Festo SME-8M-DS-24V-K-2,5-OE Manual

Festo Ikke kategoriseret SME-8M-DS-24V-K-2,5-OE

Læs nedenfor 📖 manual på dansk for Festo SME-8M-DS-24V-K-2,5-OE (1 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 5 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/1
Translation of the original instructions
1 About this document
1.1 Further applicable documents
All available documents for the product www.festo.com/pk.è
1.2 Safety
Before working on the electrics: switch off the voltage supply.
WARNING!
Risk of injury due to electric shock.
For the electric power supply, use only PELV circuits that ensure a reliable
electric disconnection from the mains network.
Observe IEC60204-1/EN60204-1.
1.3 Intended use
This product is intended for sensing the position of magnets (e.g. the piston posi-
tion) in Festo products. The device is intended for use in an industrial environ-
ment.
1.3.1 Area of application and approval
In combination with the UL inspection mark on the product, the information in this
section must also be observed in order to comply with the certification conditions
of Underwriters Laboratories Inc. (UL) for USA and Canada.
UL approval information
Product category code NRKH, NRKH7
File number E232949
Considered standards UL 60947-5-2
CAN/CSA C22.2 No. 60947-5-2
UL mark
Industrial Control Equipment
2MD1
Tab. 1
2 Electrical connection
SME-8M-DS-24V- -
M8/M8D M12 OE
Tab. 2
SME-8M-DO-24V- -
M8/M8D M12 OE
Tab. 3
SME-8M-ZS-24V- -
M8/M8D M12 OE
Tab. 4
3 Mechanical installation
Fig. 1
4 Technical data
4.1 Technical data UL
SME-8M- -24V-… …
Operating voltage range [VDC] 5…30
Ambient temperature [°C] –20…+70
Tab. 5
4.2 Technical data, general
SME-8M- -24V-… …
Operating voltage range [V AC/DC] 5…30
Max. output current [mA] 500
Max. output current in
mounting kit
[mA] 80
Max. switching capacity [W] 10
Max. switching capacity in
mounting kit
[W] 2.4
Ambient temperature [°C] –40…+70
Ambient temperature with
flexible cable installation
[°C] –5…+70
Degree of protection IP65, IP68
Tab. 6
8112707
SME-8M-...-24V-...
Proximity sensor
8112707
2019-05
[8112709]
Instructions| Operating
Festo SE & Co. KG
Ruiter Straße 82
73734 Esslingen
Germany
+49 711 347-0
www.festo.com


Produkt Specifikationer

Mærke: Festo
Kategori: Ikke kategoriseret
Model: SME-8M-DS-24V-K-2,5-OE

Har du brug for hjælp?

Hvis du har brug for hjælp til Festo SME-8M-DS-24V-K-2,5-OE stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Festo Manualer

Festo

Festo SAMH-F12-MK Manual

17 November 2024
Festo

Festo SFAB Manual

17 November 2024
Festo

Festo SASC-P4-A-M8-S Manual

17 November 2024
Festo

Festo SFAH Manual

17 November 2024
Festo

Festo DRRD-12 Manual

17 November 2024
Festo

Festo SDE3 Manual

17 November 2024
Festo

Festo SFTE Manual

17 November 2024
Festo

Festo CRVZS-5 Manual

17 November 2024
Festo

Festo DGC-8 Manual

17 November 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Elektron

Elektron Overbridge Manual

26 November 2024
Elektron

Elektron Sidstation Manual

26 November 2024
SoundTube

SoundTube IPD-RS82-EZ Manual

26 November 2024
Kramer

Kramer 4x1VB Manual

26 November 2024
Kramer

Kramer RC-63A Manual

26 November 2024
SoundTube

SoundTube IPD-HP82-EZ Manual

26 November 2024
Kramer

Kramer RK-KVM-1U-PP3 Manual

26 November 2024
Gioteck

Gioteck VX-2 (PS3) Manual

26 November 2024