Festo EAHF-L2-25-P-S Manual

Festo Ikke kategoriseret EAHF-L2-25-P-S

Læs nedenfor 📖 manual på dansk for Festo EAHF-L2-25-P-S (1 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 3 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/1
EAHF-L2-...-P-S
Profile mounting
Festo SE & Co. KG
Ruiter Straße 82
73734 Esslingen
Germany
+49 711 347-0
www.festo.com
Assembly instructions
8179869
2023-10c
[8179871]
8179869
Translation of the original instructions
© 2023 all rights reserved to Festo SE & Co. KG
1 Applicable documents
All available documents for the product
èwww.festo.com/sp.
Document Product Content
User documentation Actuator Assembly2
Tab. 1: Applicable documents
2 Safety
2.1 Safety instructions
Only mount the product on components that are in a condition to be safely
operated.
2.2 Intended use
The profile mounting fastens an actuator to a mounting surface via the basic2
profile.
2.3 Training of qualified personnel
Work on the product may only be carried out by qualified personnel who can eval-
uate the work and detect dangers. Personnel must have the relevant mechanical
training.
3 Additional information
Contact the regional Festo contact if you have technical problems
èwww.festo.com.
Accessories èwww.festo.com/catalogue.
4 Product Range Overview
4.1 Scope of delivery
1
Fig.1
1
Profile mounting (2x)
4.2 Not in scope of delivery
3
2
Fig.2
2
Actuator (1x):
Axis ELGC, ELFC;
Axis unit ELGS;
Mini slide EGSC;
Mini slide unit EGSS;
Quarter turn actuator DRRS;
Cylinder EPCC;
Cylinder unit EPCE, EPCS
3
Screw (2x)
5 Assembly
Fig. 3: Determine support spacings L and mounting points
Determine the required support spacingsL and mounting points of the
actuator Other applicable documents.è
1
A
2
B
Fig. 4: Positioning profile mountings
Position profile mountings at the support points of the actuator .1 2
ÄThe lug(A) is in slot(B).
1
3
Fig. 5: Mounting actuator
1. Select the screws suitable for the installation situation.3
2. Fasten the profile mountings on the mounting surface with screws .1 3
Observe maximum tightening torque.
EAHF-L2-...-P-S -25 -45
3Screw M4 M5
Max. tightening torque [Nm] 2.4 4.8
3. Repeat the mounting steps for all mounting points.


Produkt Specifikationer

Mærke: Festo
Kategori: Ikke kategoriseret
Model: EAHF-L2-25-P-S

Har du brug for hjælp?

Hvis du har brug for hjælp til Festo EAHF-L2-25-P-S stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Festo Manualer

Festo

Festo SAMH-F12-MK Manual

17 November 2024
Festo

Festo SFAB Manual

17 November 2024
Festo

Festo SASC-P4-A-M8-S Manual

17 November 2024
Festo

Festo SFAH Manual

17 November 2024
Festo

Festo DRRD-12 Manual

17 November 2024
Festo

Festo SDE3 Manual

17 November 2024
Festo

Festo SFTE Manual

17 November 2024
Festo

Festo CRVZS-5 Manual

17 November 2024
Festo

Festo DGC-8 Manual

17 November 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Kramer

Kramer VP-8X8 Manual

25 November 2024
Kramer

Kramer PT-2C Manual

25 November 2024
Lazer

Lazer Bob+ Manual

25 November 2024
Dometic

Dometic DPS 80 Manual

25 November 2024
Kramer

Kramer 102MX Manual

25 November 2024
Kramer

Kramer FC-18 Manual

25 November 2024
Kramer

Kramer DSP-62-UC Manual

25 November 2024
Tiger

Tiger SKF-H101 Manual

25 November 2024