Festo DADG-D-F8-40 Manual

Festo Ikke kategoriseret DADG-D-F8-40

Læs nedenfor 📖 manual på dansk for Festo DADG-D-F8-40 (1 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 4 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/1
Translation of the original instructions
1 Applicable documents
All available documents for the product www.festo.com/pk.è
Document Product Contents
Instructions Holding brake DACS-...-S
Cylinder with holding brake DFLC/DFLG-...-S
Operating
Instruction manual from the
original manufacturer
Proximity sensor Contrinex DW-AD-603-M4 Installation
Tab. 1 Applicable documents
2 Safety
2.1 Safety instructions
Only assemble the product on components that are in a condition to be safely
operated.
Observe tightening torques. Unless otherwise specified, the tolerance
is±20%.
2.2 Intended use
Status monitoring of holding brakes DACS, DFLC und DFLG.
2.3 Foreseeable misuse
The inductive proximity sensor DADG-D-F8 is exclusively provided for status mon-
itoring and is not suitable as a safety-relevant test system.
3 Further information
Accessories www.festo.com/catalogue.è
Spare parts www.festo.com/spareparts.è
4 Product overview
4.1 Product range overview
4.1.1 Scope of delivery
1Proximity sensor (1x)
Fig. 1
4.1.2 Not in scope of delivery
2Holding brake (1x)
DACS-...-S,
Cylinder with holding brake
DFLC/DFLG-...-S
Fig. 2
4.2 Function
Holding brake status Signal status
Closed On
Open Off
Tab. 2 Status monitoring
5 Assembly
Fig. 3 Remove threaded pin
1. Depressurise holding brake .2
2. Unscrew the threaded pin[A] from the outer surface.
Fig. 4 Screw in the proximity sensor
1. Screw the proximity sensor into the thread[C] up to the stop. Use the1
hexagon(D) on the sensor.
ÄThe lock nut[B] does not rest on the outer surface.
2. Connect the proximity sensor .1
ÄThe signal lights up.
Fig. 5 Adjust proximity sensor
Unscrew the proximity sensor slowly until the signal goes out.1
Fig. 6 Adjust proximity sensor
Screw the proximity sensor in slowly until the signal lights up.1
Fig. 7 Lock the proximity sensor
Tighten the lock nut[B]. Tightening torque:4Nm
6 Technical data
DADG-D-F8
Mounting type Flush
Ambient temperature [°C] –25 ... 70+
Switching frequency f [Hz] 5000
Degree of protection IP67
Housing material Steel, phosphated
Cable material TPE-U (PUR)
Voltage drop Ud [V] £ 2
Tab. 3 Technical data
8107310
DADG-D-F8
Proximity sensor
Instructions | Assembly
8107310
2019-06
[8107312]
Festo SE & Co. KG
Ruiter Straße 82
73734 Esslingen
Germany
+49 711 347-0
www.festo.com


Produkt Specifikationer

Mærke: Festo
Kategori: Ikke kategoriseret
Model: DADG-D-F8-40

Har du brug for hjælp?

Hvis du har brug for hjælp til Festo DADG-D-F8-40 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Festo Manualer

Festo

Festo SAMH-F12-MK Manual

17 November 2024
Festo

Festo SFAB Manual

17 November 2024
Festo

Festo SASC-P4-A-M8-S Manual

17 November 2024
Festo

Festo SFAH Manual

17 November 2024
Festo

Festo DRRD-12 Manual

17 November 2024
Festo

Festo SDE3 Manual

17 November 2024
Festo

Festo SFTE Manual

17 November 2024
Festo

Festo CRVZS-5 Manual

17 November 2024
Festo

Festo DGC-8 Manual

17 November 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Kramer

Kramer VP-8X8 Manual

25 November 2024
Kramer

Kramer PT-2C Manual

25 November 2024
Lazer

Lazer Bob+ Manual

25 November 2024
Dometic

Dometic DPS 80 Manual

25 November 2024
Kramer

Kramer 102MX Manual

25 November 2024
Kramer

Kramer FC-18 Manual

25 November 2024
Kramer

Kramer DSP-62-UC Manual

25 November 2024
Tiger

Tiger SKF-H101 Manual

25 November 2024