Festo EAHF-L2-25-P-D1 Manual

Festo Ikke kategoriseret EAHF-L2-25-P-D1

Læs nedenfor 📖 manual på dansk for Festo EAHF-L2-25-P-D1 (1 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 2 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/1
Translation of the original instructions
© 2020 all rights reserved to Festo SE & Co. KG
1 Applicable documents
All available documents for the product www.festo.com/sp.è
Document Product Contents
Surface-mounted actuator User documentation 3
Basic actuator4
Tab. 1
2 Safety
2.1 Safety instructions
Only mount the product on components that are in a condition to be safely
operated.
Observe tightening torques. Unless otherwise specified, the tolerance
is±20%.
2.2 Intended use
Mounting of a surface-mounted actuator on the slide of a basic actuator of3 4
the next largest size by the basic profile.
3 Additional information
Dimensions of the profile mounting and other accessories for actuators
èwww.festo.com/catalogue
4 Product Range Overview
4.1 Scope of delivery
1Profile mounting (2x)
2Screw (4x)
Fig. 1
4.2 Not in scope of delivery
3Surface-mounted actuator (1x):
Axis ELGC, ELFC;
Axis unit ELGS;
Mini slide EGSC;
Mini slide unit EGSS;
Cylinder EPCC;
Cylinder unit EPCE, EPCS
Fig. 2
4Basic actuator (1x):
Axis ELGC, ELFC
Fig. 3
5 Assembly
Fig. 4 Fasten the first profile mounting to the slide
Lightly fasten profile mounting to the slide[A] of the basic1
actuator with the screws .4 2
Fig. 5 Positioning surface-mounted actuator
Position the surface-mounted actuator on the profile mounting . 3 1
ÄLug[B] lies in the slot[C] of the surface-mounted actuator.
Fig. 6 Fasten second profile mounting to the slide
Fasten profile mounting to the slide[A] with the screws .1 2
ÄLug[B] lies in the slot[C] of the surface-mounted actuator .3
Fig. 7 Mounting surface-mounted actuator
1. Position surface-mounted actuator .3
2. Press the surface-mounted actuator against the profile mounting .3 1
ÄSurface-mounted actuator is oriented perpendicular.3
3. Tighten screws .2
EAHF-L2-...-P D1 D2 D3 D4
M3x10 M4x10 M5x16 M6x162 Screw
[Nm] 1.2 2.4 4.8 6.0
Tab. 2 Tightening torque
8132496
EAHF-L2-...-P-D...
Profile mounting
8132496
2020-05a
[8132498]
Assembly instructions
Festo SE & Co. KG
Ruiter Straße 82
73734 Esslingen
Germany
+49 711 347-0
www.festo.com


Produkt Specifikationer

Mærke: Festo
Kategori: Ikke kategoriseret
Model: EAHF-L2-25-P-D1

Har du brug for hjælp?

Hvis du har brug for hjælp til Festo EAHF-L2-25-P-D1 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Festo Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Café

Café GXSHC40N Manual

24 Oktober 2024
Powerplus

Powerplus POWPB90700 Manual

24 Oktober 2024
Powerplus

Powerplus POWPB90300 Manual

24 Oktober 2024
V7

V7 UDDS2 Manual

24 Oktober 2024
Balay

Balay 3HZ638000 Manual

24 Oktober 2024
VIZIO

VIZIO VQD50S-0809 Manual

24 Oktober 2024
VIZIO

VIZIO V4K50S-0809 Manual

24 Oktober 2024
Zhiyun

Zhiyun Cinepeer CM15 Manual

24 Oktober 2024
Zhiyun

Zhiyun Cinepeer C100 Manual

24 Oktober 2024
Totolink

Totolink X900UA Manual

24 Oktober 2024