Festo SMT-8M-A-NO-24V-E-7,5-OE Manual

Festo Ikke kategoriseret SMT-8M-A-NO-24V-E-7,5-OE

Læs nedenfor 📖 manual på dansk for Festo SMT-8M-A-NO-24V-E-7,5-OE (1 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 2 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/1
SMT-8M-A-NO-24V-E-...
Proximity sensor
Festo SE & Co. KG
Ruiter Straße 82
73734 Esslingen
Deutschland
+49 711 347-0
www.festo.com
Operating instructions
8159947
2021-06a
[8159949]
Translation of the original instructions
© 2021 all rights reserved to Festo SE & Co. KG
1 About this document
1.1 Applicable documents
All available documents for the product
è www.festo.com/sp.
2 Safety
2.1 Safety instructions
Before working on the electrical system: switch off the power supply.
WARNING
Risk of injury due to electric shock.
For the electric power supply, use only PELV circuits that ensure a reliable
electric disconnection from the mains network.
Observe IEC 60204-1/EN 60204-1.
2.2 Intended use
This product is intended for sensing the position of magnets (e.g. the piston
position) in products from Festo. The device is intended for use in an industrial
environment.
2.3 Area of application and approval
In combination with the UL inspection mark on the product, the information in this
section must also be observed in order to comply with the certification conditions
of Underwriters Laboratories Inc. (UL) for USA and Canada.
UL approval information
Product category code NRKH, NRKH7
File number E232949
Considered standards UL 60947-1, CAN/CSA C22.2 No. 60947-1
UL 60947-5-2, CAN/CSA C22.2 No. 60947-5-2
UL mark
Industrial Control Equipment
2MD1
Tab. 1: UL approval information
Only for connection to a NEC/CEC Class 2 supply.
The device shall be supplied from an isolating transformer having a secondary
listed fuse rated 1 A.
3 Mounting instructions
Fig.1
4 Electrical connection
SMT-8M-A-NO-24V-E-…-
M8/M8D M12 OE
Tab. 2
5 Technical data
SMT-8M-A-NO-…
Operating voltage range [V AC/DC] 5 … 30
Max. output current [mA] 100
Max. switching capacity [W] 2.8
Ambient temperature [°C] –40 … +85
Ambient temperature with
flexible cable installation
[°C] –20 … +85
Degree of protection IP65, IP68, IP69k
Tab. 3


Produkt Specifikationer

Mærke: Festo
Kategori: Ikke kategoriseret
Model: SMT-8M-A-NO-24V-E-7,5-OE

Har du brug for hjælp?

Hvis du har brug for hjælp til Festo SMT-8M-A-NO-24V-E-7,5-OE stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Festo Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Crosscall

Crosscall CORE-S5 Manual

25 Oktober 2024
Café

Café GXSHC40N Manual

24 Oktober 2024
Powerplus

Powerplus POWPB90700 Manual

24 Oktober 2024
Powerplus

Powerplus POWPB90300 Manual

24 Oktober 2024
V7

V7 UDDS2 Manual

24 Oktober 2024
Balay

Balay 3HZ638000 Manual

24 Oktober 2024
VIZIO

VIZIO VQD50S-0809 Manual

24 Oktober 2024
VIZIO

VIZIO V4K50S-0809 Manual

24 Oktober 2024
Zhiyun

Zhiyun Cinepeer CM15 Manual

24 Oktober 2024
Zhiyun

Zhiyun Cinepeer C100 Manual

24 Oktober 2024