Festo DASP-V4-8-A-R1 Manual

Festo niet gecategoriseerd DASP-V4-8-A-R1

Læs nedenfor 📖 manual på dansk for Festo DASP-V4-8-A-R1 (3 sider) i kategorien niet gecategoriseerd. Denne guide var nyttig for 2 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/3
DASP-V4-...-A-R1
Sensor mounting
Festo SE & Co. KG
Ruiter Straße 82
73734 Esslingen
Germany
+49 711 347-0
www.festo.com
Assembly instructions
8179836
2022-11
[8179838]
8179836
Translation of the original instructions
© 2022 all rights reserved to Festo SE & Co. KG
1 Applicable documents
All available documents for the product
èwww.festo.com/sp.
Document Product Contents
Operating instruction Proximity switch
CRSMT-8M-PS-24V-K-...
Tab. 1: Applicable documents
2 Safety
2.1 Safety instructions
Only mount the product on components that are in a condition to be safely
operated.
2.2 Intended use
The sensor mountingDASP-V4-8-A-R1 fastens proximity switches to the tie
rods of the standards-based cylinders CRDNG-32...-63.
The sensor mountingDASP-V4-12-A-R1 fastens proximity switches to the tie
rods of the standards-based cylinders CRDNG-80...-125.
3 Additional information
Contact the regional Festo contact if you have technical problems
èwww.festo.com.
Accessories èwww.festo.com/catalogue.
4 Product Range Overview
4.1 Scope of delivery
1
2
Fig.1
1
Sensor mounting (1x)
2
Threaded pin (1x)
4.2 Not in scope of delivery
3
4
Fig.2
3
Standards-based cylinder (1x)
CRDNG
4
Proximity switch (1x)
CRSMT-8M
5 Assembly
1
2
4
A
Fig.3
1. Position the sensor mounting on one of the tie rods[A].1
2. Lightly fix the sensor mounting with the threaded pin .1 2
3. Orient the proximity switch with the cable outlet to the centre of the4
cylinder so all switching positions are possible.
4. Place the proximity switch in the sensor mounting.4
1
4
Fig.4
1. Tighten the screw of the proximity switch .4
Spanner size: 1.5
Tightening torque:0.3Nm±20%
2. Position the sensor mounting and the proximity switch at the desired1 4
switching position.
2
Fig.5
Tighten the threaded pin . Tightening torque:0.8Nm±25%2


Produkt Specifikationer

Mærke: Festo
Kategori: niet gecategoriseerd
Model: DASP-V4-8-A-R1

Har du brug for hjælp?

Hvis du har brug for hjælp til Festo DASP-V4-8-A-R1 stil et spørgsmål nedenfor, og andre brugere vil svare dig




niet gecategoriseerd Festo Manualer

Festo

Festo SIES-Q8B-PS-K-L Manual

24 September 2024
Festo

Festo SIES-Q8B-PO-K-L Manual

24 September 2024
Festo

Festo SFL-6 Manual

24 September 2024
Festo

Festo DASP-V4-8-A-R1 Manual

24 September 2024
Festo

Festo CPX-FB40 Manual

24 September 2024
Festo

Festo HMVY-2 Manual

24 September 2024
Festo

Festo HMIO-AP-2 Manual

24 September 2024
Festo

Festo HMVY-3 Manual

24 September 2024
Festo

Festo HMVD-LP-DL25/40 Manual

24 September 2024
Festo

Festo HMIZB-E03 Manual

24 September 2024

niet gecategoriseerd Manualer

Nyeste niet gecategoriseerd Manualer