Festo DHAS-SCR12-H6 Manual

Festo niet gecategoriseerd DHAS-SCR12-H6

Læs nedenfor 📖 manual på dansk for Festo DHAS-SCR12-H6 (2 sider) i kategorien niet gecategoriseerd. Denne guide var nyttig for 4 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/2
Assembly instructions (Original: de)
8059331
1604
[8059333]
†‡
Rotary throughfeed
DHAS-SCR12-H6
Festo SE & Co. KG
Postfach
73726 Esslingen
Germany
+49 711 347-0
www.festo.com
1. Parts list
Rotary throughfeed DHAS-SCR12-H6 (1x)
22265d_1
1 Plug
2 Rotor
3 Stator
4 Plug
(1x)
(1x)
(1x)
(1x)
Rotary indexing table with energy throughfeed DHTG-...-P4E4/P4L12 (1x)
Not included in delivery:
22265d_2
5 Rotary indexing ta-
ble
6 Housing base
7 Cover
(1x)
(1x)
(1x)
2. Intended use
Rotary throughfeed DHAS-SCR12-H6:
Power transmission for endless rotations in the energy throughfeed of the ro-
tary indexing table DHTG-P4E4/-P4L12.
The rotary throughfeed works as a collector ring and is a wearing part.
3. Safety instructions and notes on mounting
Switch off power supply and compressed air before mounting work.
Observe the safety instructions ( applicable documents).
Do not connect or disconnect plug connectors when powered.
Information
Applicable documents
www.festo.com/sp
Operating instructions of the energy throughfeed DHTG-P4
4. Dismounting
To mount the rotary throughfeed:
Dismount worn rotary throughfeed in reverse sequence to mounting.
To dismount the plug connectors:
Press interlock on the socket.
5. Mounting
22265d_3
Place coupling (A) onto the
rotor 2 up to the stop.
22265d_4
Clamp coupling (A) with the
screw (B) to the rotor 2
.
Observe the tightening
torque.
22265d_5
Guide plug 4 through the
openings in the housing
bottom part 6.
Place lines carefully. Do not
pinch!
Attach stator 3 with the
2 screws (C) in the housing
bottom part 6.
Position cut-out of the
coupling (A) accordingly.
Observe the tightening
torque.
22265d_6
Orient protective sleeve (D).
The chamfer is below.
Place protective sleeve (D)
onto the coupling (A) up to
the stop.
22265d_7
Push plug 1 onto the
socket on the rotary
indexing table 5 until the
interlock catches.
Place lines carefully. Do not
pinch!
Place centring sleeves (F) in
the housing bottom part 6.
Position coupling (A).
Insert pins (G) into the cut-
outs on the coupling
counter-piece of the rotary
indexing table 5.
The piece can be held and ad-
justments made through the
opening (H).
22265d_8
Fasten housing bottom
part 6 with the screws (I)
on the rotary indexing
table 5.
Observe the tightening
torque.
22265d_9
Push plug 4 onto the
socket of the cover 7 until
the interlock engages.
Place lines carefully.
Do not pinch!
Place cover 7 in the
opening (H) with light
rotation motions.
22265d_10
Fasten cover 7 with the
threaded pins (E).
Observe the tightening
torque.
6. Technical data
DHAS-SCR12-H6
Note on materials Contains PWIS1) substances
1) PWIS = Paint-wetting impairment substances
2.9 Nm
_ 20 %
2.9 Nm
_ 20 %
0.2 Nm
_ 60 %
4
3
2
1
5
6
7
2
A
A
B
4
6
3
C
A
D
A
1
5
G
A
6
I
5
4
7
6
0.5 Nm
_ 55 %
7
E
F
6
H
H


Produkt Specifikationer

Mærke: Festo
Kategori: niet gecategoriseerd
Model: DHAS-SCR12-H6

Har du brug for hjælp?

Hvis du har brug for hjælp til Festo DHAS-SCR12-H6 stil et spørgsmål nedenfor, og andre brugere vil svare dig




niet gecategoriseerd Festo Manualer

Festo

Festo SIES-Q8B-PS-K-L Manual

24 September 2024
Festo

Festo SIES-Q8B-PO-K-L Manual

24 September 2024
Festo

Festo SFL-6 Manual

24 September 2024
Festo

Festo DASP-V4-8-A-R1 Manual

24 September 2024
Festo

Festo CPX-FB40 Manual

24 September 2024
Festo

Festo HMVY-2 Manual

24 September 2024
Festo

Festo HMIO-AP-2 Manual

24 September 2024
Festo

Festo HMVY-3 Manual

24 September 2024
Festo

Festo HMVD-LP-DL25/40 Manual

24 September 2024
Festo

Festo HMIZB-E03 Manual

24 September 2024

niet gecategoriseerd Manualer

Nyeste niet gecategoriseerd Manualer