Festo EAHF-E24-60-P-D4 Manual

Festo Ikke kategoriseret EAHF-E24-60-P-D4

Læs nedenfor 📖 manual på dansk for Festo EAHF-E24-60-P-D4 (1 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 6 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/1
EAHF-E24-...-P-D
Profile mounting
Festo SE & Co. KG
Ruiter Straße 82
73734 Esslingen
Germany
+49 711 347-0
www.festo.com
Assembly instructions
8203093
2023-12
[8203095]
8203093
Translation of the original instructions
© 2024 all rights reserved to Festo SE & Co. KG
1 Applicable documents
All available documents for the product
èwww.festo.com/sp.
Document Product Content
Operating instruction Axis ELGD
Tab. 1: Applicable documents
2 Safety
2.1 Safety instructions
Only mount the product on components that are in a condition to be safely
operated.
2.2 Intended use
The profile mounting fastens an axis ELGD to the slide of an axis ELGD of the next
larger size by the basic profile.
2.3 Training of qualified personnel
Work on the product may only be carried out by qualified personnel who can eval-
uate the work and detect dangers. Personnel must have the relevant mechanical
training.
3 Additional information
Contact the regional Festo contact if you have technical problems
èwww.festo.com.
Accessories èwww.festo.com/catalogue.
4 Product Range Overview
4.1 Scope of delivery
1
2
Fig. 1: Scope of delivery
1
Profile mounting (2x)
2
Screw (4x)
4.2 Not in scope of delivery
3
4
Fig. 2: Not included in the scope of
delivery
3
Base axis ELGD (1x)
4
Assembly axis ELGD (1x)
5 Assembly
3
A
2
1
Fig. 3: Fastening first profile mounting
Loosely attach the profile mounting[1] with the screws[2] to the slide[A] of
the base axis[3].
4
1
C
B
Fig. 4: Positioning assembly axis
Position the assembly axis[4] on the profile mounting[1].
ÄThe lug[B] lies in the slot[C] of the assembly axis[4].
1
2
A
4
B
3
Fig. 5: Fastening second profile mounting
Loosely attach the profile mounting[1] with the screws[2] to the slide[A] of
the base axis[3].
ÄThe lug[B] lies in the slot of the assembly axis[4].
4
1
2
Fig. 6: Mounting assembly axis
1. Press the assembly axis[4] against the profile mounting[1].
ÄThe assembly axis[4] is aligned at the right angle.
2. Press the profile mountings[1] against the assembly axis[4].
ÄThe profile mountings[1] are flush with the assembly axis[4].
3. Tighten the four screws[2]. Observe tightening torque.
EAHF-E24-...-P-... -D4 -D5 -D6
Screw M6x25 M5x25 M5x25
[Nm] 7.6±20% 5.0±20% 5.0±20%


Produkt Specifikationer

Mærke: Festo
Kategori: Ikke kategoriseret
Model: EAHF-E24-60-P-D4

Har du brug for hjælp?

Hvis du har brug for hjælp til Festo EAHF-E24-60-P-D4 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Festo Manualer

Festo

Festo SAMH-F12-MK Manual

17 November 2024
Festo

Festo SFAB Manual

17 November 2024
Festo

Festo SASC-P4-A-M8-S Manual

17 November 2024
Festo

Festo SFAH Manual

17 November 2024
Festo

Festo DRRD-12 Manual

17 November 2024
Festo

Festo SDE3 Manual

17 November 2024
Festo

Festo SFTE Manual

17 November 2024
Festo

Festo CRVZS-5 Manual

17 November 2024
Festo

Festo DGC-8 Manual

17 November 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Elektron

Elektron Overbridge Manual

26 November 2024
Elektron

Elektron Sidstation Manual

26 November 2024
SoundTube

SoundTube IPD-RS82-EZ Manual

26 November 2024
Kramer

Kramer 4x1VB Manual

26 November 2024
Kramer

Kramer RC-63A Manual

26 November 2024
SoundTube

SoundTube IPD-HP82-EZ Manual

26 November 2024
Kramer

Kramer RK-KVM-1U-PP3 Manual

26 November 2024
Gioteck

Gioteck VX-2 (PS3) Manual

26 November 2024