Endorphin.es Total Recall Manual


Læs nedenfor 📖 manual på dansk for Endorphin.es Total Recall (1 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 29 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/1
ENDORPHIN.ES® – TOTAL RECALL
Module design by Andreas Zhukovsky
Collection Spring / Summer 2022
Endorphin.es are made in Barcelona, Spain
Follow, like, post and tag us at instagram:
@endorphin.es
WARRANTY
RTFM – be so kind and read the manual. It will provide you with the information you need to fully indulge the module you justpurchased – for which we like to thank you.
Enjoy your sound experiences, dear sonic traveller. Beginning from the product's purchase date a 1-year warranty is guaranteed for each product in case of any manufacturing errors
or other functional deficiencies during runtime.
The warranty does not apply in case of: • damage caused by misuse • mechanical damage arising from careless treatment (dropping, vigorous shaking, mishandling, etc.)
• damage caused by liquids or powders penetrating the device • heat damage caused by overexposure to sunlight or heating • electric damage caused by improper connecting
The warranty covers replacement or repair, as decided by us. Please contact us via email for a return authorization before sending anything. Shipping costs of sending a module back for
servicing is paid by the customer. Device complies with all EU regulations concerning RoHS lead-free manufacturing and WEEE disposal
Visit us:
https://endorphin.es
https://youtube.com/user/TheEndorphines
https://facebook.com/TheEndorphines
https://www.instagram.com/endorphin.es
https://twitter.com/endorphin_es
For technical requests: support@endorphin.es
For general requests: info@endorphin.es
FURTH BARCELONA, S.L.
VAT ID: ES B66836487
BABY, YOU MAKE ME WISH I HAD THREE HANDS!
6 HP width, 3x CV preset manager/multistage and macro controller for Eurorack
3 channel control voltage generator/attenuator/attenuverter
8 preset CV manager with two banks: bipolar -5...+5V and unipolar 0...+5V
Instant, slewed or continuous change between stored CV values
3-channel macro CV generator with smooth min./max. control
via CV, trigger or manually
CV acquisition: 16 bits SDADC, CV outputs: 12 bits
Depth: 30 mm (with plugged ribbon cable)
Power requirements: +12V: 55mA, -12V: 15mA
Video manual: https://youtu.be/NlUps_QvSGw
red/brown pair or wires correspond
to negative -12V power connector
connect with the
16-pin side into the
power buss board
POWER CONNECTION
bottom/rear side of the module
connect to the module
from the back side
-12V / red stripe
polarity marking
© Endorphin.es 2011–2022
Power OFF you modular system:
Hold SAMPLE while powering again:
You will see the preset I LED
slowly blink:
Connect the headphone output of your
computer to the META CV IN input of the
module with a simple mono or stereo cable.
Press PLAY and wait 1+ minutes. All 4 preset
LEDs will quickly blink and CV LEDs will be blue.
The modue will reboot automatically.
Don't play any other sounds on your
computer during update process.
When all LEDs flash RED,
the signal is too low or too high.
Just reset the firmware update process by
pressing SAMPLE once and
regulate the signal level with RATE knob
(full CCW: 1x amplification, full CW: 10x amplification)
Download latest firmware for
TOTAL RECALL here:
https://www.endorphin.es
3x control voltage outputs
FIRMWARE UPDATE:
LED indicators showing each
output voltage:
-5V = red
0V = dimmed
+5V = blue
Preset LEDs,
depending on the MODE they show either
selected preset (modes 1 and 2)
or selecting the channel to adjust
its min./max. levels (modes 3 and 4)
Bi-polar (switch to the left/-5...+5V output) and
Uni-polar (switch right/0...+5V output) voltage setting.
The voltages are stored separately in each setting.
CV inputs for channels 1-3.
If no patch cable is applied,
that channel has fixed CV per preset.
If cable with CV is inserted, then the knob
defines incoming signal attenuation
(uni-polar setting) or attenuvertion
(bi-polar setting)
Multimode SAMPLE button:
Depending on the mode it either toggles
the next preset (modes 1 and 2) or selects the
channel (1-3) to set min./max. voltage
(modes 3 and 4)
Multimode meta CV/trigger input:
Depending on the MODE it either works as
meta CV input (modes 1 and 3) to morph
between the voltage states or as meta
TRIGGER (a.k.a. STROBE) input (modes 2
and 4) to switch to the next state with
trigger input.
SMOOTH switch to the right enables
fixed 100ms slew when switching
between stored CV values (states)
instead of instantly jumping from one
value to another.
In macro mode this enables smooth
or instant morph between min./max.
states.
Manual CV knobs define the voltage value in the
selected state. Act as attenuator in uni-polar setting
or attenuverter in bi-polar setting, if external CV
is applied to the corresponding CV IN jack.
In macro modes 3 and 4, knobs 2 and 1 define
min. and max. states for the macro morphing —
knob 3 acting as macro, morphing from min. (CCW)
to max. (CW).
MODES EXPLAINED:
1. Preset manager with meta CV scan over the presets
LED 4 is constantly fully lit
indicating macro CV mode.
With short MODE press we select
CV channel 1-3 to define its min/max
values with the knobs 2 and 1 respectively.
Applying CV into META CV will morph
between min. and max. states
2. Preset manager with meta TRIGGER (strobe)
LEDs indication is similar as in
mode 1, but inverted. Applying
trigger into META will switch
to the next preset. Depending on
SMOOTH switch the change will be
either instant or slewed by 100ms
1 sec. press to enter mode 2
from mode 1 or 3 sec.+ press to enter
modes 3/4
3. Macro CV generator with meta CV min.-max. morph
One LED lights up at a time,
showing currently selected
preset (LED is fully on for presets I-IV,
semi lit for presets V-VIII).
Applying CV (0...5V) into META CV will
scan thru the presets. Depending
on SMOOTH switch the morphing will
either be instant or continuous.
4. Macro CV generator with meta TRIGGER (strobe)
LEDs indication is similar as in
mode 3, but LED 4 is now semi-lit.
Applying a single trigger to
META CV will jump from min. to max.
like flip-flop function.
Depending on SMOOTH switch
the change will either be instant
or slewed by 100ms.
1 sec. press to
enter mode 4
from mode 3 or back
3 sec.+ press to enter mode 3
from modes 1/2
short press engages
to the next preset
WAV
Video update guide: https://youtu.be/WKt7FdRGRYI


Produkt Specifikationer

Mærke: Endorphin.es
Kategori: Ikke kategoriseret
Model: Total Recall

Har du brug for hjælp?

Hvis du har brug for hjælp til Endorphin.es Total Recall stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Endorphin.es Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Elektron

Elektron Overbridge Manual

26 November 2024
Elektron

Elektron Sidstation Manual

26 November 2024
SoundTube

SoundTube IPD-RS82-EZ Manual

26 November 2024
Kramer

Kramer 4x1VB Manual

26 November 2024
Kramer

Kramer RC-63A Manual

26 November 2024
SoundTube

SoundTube IPD-HP82-EZ Manual

26 November 2024
Kramer

Kramer RK-KVM-1U-PP3 Manual

26 November 2024
Gioteck

Gioteck VX-2 (PS3) Manual

26 November 2024