Festo CAMF-B-M25-G4 Manual

Festo niet gecategoriseerd CAMF-B-M25-G4

Læs nedenfor 📖 manual på dansk for Festo CAMF-B-M25-G4 (1 sider) i kategorien niet gecategoriseerd. Denne guide var nyttig for 2 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/1
Warning
Bridge Connector
CAMF M25-B- - G4
Brief description Festo Co KG SE & .
Postfach
73726 sslingen E
Deutschland
+49 711 347-0
www.festo.com
Translation:en
Purpose of the bridge connector
Bridge connectors serve to bypass emergency stop contactors, for the
reason a handheld terminal.to operate machine a without
Safety notes
Warning
Danger of personal injury due to electric shock!
Use the connector exclusively from systems a that have
protective voltage low (e.g. SELV or PELV according to EN
61131 2:2007).-
Warning
To avoid accidents caused by incorrect or abusive usage (e.g.
usage bridge - on non designated devices), the connector must
only be by or connected safety personnel people, who are
familiar with the risks.
Pay also attention to the subchapter "Application of Emergency
Stop Button and Stop Button on the Handheld Terminal" of the
chapter " Appendix: Machinery Safety" in the user manual of
the handheld terminal.
Warning
In case of incorrect installation or use, dangerous situations may arise.
This product insert must be kept throughout the entire service
life of the product.
The installation and application of the product may be
performed only by qualified personnel.
When using bridge connectors, no E-stop function is given by the
handheld terminal. Therefor an additional E-stop must be present
on the machine.
In case safety functions only are neutralised for parts of the
system/machine, other protective equipment have to be arranged
for these parts.
In case of disconnectable emergency stop devices (e.g. wearable
programming measures devices), appropriate have to be planned
to avoid the confusion between effectual effectual -and non control
devices.
An assessment of risk must be arranged (which risks arise when
using bridge connectors) and if necessary the contruction of the
machine and organizational arrangements must be adapted.
Caution
Machines can take damage if case of unplugging the bridge
connector - during operation, because of the missing hot plug
compatibility stationof the remote the unplugging affects as an
E-Stop.
Pin assignment
Mat.Nr. Name Producer Pins Pin -bridges
555676 17 -B- - CAMF M25 G4 Hummel 3- 5-6 4
8153040
2021-04
[8153042]


Produkt Specifikationer

Mærke: Festo
Kategori: niet gecategoriseerd
Model: CAMF-B-M25-G4

Har du brug for hjælp?

Hvis du har brug for hjælp til Festo CAMF-B-M25-G4 stil et spørgsmål nedenfor, og andre brugere vil svare dig




niet gecategoriseerd Festo Manualer

Festo

Festo SIES-Q8B-PS-K-L Manual

24 September 2024
Festo

Festo SIES-Q8B-PO-K-L Manual

24 September 2024
Festo

Festo SFL-6 Manual

24 September 2024
Festo

Festo DASP-V4-8-A-R1 Manual

24 September 2024
Festo

Festo CPX-FB40 Manual

24 September 2024
Festo

Festo HMVY-2 Manual

24 September 2024
Festo

Festo HMIO-AP-2 Manual

24 September 2024
Festo

Festo HMVY-3 Manual

24 September 2024
Festo

Festo HMVD-LP-DL25/40 Manual

24 September 2024
Festo

Festo HMIZB-E03 Manual

24 September 2024

niet gecategoriseerd Manualer

Nyeste niet gecategoriseerd Manualer