Extron SW USB Series Manual

Extron niet gecategoriseerd SW USB Series

Læs nedenfor 📖 manual på dansk for Extron SW USB Series (1 sider) i kategorien niet gecategoriseerd. Denne guide var nyttig for 5 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF
Side 1/1
68-1679-01
Rev. A
01 09
SW USB Series USB Switchers Setup Guide
Follow these steps to set up and start using the SW USB. (Refer
to the SW USB Series User’s Manual for details.)
1. Mount the SW USB on a rack shelf or under furniture, if
desired.
2. Connect host device(s) to one or more SW USB input
connectors, using A to B type USB cable in lengths of up to
15' (4.5 m).
3. Connect one or more peripheral USB devices (such as a
keyboard and/or mouse) to the USB Output Hub ports, using
USB cable in lengths of up to 15' (4.5 m).
If host emulation will be used (SW USB Plus only): Attach
a standard keyboard and/or mouse to output port 3 and/or
4, and set the appropriate DIP switch(es) to On. (If host
emulation is not used, connect devices to any desired port.)
4. If desired, connect an RS-232 cable to the SW USB’s RS-232
port and to a host computer or control system.
N The RS-232 computer or control system should not
be one of the source devices connected to any of the
input ports.
5. If desired, connect an external Extron A/V switcher to the
RS-232 Pass Thru port. This switcher can then be controlled
by commands sent via this port.
6. If using RS-232 pass-through to control an A/V switcher,
enter one of the following SIS commands via your
computer’s RS-232 interface to select a loop mode.
• E 1LOOP} (Loop 1 mode) — SIS commands are
sent via an RS-232 interface to the SW USB, which
passes them through the RS-232 Pass thru port to the
A/V switcher.
• E 0LOOP} (Loop 0 mode [default]) — In addition to
SIS commands being sent from the computer’s RS-232
interface to the A/V switcher via the RS-232 Pass
Thru port, the SW USB sends the SIS input selection
command X! to the A/V switcher via the RS-232 Pass !
Thru port, regardless of the method of input selection
(contact closure, front panel button, or SIS command).
7. If desired, connect a 2-button or 4-button contact closure
device to the SW USB’s Contact port.
8. If using a different external power supply from the provided
one, wire the two-pin captive screw connector to the power
supply.
9. Power on the system components in the following order:
. USB peripheral device(s)a
. The SW USB switcherb
c. The host device(s)
O PUT
R OTE
OUTPUT
L R
SW4 A ArsVG
100-240V 0.2A
50-60Hz
INPUTS
1
2
3
4
USB S WITC HED INP UTS
USB O UTP UTS HUB
Tx
Tx Rx
RS-232
RS-23
PASS THR
USB 3
USB 1 USB 2
USB 4
1.5A MAX
12V
PO RWE
+
PC 1 PC 2 PC 3 PC 4
OUS
ON
KEYBO
OFF
HOS
EMUL A ON
CONTACT
134
Flat Panel yDispla
Extron
SW4 VGA sAr
VGA/Audio Switcher
Desktop
PC #1
Desktop
PC #3
Desktop
PC #4
RS-232
Loop-Through
Extron
SW4 USB Plus
USB Switcher
USB
RS-232
RS-232
Control Syst em
Mouse
Keyboard
VGA
Outputs
Desktop
PC #2
SW4 USB Plus switcher in a KVM
(keyboard/video/mouse) switching application
USB S WITCHING INPUT
-232
USB OUTPUT
USB 1
PC 1 PC 2 PC 3 PC 4
USB 2
USB 4
0.4A MAX
12V
POWER
+
AAP 102
AUTO
SWITCH
USB O UT 1
USB O UT 2
USB 1 1 Rx
Extron
SW4 USB
USB Switcher
USB
Interactive Whiteboard
USB
USB
VTR001 AAP
Video:
RED
Channel
Horizo ntal
Sync
Pulse
Active Video
PC PC PC PC
Connection diagram for an SW4 USB switcher with
an interactive white board
Extron USA - West
Headquarters
+ 6800.633.987
I nside USA / Canada Only
+1.71 04.491.150
+1.71 74.491.151 FAX
Extron USA - East
+ 6800.633.987
I nside USA / Canada Only
+1.919.86 3.1794
+1.919.86 3.1797 FAX
Extron Europe
+80 0.3987.6673
I nside Europe Only
+31.3 5 03.4 3.404
+31.3 5 3.4 3.4 050 FAX
Extron Asia
+80 0.7339.8766
I nside As ia Only
+65.638 3.4400
+65.638 3.4664 FAX
Extron Japan
+81.3.3 511.7655
+81.3.3 511.7656 FAX
Extron China
+400 83.8 .1568
Inside ly China On
+86.21.3760.1568
+86.21.3760.1566 FA X
Extron Middle East
+971.4.2991800
+971.4.2991880 FAX
The Extron SW2 USB, SW4 USB, and SW4 USB Plus are two- and four-input USB switchers that allow
switching between multiple host devices and USB peripherals. They can be remotely set up and
controlled via a host computer or other control system that is attached to the rear panel RS-232 port.
Simple Instruction Set (SIS™) commands can be issued to the switcher from a computer using the
RS-232 Interface.

Produkt Specifikationer

Mærke: Extron
Kategori: niet gecategoriseerd
Model: SW USB Series

Har du brug for hjælp?

Hvis du har brug for hjælp til Extron SW USB Series stil et spørgsmål nedenfor, og andre brugere vil svare dig


niet gecategoriseerd Extron Manualer

Extron

Extron AVEdge 100 Manual

11 September 2024
Extron

Extron MLM 100 AAP Manual

11 September 2024
Extron

Extron MAAP 100 Manual

11 September 2024
Extron

Extron UCM 100 Manual

11 September 2024
Extron

Extron MLS 100 A Manual

11 September 2024
Extron

Extron VSW 2VGA A Manual

11 September 2024
Extron

Extron ACP 105 D Manual

11 September 2024
Extron

Extron XTP T HWP 101 4K Manual

11 September 2024
Extron

Extron CPM112R Manual

11 September 2024
Extron

Extron Cable Collar Kit Manual

11 September 2024

niet gecategoriseerd Manualer

Nyeste niet gecategoriseerd Manualer

StarTech.com

StarTech.com EC4S950 Manual

20 September 2024
StarTech.com

StarTech.com CB4S950 Manual

20 September 2024
StarTech.com

StarTech.com INTEBOX8 Manual

20 September 2024
StarTech.com

StarTech.com IC485S Manual

20 September 2024
StarTech.com

StarTech.com PCIE1RIS Manual

20 September 2024
StarTech.com

StarTech.com PEX1S552 Manual

20 September 2024
StarTech.com

StarTech.com MPEX2S1P552 Manual

20 September 2024
StarTech.com

StarTech.com MPEX4S552 Manual

20 September 2024
StarTech.com

StarTech.com PEX4S953 Manual

20 September 2024
StarTech.com

StarTech.com PEX4RISER Manual

20 September 2024