Fisher & Paykel RF540ADUX4 Manual

Fisher & Paykel Køleskab RF540ADUX4

Læs nedenfor 📖 manual på dansk for Fisher & Paykel RF540ADUX4 (4 sider) i kategorien Køleskab. Denne guide var nyttig for 21 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/4

INSTALLATION INSTRUCTIONS

NZ AU GB AE HK SG IE EU CN IN

Refrigerator Surround Kit

E402B, RF402B, E442B, RF442B, E522B, RF522B, RF522W, RF522A, RF540A and RF610A models

continued >

IMPORTANT!

SAVE THESE INSTRUCTIONS

The models shown in this document may not be available in all markets and are subject to change at any time. For current details about model

and specification availability in your country, please go to our website www.fisherpaykel.com or contact your local Fisher & Paykel dealer.

1 Check that the internal cabinetry dimensions are correct (see Diagram 1a/b).

2 Unpack the refrigerator as per instructions on carton.

IMPORTANT!

Due to the size of the refrigerator(s), it is essential that assembly of the surround kit be undertaken with a minimum of two able-

bodied persons.

It is important to include adequate venting to the top of the refrigerator, to ensure efficient operation.

The installation of the refrigerator(s) can be at floor level as shown in Diagram 1a or installed above the toe kick board as in

Diagram1b.

Rollers and feet must be fitted.

Refrigerators installed above the toe kit should have a floor base constructed to support the total weight of the loaded

refrigerator(s) placed on it.

The placement of the 16mm MDF or plywood under the refrigerator(s) on either installation type is to allow the fitment of the bottom

trim that covers it. It is optional.

GETTING STARTED

This kit is designed to be used with models with a refrigerator height of between: 1695 – 1806mm with curved or flat door styling.

You can find the part number for each installation in Section 2.

To give the most integrated look, the kitchen cabinetry should be flush with the front of the refrigerator door.

Tools required (not included)

No. 2 drill bit – long.

Electric drill.

Phillips screwdriver.

1 x 16mm piece of MDF the same size as the base of the cavity (optional). Not needed if refrigerator is sitting

directly on the floor and not on raised toe kickarea.

Joiner kit (part number 819264) required if joining two refrigerators side by side.

REFRIGERATOR SURROUND KIT

E402B

RF402B

E402B

RF402B

E402B

RF402B

E442B

RF442B

E442B

RF442B

E442B

RF442B

E522B

RF522B

RF522W

E522B

RF522B

RF522W

E522B

RF522B

RF522W

RF522A RF540A

RF610A

REFRIGERATOR MODEL 1 X E402B

1 X RF402B

2 X E402B

2 X RF402B

1 X E442B

1 X RF442B

2 X E442B

2 X RF442B

1 X E522B

1 X RF522B

1 X RF522W

2 X E522B

2 X RF522B

2 X RF522W

1 X RF522A

(French door model)

1 X RF540A

1 X RF610A

(French door model)

CAVITY DIMENSIONS (Flush to edge of door) mm mm mm mm mm mm mm mm

AWidth 807 10721467 1557 962 1777 962852

BDepth* 700 700 700 700 700 700 700 700

C 1Height** 1790 1790 1790 1790 1790 1790 1790 1875

C 2Height*** 1806 1806 1806 1806 1806 1806 1806 1891

DAir vent depth 200 200 200 200 200 200 200 200

EAir vent width 502 1162 1252547 657 6571472 767

KIT PART NUMBERS LH RH LH RH LH RH

Brushed Stainless 24371 24372 24373 24375 2437624374 24377 24381 2438024378 24379

Plus Joiner Kit 819264 819264 819264

* Depth is a minimum requirement.

** Height is without 16mm MDF packer.

*** Height is with 16mm MDF packer.

Cavity dimensions above are to be used as dimensions.minimum

Diagram 1a

Refrigerator at floorlevel

Diagram 1b

Refrigerator above toekick

Diagram 1

KIT PART NUMBERS AND CAVITY DIMENSIONS TABLE

All dimensions are internal or cavity dimensions.

The refrigerator can be installed:

1 In a cavity with 16mm panel (bottom trim attached), or in a cavity where the product

is at floor level (no bottom trim). (Diagram 1a).

2 In a cavity with a toe kick under the product with the bottom trim fitted to the base

(Diagram 1b).

3 Check whether your fridge has hinges concealed by the front of the fridge door.

For refrigerators / freezers where the hinge is not concealed by the door refer to

spare parts for the correct kit number. 820413 D should list non concealed number kit.

BEFORE INSTALLATION

Concealed hinge Non concealed hinge

Produkt Specifikationer

Mærke:	Fisher & Paykel
Kategori:	Køleskab
Model:	RF540ADUX4
Vekselstrømsindgangsspænding:	220 - 240 V
Bredde:	900 mm
Dybde:	695 mm
Højde:	1790 mm
Produktfarve:	Rustfrit stål
Kontroltype:	Berøring
Energieffektivitetsklasse (gammel):	A+
Årligt energiforbrug:	416 kWh
Placering af apparat:	Fritstående
Inverter-teknologi:	Ja
Tilsluttet belastning:	- W
Støjniveau:	43 dB
Energieffektivitetsskala:	A+++ til D
Fryser, netto rumindhold:	128 L
Frysekapacitet:	10 kg/24t
Opbevaringstid under strømafbrydelse:	12 t
Klimaklasse:	T
Brugerdefineret panel klar:	Ingen
Køleskab antal hylder/kurve:	3
Antal grøntsagsskuffer:	2
Køleskabsdøre:	6
Køleskab, netto rumindhold:	413 L
Total netto kapacitet:	541 L
Understøtter VPN:	614 L
No Frost (køleskab):	Ja
Stjernebedømmelse:	4*
Fryser position:	Bottom-placeret
Hylder, materiale:	Glas
Ismaskine:	Ja
Multi-Airflow-system (køleskab):	Ja
No Frost (fryser):	Ja
Hurtig frys funktion:	Ja
Fryser antal hylder/kurve:	2
Åben dør alarm:	Ja
Bæredygtighedscertifikater:	ENERGY STAR
Isterning bakke:	Ja
Automatisk afrimning (køleskab):	Ja
Produktdesign:	Fransk dør
Vandbeholder:	Ja
Antal døre i fryser:	1