Evolveo AudioConverter XS Manual

Evolveo Ikke kategoriseret AudioConverter XS

Læs nedenfor 📖 manual på dansk for Evolveo AudioConverter XS (1 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 22 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/1

- 8 -

Indicator Status

In receiving mode

Device 1 successfully paired

Device 2 successfully paired

Bypass mode

Flashes Blue and Red alternately to indicate is in pairing modedevice

In transmitting mode

- 15 -

8. Pair and Connect two Devices Simultaneously

In TX mode

Pair with the first device by following the previous instructions in the “Use as

a Transmitter (TX mode)” section.

2) Pair with the second device

• Set second headphones/speaker to pairing mode.

• button for 3s until the TX LED Set to pairing mode again, press t device

flashes Blue and Red.

•

Wait until connected.

Notes:

For improved compatibility and sound quality, we suggest that you use

Bluetooth devices with CSR chipset.

- 3 -

To take advantage of the better performance of the apeX Low Latency Codec,

the other side device must support the same codec. If the other side device

only supports the normal aptX codec, or the SBC one, those codecs will be

used instead.

Audio delay when paired with different headphones/receiver-

Headphones/receiver support - The audio delay will be

aptX Low Latency codec

aptX codec

SBC codec (most standard Bluetooth audio)

~ 40ms

~ 70ms

~ 220ms

- 2 -

• BT version: 5.0

• Supports profiles: A2DP, AVRCP

• Audio codec: SBC, aptX, aptX-LL, aptX-HD

• Operational range:

indoors: up to 50-70ft (without obstacles)

outdoors: up to 197ft (without obstacles)

• Input voltage/ current: Micro USB DC5.0V 500mA

• Operating temperature:-10°C ~ 45°C

• Storage temperature: -20°C ~ 60°C

• Support sampling rate in optical mode: ≤48KHz

• Product size: 126×94×29mm

• Product weight: 124g

1. Product Specifications

EVOLVEO AudioConverter XS is a wireless long range audio transmitter &

receiver incorporating the latest

“aptX low-latency” technology for CD-like

quality sound with virtually no delay.

Multifunctional, supporting optical and

bypass. Providing the best solution to

enable your TV or home audio system

to wirelessly stream hi-fi audio directly to

any wireless headphones or speakers.

- 7 -

4. LED indications

- 6 -

Button Function Operation

Power switch Slide to “ON” to turn on the device.Power on

Enter paring mode

Play / Pause

In AUX audio mode, short press once

(TX mode doesn’t support).

Volume down/

Previous song

In AUX audio mode, short press once.

(TX mode doesn’t support).

Slide to RX to enter receiving mode.

Mode switch

Receiver mode

Transmitter mode

Slide to TX to enter transmitting mode.

Short press once.Reconnect

Bypass mode Slide to “Bypass” to enter Bypass

mode.

Short press this button once to play/

pause music, (TX mode doesn’t

support).

Hold this button for about 3 seconds.

Volume up/

Next song

- 5 -

3. Product Overview & Control Functions

- 11 -

6. Use as a Receiver (RX mode) Installation diagram

- 12 -

- 14 -

Connect your speaker to "To Speaker" port with the audioAudioConverter XS

cable provided

(optical or AUX/RCA).

2) AudioConverter XSConnect to a power source with USB cable and adapter.

3) Slide Power switch to the "ON" position.

4) Slide Mode switch to the "RX" position.

5) AudioConverter XSPairing - Pair with your Bluetooth-enabled phone/PC/

tablet.

•

Set into pairing mode, RX LED flash Blue / RedAudioConverter XS

alternately fast.

–

First-time use: will auto enter pairing mode (with clearAudioConverter XS

memory).

– Afterward: press button for 3 seconds to enter.

•

Active Bluetooth on your phone or another device to find “ ” toEVO-XS

connect.

•

Wait and connected (For quick pairing, better keep them within 1 meter

when pairing).

● NFC enabled phones can connect this device easily with Near Field

Communication (NFC) function.

Bypassing means using as a non-Bluetooth device which AudioConverter XS

connects the TV

and speaker via wires directly. This design enables you to

switch between wired

(Bypass mode) and wireless (Bluetooth mode) with just

one switch without the

need to disconnect any cables.

Connect audio source (TV, DVD etc.) to “From TV" AudioConverter XS

port with the audio

cables provided (optical or AUX/ RCA).

Connect your speaker to "To Speaker" port with your AudioConverter XS

own audio cable

(optical or AUX/RCA).

3) Connect

AudioConverter XS

to a power source with USB

cable and adapter.

4) Slide Power switch to the "ON" position.

5) Slide the Mode switch to the "Bypass" position.

6) Ready for use.

7. Bypass mode (Non-Bluetooth) Installation diagram

- 16 -

- 18 -- 17 - - 19 -

In RX mode

1) Pair with the first device by following the previous instructions in the “Use as

a Receiver (RX mode)” section.

2) Pair with the second device

•

Set to pairing mode again, pressdevice button for 3s until the RX LED

flashes Blue and Red.

• Active Bluetooth on the second device to find “ ” to connect.EVO-XS

•

Wait until connected.

Note: Only one device can play music at any time. You must stop the music

on one device to play on the other.

9. Restore Factory Default Settings

You may need to reset if it is not working as expected. When is device device

reset to factory default settings, all the paired device information will be cleared.

●

Press and hold the buttons 5s until the RX/TX LED flashes Blue and Red.

10. Troubleshooting

1) I am having trouble pairing and connecting to my Bluetooth device.

Please check the following:

Your wireless device supports the wireless profiles listed in the specifications.

B03 and your device are next to each other or within 3 feet / 1 meter.

3. Make sure both

AudioConverter XS

and the wireless device are in pairing

mode.

After connecting and pairing with my wireless device, I cannot hear any music

from my sound system.

1. Make sure to remove the protective head on optical cable.

In Optical mode, AudioConverter XS support device with sampling rate under

48kHz.

Note: Need to make sure TV audio format is set to PCM(Fig17-1) and TV sound

out as “External Speakers”(Fig 17-2)

- 10 -- 9 -

5. Use as a transmitter (TX mode) Installation diagram

Connect audio source (TV, DVD etc.) to "From TV" portAudioConverter XS

with the audio

cables provided (optical or AUX/RCA).

Connect to a power source (TV, PC USB socket orAudioConverter XS

power adapter) with

a USB cable.

3) Slide Power switch to the "ON" position.

4) Slide Mode switch to the "TX" position.

5) AudioConverter XSPairing - Pair with your Bluetooth-enabled headsets/

speakers.

•

Set into pairing mode, TX LED flash Blue / RedAudioConverter XS

alternately fast.

–

First-time use: will auto enter pairing mode (with clearAudioConverter XS

memory).

– Afterward: press button for 3 seconds.

• Set your headsets/speakers to pairing mode refer to its user manual.

• Wait until connected (For quick pairing, better keep them within 1 meter

when pairing)

- 4 -

2. Package Contents:

A. EVOLVEO AudioConverter XS

B. Power adapter(optional)

C. 5V power cable

D. Optical cable

E. 3.5mm audio cable

3.5mm female to RCA male cable

G. User manual

H. Quick user guide

- 1 -

Contents

1. Product Specifications

2. Package Contents

3. Product Overview & Control Functions

4. LED indications

5. Use as a transmitter (TX mode) Installation diagram

6. Use as a Receiver (RX mode) Installation diagram

7. Bypass mode (Non-Bluetooth) Installation diagram

8. Pair and Connect two Devices Simultaneously

9. Restore Factory Default Settings

10. Troubleshooting

11. Warnnings

12. FCC Notice

Power switchMode switch

AudioConverter XS Back

TV optical

output

TV AUX Output

5V Power Cable

TV RCA Output

Option A

AUX cable

Option B

AUX + RCA cable

Option C

Optical cable

Speaker

AUDIO

Speaker

Slide to “OFF” to turn off the device.Power off

Bypass

Model: B03

Artis an3 Plus

Us er Guid e

Hello

- 13 -

Speaker optical

input

Speaker AUX inputSpeaker RCA input

AudioConverter XS Back

Option A

AUX cable

Option B

AUX + RCA cable

Option C

Optical cable

AudioConverter XS Back

TV optical

output

TV AUX Output TV RCA Output

Option A

AUX cable

Option B

AUX + RCA cable

Option C

Optical cable

Speaker optical

input

Speaker AUX inputSpeaker RCA input

Option A

AUX cable

Option B

AUX + RCA cable

Option C

Optical cable

11. Warnnings

Warranty service is limited to normal use. Any man-made damages such as from

connecting to an unsuitable power source, using an unsuitable device, or not

following the instructions, as well as damages that did not occur during

shipping,

repairs and adjustments not approved by the company, damages

from misuse,

inattention, or improper installation may cause the warranty to

be ineffective

immediately. This warranty does not include shipping fees.

Disposal: The symbol of crossed out container on the product, in the

literature or on the wrapping means that in the European Union all the electric

and electronic products, batteries and accumulators must be placed into the

separate salvage after finishing their lifetime. Do not throw these products into

the unsorted municipal waste

DECLARATION OF CONFORMITY

Hereby, the company Abacus Electric, s.r.o. declares that the EVOLVEO

AudioConverter XS is in compliance with the requirements of the standards and

regulations, relevant for the given type of device.

Find the complete text of Declaration of Conformity at ftp://ftp.evolveo.com/ce

www.evolveo.com

www.facebook.com/EvolveoCZ

Design and specification may be changed without prior notice.

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- 20 -

Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

NOTE 2:

Any changes or modifications to this unit not expressly approved by the

party responsible for compliance could void the user's authority to operate the equipment.

Fig17-1 Set your TV Audio

Format to “PCM”(IMPORTANT)

Fig17-2 Set your TV Speaker

to “External Speaker”

PCM

Dolby Digital

DTS

DTS Neo 2:5

Settings

Audio Format

Speakers

Internal speakers

External speakers

Headset

B03

Quick User Guide

www.1mii.com

Global customer services:

Europe:

E-mail: support-uk@1mii.com (UK )

support-de@1mii.com (DE)

support-fr@1mii.com (FR)

support-es@1mii.com (ES)

support-it@1mii.com (IT)

Asia:

E-mail: support-jp@1mii.com (JP )

North America:

E-mail: support@1mii.com (US )

support-ca@1mii.com (CA)

AudioConverter XS

www.evolveo.com

1 .2FCC Notice

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions:

(1)

This device may not cause harmful interference, and (2) this device must accept

any interference received, including interference that may cause undesired operation.

NOTE 1: This equipment has been tested and found to comply with the limits for

a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a residential

installation.

This equipment generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does cause harmful interference

to radio or television reception, which can be determined by turning the equipment

off and on, the user is encouraged to try to correct the interference by one or more

of the following measures:

Produkt Specifikationer

Mærke:	Evolveo
Kategori:	Ikke kategoriseret
Model:	AudioConverter XS

Har du brug for hjælp?

Hvis du har brug for hjælp til Evolveo AudioConverter XS stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Evolveo Manualer

Evolveo Jade 1 Manual

5 September 2024

Evolveo Jade 2 LTE Manual

5 September 2024

Evolveo FX 450 Manual

3 September 2024

Evolveo DoorPhone AP1 Manual

2 September 2024

Evolveo Ptero 4PS Manual

2 September 2024

Evolveo DoorPhone IK06 Manual

2 September 2024

Evolveo Terra NV4 Manual

2 September 2024

Evolveo Porta F16 Manual

2 September 2024

Evolveo Amp1 Manual

2 September 2024

Evolveo G750 Manual

2 September 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Elektron Overbridge Manual

26 November 2024

Elektron Sidstation Manual

26 November 2024

SKROSS World Adapter Pro+ Manual

26 November 2024

SKROSS PRO – World & USB Manual

26 November 2024

SoundTube IPD-RS82-EZ Manual

26 November 2024

Kramer 4x1VB Manual

26 November 2024

Kramer RC-63A Manual

26 November 2024

SoundTube IPD-HP82-EZ Manual

26 November 2024

Kramer RK-KVM-1U-PP3 Manual

26 November 2024

Gioteck VX-2 (PS3) Manual

26 November 2024