth of 34mm ,for mount the Electric
Water Heater.
3.7 Insert the wall plugs and mount the
Electric Water Heater
firmly in position with the screws provided.
3.8 Insert the Shower Holder and Soap Tray into the Slider Rail.
3.9 Insert the Rail Bracket to both end of the Slider Rail Bar.
3.10 Remove the cap from the Rail Bracket and screw the Bracket to marked position.
Replace the cap. (Fig. 3)
Fig. 3
connect the
hand shower
to flexible hose
SHOWER SET INSTALLATION DIAGRAM
Flexible Angle
Adjustment
5 Spray
Patterns
Selection
Hand
Shower
Flexible
Hose
Soap Tray
Slider Rail Bar
Adjustable
Shower
Holder
Screw
Wall Plug
Mounting
Terminal
connect to
water outlet
connection
Rail bracket cap
Hexagon tool
(Tighten plastic nut before close cap)
Plastic nut
Fig 3A
RAIL BRACKET COVER & CAP DISMANTLE STEPS
1RAIL BRACKET 2OPEN THE RAIL
BRACKET COVER
BY TURNING ANTI
CLOCKWISE &
USING SCREW
DRIVER TO OPEN
THE CAP
3RAIL BRACKET
COVER COME-OUT
4. PLUMBING PROCEDURE
CAUTION!
IMPORTANT
This Electric Water Heater is a single point
system and the “Water Outlet” can only be
fitted to the Hose and Handshower set
provided. MUST NOT TO CONNECT
CONTROL VALVE OR FITTING CAN BE
FITTED TO THE WATER OUTLET.
WARNING!
5.
ELECTRICAL INSTALLATION
WARNING!
PROCEDURE :
5.7 Connect the cable as following: (Fig. 5)
BROWN or RED --LIVE (L)
BLUE or BLACK --NEUTRAL (N)
GREEN or GREEN/YELLOW --EARTH ( )
5.8 Clamp the cable to the correct position.
Technician need to confirm the wire before
installation.
CHECK IF THE WIRING CONNECTION IS
CORRECT and replace the cover.
5.9 When putting back the Front Cover,
please take note of the procedure shown below :
-Ensure the position is correct, turn the
Temperature Control Knob Insert to OFF
position as shown in Fig.A (At the Heater Base)
5.1 This Electric Water Heater must be
earthed. Improper grounding could cause
electrical shock.
5.2 Remember to SWITCH OFF the power
supply before carrying out any electrical work.
5.3 Refer to TABLE 1 for the correct cable size.
5.4 Use double insulation cable of over 4.0mm²
5.5 Lead the power cable from MCB to a
“ON/OFF’’ double pole Linked Switch having a
contact separation of at least 3mm in all poles
outside the bathroom, then lead a cable to the
terminal block inside the Electric Water Heater.
(Fig. 4)
5.6 Insert the wall embedded cable through
Side Entry ‘A’ by cutting a hole at the source
cord rubber holder and lead the cable to
Cable Bracket ‘B’. (Fig. 6)
Always KEEP the water supply to the Electric Water
Heater free from mud and dirt at all time during usage.
4.1 Connect the 3 in 1 Stop Valve to the Water
Inlet with washer. Use correct tools to tighten
and be careful not to over tighten and damage
the plastic nut.
4.2 Connect the incoming water piping to the 3 in
1 Stop Valve (1/2” BSP).
Make sure to put the Mesh Filter between 3
in 1 Stop Valve and incoming water piping.
4.3
If in any case, the 3 in 1 Stop Valve is not use or
omitted, make sure to put the Mesh Filter
between the Electric Water Heater inlet pipe
and incoming water pipe.
4.4 Turn on the water mains to drain out all plumbing
dirts before connecting the water supply to the
Electric Water Heater, the water supply to the
Electric Water Heater must be free from mud and
dirt.
4.6 Hook the Handshower to the Slider Rail
Shower Holder and adjust to your ideal position.
4.7 Check if any water leakage.
4.8 Do not use sealing tape during piping
installation.
THE HEATER TANK MUST BE FILLED UP WITH
WATER BEFORE TURNING ON THE POWER
SUPPLY TO PREVENT ANY DRY BURNT DAMAGE
TO THE HEATING ELEMENT.
4.5 Connect the Hose and Handshower to the
outlet of Electric Water Heater, be sure to put in the
Washer in between the connection. (Fig. 2)
4.10 DO NOT APPLY PLUMBING CEMENT ON
CONNECTION. WHENEVER NECESSARY, USE
ONLY THREAD OR SEALING TAPE.
4.9 THE WATER INLET AND OUTLET MUST BE
INSTALLED CORRECTLY, OTHERWISE ELECTRIC
WATER HEATER WILL NOT FUNCTION.
5. ELECTRICAL INSTALLATION (CONT’D)
6. TABLE 1 - CABLE SIZE TABLE
Power Current
(kW) (A)
Conductor Size (csa)
mm Conduit Cable Flexible Cable
On/ Off Fuse /
Switch (A) MCB (A)
2
Voltage
(AC)
3.6 15.0 4.0 7 / 0.85mm 56 / 0.30 mm 20 20
240V ~
50/60 Hz
(Malaysia Model)
METHOD OF ALIGNMENT WHEN REPLACING FRONT COVER
Cable
Fig. 4
Brown or Red = Live (L)
Blue or Black = Neutral (N)
Green or Green/ Yellow = Earth ( )
Fig. 5
Fuse Distributor Board
Miniature Circuit Breaker (MCB)
ON/OFF Double Pole Switch
Double PVC cable
NOTE:
Refer to TABLE 1 for electrical loading and
correct size of wire conductor
Front Cover
Fig A Fig B
F
A
B
Fig. 6
Position
this Way
FF
Position
this Way
1 2
3 4 5
9
10
12
13
11
14
1. PARTS IDENTIFICATION
1. Front Cover
2. LED Indicators
i) Earth LED Indicator
ii) Power/ELCB Indicator
3.
Test / Reset Button
4.
Rating Label
5. Pump Button*
6. Temperature Control Knob
7. 3 in 1 Stop Valve
i) Stop Valve Lever
ii) Flow Regulator Valve Adjustment
iii) Built-in-Filter
8. Mesh Filter
9. Rail Support
10.
Handshower
11. Adjustable Shower Holder
12. Slider Rail
13. PVC Hose
14. Soap Tray
15. Heater Base
16. Terminal Block
17. Thermostat (Double-Action)
18. Heater Tank
19. PCB Board (Test & Reset)
20. VR Board
21. Main/ ELCB Board**
22. Water Outlet Connection
23. AC Pump*
24. TRIAC
25. Reed Switch Assy
26. Water Inlet Connection
27. SMPS PCB Board
28. D.C. Silent Pump*
29. Pump Board
30. Temperature Knob LED Light
15
16
18
19
22
21
23
24
25
26
OFF
7
8
27
24
25
26
OFF
7
8
28
No Pump model
24
25
26
OFF
7
8
AC Pump model DC Pump model
Fig. 1
15
16
18
19
22
20
21
17 17
15
16
18
19
22
21
17
OFF
7
8
1
3
6
4
29 29
5*
*
*
2
connect to
water outlet
connection
ELECTRIC WATER HEATER
UNIT INSTALLATION DIAGRAM
Fig. 2
Screw
A
3 in 1
stop valve
inlet
Wall
285.5mm
Washer
connect to
water inlet
connection
Min.
80 mm
150mm
O F
* For Pump Model only
** Pump Model VR Board & Main/ELCB Board combine.
2.4 If the Red (POWER) Indicator does not go off
when you turn off the water, switch OFF the
mains supply and contact Electrolux Consumer
Care Centre for repair service.Special skill is
required for repairing.
NEVER try to repair the unit by yourself.
* ** * **
** **
30
-
Install the Front Cover,turn the Temperature
Control Knob to OFF position to align with the
VR shaft as shown in Fig.B (At the Front Cover)
5.10 Fix the Temperature Control Knob and
screw ‘A’ (Fig. 2).
Reconnect the Temperature Knob LED Light
wire to Main Board (J5 Connector).
Produkt Specifikationer
Mærke: | Electrolux |
Kategori: | Ketel & boiler |
Model: | EWE361LB-DIX4 |
Har du brug for hjælp?
Hvis du har brug for hjælp til Electrolux EWE361LB-DIX4 stil et spørgsmål nedenfor, og andre brugere vil svare dig
Ketel & boiler Electrolux Manualer
![Electrolux](/images/logos/electrolux.png)
4 Juli 2024
![Electrolux](/images/logos/electrolux.png)
4 Juli 2024
![Electrolux](/images/logos/electrolux.png)
4 Juli 2024
![Electrolux](/images/logos/electrolux.png)
4 Juli 2024
![Electrolux](/images/logos/electrolux.png)
4 Juli 2024
![Electrolux](/images/logos/electrolux.png)
4 Juli 2024
![Electrolux](/images/logos/electrolux.png)
4 Juli 2024
![Electrolux](/images/logos/electrolux.png)
28 Juni 2024
![Electrolux](/images/logos/electrolux.png)
28 Juni 2024
![Electrolux](/images/logos/electrolux.png)
28 Juni 2024
Ketel & boiler Manualer
- Ketel & boiler Bosch
- Ketel & boiler Siemens
- Ketel & boiler GE
- Ketel & boiler Daikin
- Ketel & boiler Panasonic
- Ketel & boiler Gorenje
- Ketel & boiler VOX
- Ketel & boiler Philips
- Ketel & boiler Concept
- Ketel & boiler Teka
- Ketel & boiler AEG
- Ketel & boiler Hotpoint
- Ketel & boiler Atag
- Ketel & boiler Worcester
- Ketel & boiler Waeco
- Ketel & boiler Baxi
- Ketel & boiler De Dietrich
- Ketel & boiler Buderus
- Ketel & boiler BEKO
- Ketel & boiler Hitachi
- Ketel & boiler Ariston Thermo
- Ketel & boiler Haier
- Ketel & boiler EvoHeat
- Ketel & boiler Vaillant
- Ketel & boiler Tesy
- Ketel & boiler Junkers
- Ketel & boiler Daalderop
- Ketel & boiler Orbegozo
- Ketel & boiler Franke
- Ketel & boiler Cointra
- Ketel & boiler Cata
- Ketel & boiler Rommer
- Ketel & boiler Nibe
- Ketel & boiler Ferroli
- Ketel & boiler La Nordica
- Ketel & boiler Elco
- Ketel & boiler Inventum
- Ketel & boiler Khind
- Ketel & boiler Midea
- Ketel & boiler Intergas
- Ketel & boiler Eldom
- Ketel & boiler Viessmann
- Ketel & boiler Remeha
- Ketel & boiler Stiebel Eltron
- Ketel & boiler ACV
- Ketel & boiler IQE
- Ketel & boiler Rinnai
- Ketel & boiler Solac
- Ketel & boiler Technika
- Ketel & boiler Morco
- Ketel & boiler EccoTemp
- Ketel & boiler Corbero
- Ketel & boiler Kospel
- Ketel & boiler Kunft
- Ketel & boiler LERAN
- Ketel & boiler SIME
- Ketel & boiler Jocel
- Ketel & boiler HTW
- Ketel & boiler AquaTech
- Ketel & boiler Nefit
- Ketel & boiler A.O. Smith
- Ketel & boiler Masterwatt
- Ketel & boiler TTulpe
- Ketel & boiler Bulex
- Ketel & boiler AWB
- Ketel & boiler Quooker
- Ketel & boiler OSO
- Ketel & boiler Clage
- Ketel & boiler Joven
- Ketel & boiler Imarflex
- Ketel & boiler Thermor
- Ketel & boiler Keston
- Ketel & boiler LEMET
- Ketel & boiler Rheinstrom
- Ketel & boiler Wagaparts
- Ketel & boiler SolarEdge
- Ketel & boiler Wahlbach
- Ketel & boiler Intellihot
- Ketel & boiler Wijas
- Ketel & boiler Hydrotherm
- Ketel & boiler Amtrol
- Ketel & boiler Gleamous
- Ketel & boiler AquaMAX
- Ketel & boiler ENEFT
- Ketel & boiler MicroHeat
Nyeste Ketel & boiler Manualer
![Tesy](/images/pdf_free.png)
8 September 2024
![GE](/images/logos/ge.png)
7 September 2024
![Nibe](/images/pdf_free.png)
6 September 2024
![Nibe](/images/pdf_free.png)
6 September 2024
![MicroHeat](/images/pdf_free.png)
6 September 2024
![Khind](/images/pdf_free.png)
5 September 2024
![Remeha](/images/logos/remeha.png)
5 September 2024
![Khind](/images/pdf_free.png)
5 September 2024
![Khind](/images/pdf_free.png)
5 September 2024
![Imarflex](/images/pdf_free.png)
5 September 2024