Festo DADP-DGC-40-KF Manual

Festo Ikke kategoriseret DADP-DGC-40-KF

Læs nedenfor 📖 manual på dansk for Festo DADP-DGC-40-KF (2 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 2 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/2
3.
DADP-DGC
Shock absorber retainer
Festo SE & Co. KG
Ruiter Straße 82
73734 Esslingen
Germany
+49 711 347-0
www.festo.com
Assembly instructions
8174040
2022-11c
[8174042]
8174040
Translation of the original instructions
© 2023 all rights reserved to Festo SE & Co. KG
1 Applicable documents
All available documents for the product
èwww.festo.com/sp.
Document Product Table of contents
Operating instruction Linear drive DGC(I)
Assembly instructions Stop KYC
Operating instruction Intermediate-position module
DADM-DGC-25...40
Tab. 1: Applicable documents
2 Safety
2.1 Safety instructions
Only use the product in its original condition without unauthorised modifica-
tions.
Observe the tightening torques. Unless otherwise specified, the tolerance is
±20%.
2.2 Intended use
The shock absorber retainer fastens shock absorbersYSR(W)-DGC to the slide of
linear drivesDGC-...-GF/-KF/-FA or DGCI. Use the shock absorber retainer only in
combination with a counter part for the cushioning:
Stop KYC
Intermediate-position module DADM-DGC
3 Additional information
Contact the regional Festo contact if you have technical problems
èwww.festo.com.
Accessories èwww.festo.com/catalogue.
4 Product Range Overview
4.1 Scope of delivery
1
2
3
4
Fig.1
1
Shock absorber retainer (1x)
2
Centring sleeve (2x)
3
Screw (2x),
only with DADP-DGC-…-KF
4
Screw (2x)
4.2 Not in scope of delivery
5
Fig.2
5
Linear drive (1x)
DGC-...-GF
DGC-...-KF,
DGC-...-FA,
DGCI
6
Fig.3
6
Stop (1x/2x)
KYC
7
Fig.4
7
Shock absorber (1x/2x)
YSR(W)-DGC
8
Fig.5
8
Intermediate-position module
DADM-DGC
5 Assembly
5.1 Preparation for DADP-DGC-18…-40
ZW X YV
Fig.6
Check the slide of the linear drive .5
Steel slide:
Multi-piece slide[V]
Screws[W], spring pins[X] and plastic cover[Y]
Aluminium slide:
One-piece slide[Z]
5.2 Mounting shock absorber retainer
2
A
1
3
V
Fig. 7: Mounting on steel slide
2
A
1
4
Z
Fig. 8: Mounting on aluminium slide
1. Place the centring sleeves in the seats[A].2
2. Place the shock absorber holder on the centring sleeves .1 2
Select the appropriate screws / :3 4
shorter screws for multi-piece steel slide[V].3
longer screws for one-piece aluminium slide[Z].4
Two screws are left over with DADP-DGC-…-KF.
4. Tighten the screws / . Observe the tightening torque.3 4
DADP-DGC -18-GF -25-GF -32-GF -18-KF -25-KF -32-KF
Screw M5 x 303
Screw M5 x 30 M5 x 354
[Nm] 4 6
DADP-DGC -40-GF -40-KF -50 -63
Screw M6 x 35 3
Screw M6 x 35 M6 x 45 M8 x 454
[Nm] 8 10 25


Produkt Specifikationer

Mærke: Festo
Kategori: Ikke kategoriseret
Model: DADP-DGC-40-KF

Har du brug for hjælp?

Hvis du har brug for hjælp til Festo DADP-DGC-40-KF stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Festo Manualer

Festo

Festo DADP-DGC-40-KF Manual

30 September 2024
Festo

Festo MUC-50 Manual

30 September 2024
Festo

Festo EAHF-E24-60-P-D6 Manual

30 September 2024
Festo

Festo DARD-L8-20-S Manual

30 September 2024
Festo

Festo DADM-CK-90-2 Manual

25 September 2024
Festo

Festo CASM-S-D3-R7 Manual

25 September 2024
Festo

Festo CASM-S-D2-R3 Manual

25 September 2024
Festo

Festo VABS-S2-2S-N12-K1 Manual

25 September 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Lutec

Lutec Zelna Manual

30 September 2024
Lutec

Lutec Rola Manual

30 September 2024
Lutec

Lutec Stanos Manual

30 September 2024
XP-PEN

XP-PEN Star 05 Manual

30 September 2024
Mebby

Mebby Nose clean Manual

30 September 2024
Pioneer

Pioneer BDR-212V Manual

30 September 2024
AENO

AENO CR1S Manual

29 September 2024