Fluke 393 FC Manual

Fluke Måleudstyr 393 FC

Læs nedenfor 📖 manual på dansk for Fluke 393 FC (32 sider) i kategorien Måleudstyr. Denne guide var nyttig for 6 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF
Side 1/32
393/393 FC
CAT III 1500V TRMS Clamp Meter
Calibration Manual
February 2022
© 2022 Fluke Corporation. All rights reserved.
Specifications are subject to change without notice.
All product names are trademarks of their respective companies.
LIMITED WARRANTY AND LIMITATION OF LIABILITY
Each Fluke product is warranted to be free from defects in material and workmanship under normal use and
service. The warranty period is three years and begins on the date of shipment. Parts, product repairs, and
services are warranted for 90 days. This warranty extends only to the original buyer or end-user customer of a
Fluke authorized reseller, and does not apply to fuses, disposable batteries, or to any product which, in Fluke's
opinion, has been misused, altered, neglected, contaminated, or damaged by accident or abnormal conditions of
operation or handling. Fluke warrants that software will operate ce with its functional substantially in accordan
specifications for 90 days and that it has been properly recorded on non-defective media. Fluke does not warrant
that software will be error free or operate without interruption.
Fluke authorized resellers shall extend this warranty on new and unused products to end-user customers only but
have no authority to extend a greater or different warranty on behalf of Fluke. Warranty support is available only if
product is purchased through a Fluke authorized sales outlet or Buyer has paid the applicable international price.
Fluke reserves the right to invoice Buyer for importation costs of repair/replacement parts when product purchased
in one country is submitted for repair in another country.
Fluke's warranty obligation is limited, at Fluke's option, to refund of the purchase price, free of charge repair, or
replacement of a defective product which is returned to a Fluke authorized service center within the warranty
period.
To obtain warranty service, contact your nearest Fluke authorized service center to obtain return authorization
information, then send the product to that service center, with a description of the difficulty, postage and insurance
prepaid (FOB Destination). Fluke assumes no risk for damage in transit. Following warranty repair, the product will
be returned to Buyer, transportation prepaid (FOB Destination). If Fluke determines that failure was caused by
neglect, misuse, contamination, alteration, accident, or abnormal condition of operation or handling, including
overvoltage failures caused by use outside the product’s specified rating, or normal wear and tear of mechanical
components, Fluke will provide an estimate of repair costs and obtain authorization before commencing the work.
Following repair, the product will be returned to the Buyer transportation prepaid and the Buyer will be billed for the
repair and return transportation charges (FOB Shipping Point).
THIS WARRANTY IS BUYER'S SOLE AND EXCLUSIVE REMEDY AND IS IN LIEU OF ALL OTHER
WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. FLUKE SHALL NOT BE LIABLE FOR ANY
SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LOSSES, INCLUDING LOSS OF
DATA, ARISING FROM ANY CAUSE OR THEORY.
Since some countries or states do not allow limitation of the term of an implied warranty, or exclusion or limitation
of incidental or consequential damages, the limitations and exclusions of this warranty may not apply to every
buyer. If any provision of this Warranty is held invalid or unenforceable by a court or other decision-maker of
competent jurisdiction, such holding will not affect the validity or enforceability of any other provision.
11/99
Fluke Corporation
P.O. Box 9090
Everett, WA 98206-9090
U.S.A.
Fluke Europe B.V.
P.O. Box 1186
5602 BD Eindhoven
The Netherlands
1
Introduction
XW Warning
Read Safety Information before you use the Product.
This manual explains the Performance Tests for the 393/393 FC CAT III 1500V TRMS
Clamp Meter (the Product). See the 393/393 FC Users Manual for usage information.
Contact Fluke
Fluke Corporation operates worldwide. For local contact information, go to our website:
www.fluke.com.
To register your product, view, print, or download the latest manual or manual
supplement, go to our website.
Fluke Corporation
P.O. Box 9090
Everett, WA 98206-9090
+1-425-446-5500
fluke-info@fluke.com
Safety
General Safety Information is in the printed Safety Information document that ships with
the Product and at www.fluke.com. More specific safety information is listed where
applicable.
A Warning identifies conditions and procedures that are dangerous to the user. A
Caution identifies conditions and procedures that can cause damage to the Product or
the equipment under test.
393/393 FC
Calibration Manual
2
Static Awareness
Semiconductors and integrated circuits can be damaged by electrostatic discharge
during handling. This notice explains how to minimize damage to these components.
1. Understand the problem.
2. Learn the guidelines for proper handling.
3. Use the proper procedures, packaging, and bench techniques.
Follow these practices to minimize damage to static sensitive parts.
XW Warning
To prevent electric shock or personal injury. De-energize the product and all
active circuits before opening a product enclosure, touching or handling any
PCBs or components.
• Minimize handling.
• Handle static-sensitive
parts by non-conductive
edges.
• Do not slide static-
sensitive components
over any surface.
• When removing plug-in
assemblies, handle only
by non-conductive
edges.
• Never touch open-edge
connectors except at a
static-free work station.
• Keep parts in the original
containers until ready for
use.
• Use static shielding
containers for handling and
transport.
• Avoid plastic, vinyl, and
polystyrene foam in the
work area.
• Handle static-sensitive
parts only at a static-
free work station.
• Put shorting strips on
the edge of the
connector to help
protect installed static-
sensitive parts.
• Use anti-static type
solder extraction tools
only.
• Use grounded-tip
soldering irons only.

Produkt Specifikationer

Mærke: Fluke
Kategori: Måleudstyr
Model: 393 FC

Har du brug for hjælp?

Hvis du har brug for hjælp til Fluke 393 FC stil et spørgsmål nedenfor, og andre brugere vil svare dig


Måleudstyr Fluke Manualer

Fluke

Fluke 323 True RMS Manual

14 September 2024
Fluke

Fluke FEV350 Manual

3 September 2024
Fluke

Fluke 319 Manual

22 August 2024
Fluke

Fluke T150/VDE Manual

22 August 2024
Fluke

Fluke 301E Manual

30 Juli 2024
Fluke

Fluke 3002 FC Manual

30 Juli 2024
Fluke

Fluke 362 Manual

30 Juli 2024
Fluke

Fluke 369 Manual

29 Juli 2024
Fluke

Fluke T130 Manual

29 Juli 2024
Fluke

Fluke 365 Manual

28 Juli 2024

Måleudstyr Manualer

Nyeste Måleudstyr Manualer

Phoenix Contact

Phoenix Contact EEM-EM157-EE Manual

4 Marts 2025
Senseca

Senseca GE114 Manual

27 Februar 2025
Senseca

Senseca GE100 Manual

27 Februar 2025
Senseca

Senseca GE173 Manual

27 Februar 2025
Senseca

Senseca GE151 Manual

27 Februar 2025
Senseca

Senseca GE135 Manual

27 Februar 2025
PCE Instruments

PCE Instruments PCE-DRG 10 Manual

25 Februar 2025
Mitutoyo

Mitutoyo 99MAD030D Manual

19 Februar 2025
Mitutoyo

Mitutoyo 99MAD030M2 Manual

19 Februar 2025
Mitutoyo

Mitutoyo 99MAD027M3 Manual

19 Februar 2025